C. Gosselin and J. Angeles, Singularity analysis of closed loop kinematic chains, IEEE Transactions on Robotics and Automation, vol.6, issue.3, pp.281-290, 1990.

M. Conconi and M. Carricato, A New Assessment of Singularities of Parallel Kinematic Chains, IEEE Transactions on Robotics, vol.25, issue.4, pp.3-12, 2009.

D. Chablat and P. Wenger, Working modes and aspects in fully parallel manipulators, Proceedings, vol.3, pp.1964-1969, 1998.

A. Figielski, I. A. Bonev, and P. Bigras, Towards development of a 2-DOF planar parallel robot with optimal workspace use, IEEE International Conference on Systems, Man and Cybernetics, pp.1562-1566, 2007.

G. Gogu, Structural synthesis of fully-isotropic translational parallel robots via theory of linear transformations, European Journal of Mechanics, A/Solids, vol.23, issue.6, pp.1021-1039, 2004.

M. Carricato, Singularity-free fully-isotropic translational parallel manipulators, 2001.

J. Merlet, Redundant parallel manipulators, Laboratory Robotics and Automation, vol.8, issue.1, pp.17-24, 1996.

A. Müller, Redundant actuation of parallel manipulators, 2008.

V. Arakelian, S. Briot, and V. Glazunov, Increase of singularity-free zones in the workspace of parallel manipulators using mechanisms of variable structure, Mechanism and Machine Theory, vol.43, pp.1129-1140, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00451884

N. Rakotomanga, D. Chablat, and S. Caro, Kinetostatic performance of a planar parallel mechanism with variable actuation, Advances in Robot Kinematics: Analysis and Design, pp.311-320, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00322760

P. R. Mcaree and R. W. Daniel, An Explanation of Never-Special Assembly Changing Motions for 3-3 Parallel Manipulators, The International Journal of Robotics Research, vol.18, issue.6, pp.556-574, 1999.

M. Zein, P. Wenger, and D. Chablat, Singular Curves in the Joint Space and Cusp Points of 3-RPR Parallel Manipulators, Robotica, vol.25, issue.6, pp.717-724, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00160809

F. Bourbonnais, P. Bigras, and I. A. Bonev, Minimum-time trajectory planning and control of a pick-and-place five-bar parallel robot, IEEE/ASME Transactions on Mechatronics, vol.20, issue.2, pp.740-749, 2015.

D. N. Nenchev, S. Bhattacharya, and M. Uchiyama, Dynamic Analysis of Parallel Manipulators under the Singularity-Consistent Parameterization, Robotica, vol.15, issue.4, pp.375-384, 1997.

J. Hesselbach, M. Helm, and S. Soetebier, Connecting assembly modes for workspace enlargement, Advances in Robot Kinematics, pp.347-356, 2002.

C. K. Jui and Q. Sun, Path Tracking of Parallel Manipulators in the Presence of Force Singularity, Journal of Dynamic Systems, Measurement, and Control, vol.127, issue.4, p.550, 2005.

S. Briot and V. Arakelian, Optimal Force Generation in Parallel Manipulators for Passing through the Singular Positions, The International Journal of Robotics Research, vol.27, issue.8, pp.967-983, 2008.

S. K. Ider, Inverse dynamics of parallel manipulators in the presence of drive singularities, Mechanism and Machine Theory, vol.40, pp.33-34, 2005.

G. Pagis, N. Bouton, S. Briot, and P. Martinet, Enlarging parallel robot workspace through Type-2 singularity crossing, Control Engineering Practice, vol.39, pp.1-11, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01114340

R. Vertechy and V. Parenti-castelli, Robust, fast and accurate solution of the direct position analysis of parallel manipulators by using extrasensors, Parallel Manipulators, towards new applications, pp.133-154, 2008.

H. Saafi, M. A. Laribi, and S. Zeghloul, Forward kinematic model improvement of a spherical parallel manipulator using an extra sensor, Mechanism and Machine Theory, vol.91, pp.102-119, 2015.

R. Dahmouche, N. Andreff, Y. Mezouar, and P. Martinet, Efficient highspeed vision-based computed torque control of the orthoglide parallel robot, Proc of the IEEE International Conference on Robotics and Automation, pp.644-649, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00586390

J. P. Merlet, Solving the Forward Kinematics of a Gough-Type Parallel Manipulator with Interval Analysis, The International Journal of Robotics Research, vol.23, issue.3, pp.221-235, 2004.

A. Koessler, A. Goldsztejn, S. Briot, and N. Bouton, Certified Detection of Parallel Robot Assembly Mode under Type 2 Singularity Crossing Trajectories, IEEE International Conference on Robotics and Automation, pp.6073-6079, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01435808

J. Aubin and A. Cellina, Differential Inclusions, 1984.
URL : https://hal.archives-ouvertes.fr/hal-00915425

J. Merlet, Parallel Robots, 2006.
URL : https://hal.archives-ouvertes.fr/lirmm-00127856

S. Briot and W. Khalil, Dynamics of Parallel Robots: from Rigid Bodies to Flexible Elements, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01152660

L. Jaulin, M. Kieffer, O. Didrit, and E. Walter, Applied Interval Analysis, 2001.

R. E. Moore, R. B. Kearfott, and M. J. Cloud, Introduction to Interval Analysis, Society for Industrial and Applied Mathematics, 2009.

F. L. Bars, A. Bertholom, S. Jan, and L. Jaulin, Interval SLAM for underwater robots. A new experiment, IFAC Proceedings Volumes (IFAC-PapersOnline), pp.42-47, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00636026

L. Jaulin, Path planning using intervals and graphs, Reliable Computing, vol.7, issue.1, pp.1-15, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00845173

B. Martin, A. Goldsztejn, C. Jermann, and L. Granvilliers, Certified Parallelotope Continuation for One-Manifolds, SIAM Journal On Numerical Analysis, vol.51, issue.6, pp.3373-3401, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01408525

J. Vehí, I. Ferrer, and M. Á. Sainz, a Survey of Applications of Interval Analysis To Robust Control, IFAC Proceedings Volumes, vol.35, pp.389-400, 2002.

L. Jaulin and F. L. Bars, An Interval Approach for Stability Analysis

, Application to Sailboat Robotics, IEEE Transactions on Robotics, vol.29, issue.1, pp.282-287, 2013.

L. Jaulin and E. Walter, Set inversion via interval analysis for nonlinear bounded-error estimation, Automatica, vol.29, issue.4, pp.1053-1064, 1993.

D. Daney, Interval methods for certification of the kinematic calibration of parallel robots, IEEE Int. Conf. on Robotics and Automation, pp.1913-1918, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00990060

M. R. Pac and D. O. Popa, Interval analysis for robot precision evaluation, Proceedings -IEEE International Conference on Robotics and Automation, pp.1087-1092, 2012.

M. Tannous, S. Caro, and A. Goldsztejn, Sensitivity analysis of parallel manipulators using an interval linearization method, Mechanism and Machine Theory, vol.71, pp.93-114, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00910915

A. Goldsztejn, S. Caro, and G. Chabert, A three-step methodology for dimensional tolerance synthesis of parallel manipulators, Mechanism and Machine Theory, vol.105, pp.213-234, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01721237

D. Oetomo, D. Daney, B. Shirinzadeh, and J. Merlet, An Interval-Based Method for Workspace Analysis of Planar Flexure-Jointed Mechanism, Journal of Mechanical Design, vol.131, issue.1, pp.1-14, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00907597

S. Caro, D. Chablat, A. Goldsztejn, D. Ishii, and C. Jermann, A branch and prune algorithm for the computation of generalized aspects of parallel robots, Artificial Intelligence, vol.211, issue.1, pp.34-50, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00971348

F. Benhamou, F. Goualard, L. Granvilliers, and J. Puget, Revising hull and box consistency, Proc. of the 16th Int. Conf. on Logic Programming, pp.230-244, 1999.

I. Araya, G. Trombettoni, and B. Neveu, A contractor based on convex interval Taylor," in Integration of AI and OR Techniques in Contraint Programming for Combinatorial Optimzation Problems, pp.1-16, 2012.

T. Kapela and P. Zgliczy?ski, A Lohner-type algorithm for control systems and ordinary differential inclusions, Discrete and Continuous Dynamical Systems -Series B, vol.11, issue.2, pp.365-385, 2008.

D. Daney, N. Andreff, G. Chabert, and Y. Papegay, Interval method for calibration of parallel robots: Vision-based experiments, Mechanism and Machine Theory, vol.41, pp.929-944, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00907729

P. Poignet, N. Ramdani, and O. A. Vivas, Robust Estimation of Parallel Robot Dynamic Parameters with Interval Analysis, IEEE Conference on Decision and Control, pp.6503-6508, 2003.

A. Joubair and I. A. Bonev, Comparison of the efficiency of five observability indices for robot calibration, Mechanism and Machine Theory, vol.70, pp.254-265, 2013.

W. Khalil and E. Dombre, Modélisation, identification et commande des robots. Hermès Science, 1999.

M. Gautier and S. Briot, Global Identification of Joint Drive Gains and Dynamic Parameters of Parallel Robots, Multibody System Dynamics, vol.33, issue.1, pp.3-26, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00862322

S. Briot, N. Bouton, and P. Bigras, Controlling parallel robots during singular assembly mode changing, International Conference on Multibody System Dynamics, pp.116-128, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01285927

D. Six, S. Briot, A. Chriette, and P. Martinet, A Controller Avoiding Dynamic Model Degeneracy of Parallel Robots During Singularity Crossing, Journal of Mechanisms and Robotics, vol.9, issue.5, pp.1-8, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01307366

A. Koessler, N. Bouton, S. Briot, B. C. Bouzgarrou, and Y. Mezouar, Linear Adaptive Computed Torque Control for Singularity Crossing of Parallel Robots, 22nd CISM IFToMM Symposium on Robot Design, pp.1-8, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02099955

G. Chabert and L. Jaulin, Contractor programming, Artificial Intelligence, vol.173, issue.11, pp.1079-1100, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00428957

, He is currently postdoctoral fellow in FactoLab, Institut Pascal. His research interests include kinematic and dynamic modeling of robots, Adrien Koessler recieved his engineer degree from Institut Français de Mécanique Avancée and his masters degree in robotics from Université Blaise Pascal, 2015.

, and his Ph.D. in Computer Science from the University of Nice-Sophia Antipolis in 2005. He has spent one year as a postdoctoral fellow in the University of Central Arkansas and the University of California Irvine. He is full time CNRS researcher since 2007. His research interests include interval analysis and its application to constraint satisfaction, Alexandre Goldsztejn received his engineer degree from the Institut Supérieur d'Electronique et du Numérique, 2001.

, Then, he began a PhD thesis, under the supervision of Prof. Vigen Arakelian, at the INSA of Rennes and received the PhD degree in 2007. He worked at the Ecole de Technologie Suprieure of Montreal (Canada) with Prof. Ilian Bonev as a postdoctorate fellow in 2008. Since 2009, he is a full-time CNRS researcher at the LS2N (ex-IRCCyN Lab.) in Nantes (France), Sébastien Briot received the B.S. and M.S. degrees in Mechanical Engineering in 2004 from the National Institute of Applied Sciences (INSA) of Rennes (France)

. Dr, he received two other awards: the Award for the Best Young Researcher from the French Region Bretagne and the Award for the Best Young Researcher from the French Section of the, American Society of Mechanical Engineering, 2011.

, He is associate professor at SIGMA Clermont since 2010. His research interests include automatic, nonlinear control theory, in 2006 and his Ph.D. in Engineering Sciences and Mechatronics from Uniersité, 2006.