Laser surface melting of nickel-based alloy reduces nickel release in the primary cooling system of a nuclear power plant - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Optics and Laser Technology Année : 2021

Laser surface melting of nickel-based alloy reduces nickel release in the primary cooling system of a nuclear power plant

Résumé

The surface of Ni-based alloy 690 was treated using a sub-microsecond pulsed laser in order to reduce the amount of nickel released when the surface is exposed to the primary cooling system of pressurized water nuclear reactors. A 2D array of laser treatment parameter sets was investigated. The results on sample surfaces was characterized using interferometric microscopy, Scanning Electron Microscopy (SEM), Glow Discharge Optical Emission Spectrometry (GDOES) and X-ray Photoelectron Spectrometry (XPS). The treatment leading to a continuous and defect-free chromine surface having the minimum nickel content over about the first two nanometers and no subsurface chromium depletion was selected for the nickel release test. This selection criterion proved to be very efficient as the total amount of nickel released in a standard qualification test using a simulated primary coolant was reduced, compared to a non-treated surface, by a factor of 7 during the heating phase and by a factor of 3.7 on average over the whole month-long test.
Fichier principal
Vignette du fichier
PIMM_OLT_2021_Pacquentin.pdf (6.2 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03331246 , version 1 (01-09-2021)

Identifiants

Citer

Wilfried Pacquentin, Lucille Gouton, Nadège Caron, Charles Brussieux, Marc Foucault, et al.. Laser surface melting of nickel-based alloy reduces nickel release in the primary cooling system of a nuclear power plant. Optics and Laser Technology, 2021, 144, pp.107401. ⟨10.1016/j.optlastec.2021.107401⟩. ⟨hal-03331246⟩
49 Consultations
28 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More