3D fibre architecture of fibre-reinforced sand

I. Soriano (1) , E. Ibraim (2) , Edward Ando (3, 4) , A. Diambra (2) , T. Laurencin (4, 5) , P. Moro , G. Viggiani (4, 3)

1 Edin. - University of Edinburgh
2 Department of Civil Engineering [Bristol]
3 GéoMécanique
4 3SR - Laboratoire sols, solides, structures - risques [Grenoble]
5 CoMHet - Mécanique et Couplages Multiphysiques des Milieux Hétérogènes

The mechanical behaviour of fibre-reinforced sands is primarily governed by the three-dimensional fibre architecture within the sand matrix. In laboratory, the normal procedures for sample preparation of fibre-sand mixtures generally produce a distribution of fibre orientations with a preferential bedding orientation, generating strength anisotropy of the composite's response under loading. While demonstrating the potential application of X-ray tomography to the analysis of fibre-reinforced soils, this paper provides for the first time a direct experimental description of the three-dimensional architecture of the fibres induced by the laboratory sample fabrication method. Miniature fibre reinforced sand samples were produced using two widely used laboratory sample fabrication techniques: the moist tamp-ing and the moist vibration. It is shown that both laboratory fabrication methods create anisotropic fibre orientation with preferential sub-horizontal directions. The fibre orientation distribution does not seem to be affected by the concentration of fibres, at least for the fibre concentrations considered in this study and, for both fabrication methods, the fibre orientation distribution appears to be axisymmetric with respect to the vertical axis of the sample. The X-ray analysis also demonstrates the presence of an increased porosity in the fibre vicinity, which confirms the assumption of the "stolen void ratio" effect adopted in previous constitutive modelling. A fibre orientation distribution function is tested B E. Ibraim and a combined experimental and analytical method for fibre orientation determination is further validated.

Domaines: Mécanique des solides [physics.class-ph]; Mécanique des matériaux [physics.class-ph]; Science des matériaux [cond-mat.mtrl-sci]; Mécanique statistique [cond-mat.stat-mech]; Matériaux

I. Soriano, E. Ibraim, Edward Ando, A. Diambra, T. Laurencin, et al.. 3D fibre architecture of fibre-reinforced sand. Granular Matter, 2017, 19 (75), ⟨10.1007/s10035-017-0760-3⟩. ⟨hal-02083359⟩