Solid-State Li-Ion Batteries Operating at Room Temperature Using New Borohydride Argyrodite Electrolytes

Anh Ha Dao (1) , Pedro López-Aranguren (2) , Junxian Zhang (1) , Fermin Cuevas (1) , Michel Latroche (1)

1 ICMPE - Institut de Chimie et des Matériaux Paris-Est
2 CIC EnergiGUNE (SPAIN)

Using a new class of (BH 4)− substituted argyrodite Li6PS5Z0.83(BH4)0.1, (Z = Cl, I) solid electrolyte, Li-metal solid-state batteries operating at room temperature have been developed. The cells were made by combining the modified argyrodite with an In-Li anode and two types of cathode: an oxide, Li x MO 2 (M = 1 / 3 Ni, 1 / 3 Mn, 1 / 3 Co; so called NMC) and a titanium disulfide, TiS 2. The performance of the cells was evaluated through galvanostatic cycling and Alternating Current AC electrochemical impedance measurements. Reversible capacities were observed for both cathodes for at least tens of cycles. However, the high-voltage oxide cathode cell shows lower reversible capacity and larger fading upon cycling than the sulfide one. The AC impedance measurements revealed an increasing interfacial resistance at the cathode side for the oxide cathode inducing the capacity fading. This resistance was attributed to the intrinsic poor conductivity of NMC and interfacial reactions between the oxide material and the argyrodite electrolyte. On the contrary, the low interfacial resistance of the TiS 2 cell during cycling evidences a better chemical compatibility between this active material and substituted argyrodites, allowing full cycling of the cathode material, 240 mAhg −1 , for at least 35 cycles with a coulombic efficiency above 97%.

Mots clés: solid-state batteries; argyrodites; ionic conductivity; solid electrolytes

Domaines: Matériaux; Energie électrique

Anh Ha Dao, Pedro López-Aranguren, Junxian Zhang, Fermin Cuevas, Michel Latroche. Solid-State Li-Ion Batteries Operating at Room Temperature Using New Borohydride Argyrodite Electrolytes. Materials, 2020, 13 (18), pp.4028. ⟨10.3390/ma13184028⟩. ⟨hal-02936753⟩