G. Mendonça, D. Mendonça, F. Aragão, and L. Cooper, Advancing dental implant surface technology-from micron-to nanotopography, Biomaterials, vol.29, issue.28, pp.3822-3835, 2008.

D. Novovic, R. Dewes, D. Aspinwall, W. Voice, and P. Bowen, The effect of machined topography and integrity on fatigue life, International Journal of Machine Tools and Manufacture, vol.44, issue.2, pp.125-134, 2004.

S. Morita, M. Abe, K. Yokoyama, and Y. Sugawara, Defects and their charge imaging on semiconductor surfaces by noncontact atomic force microscopy and spectroscopy, Journal of Crystal Growth, vol.210, issue.1, pp.408-415, 2000.

C. Kahloun, R. Badji, B. Bacroix, and M. Bouabdallah, Contribution to crystallographic slip assessment by means of topographic measurements achieved with atomic force microscopy, Materials Characterization, vol.61, issue.9, pp.835-844, 2010.

P. Franciosi, L. Le, G. Monnet, C. Kahloun, and M. Chavanne, Investigation of slip system activity in iron at room temperature by SEM and AFM in-situ tensile and compression tests of iron single crystals, International Journal of Plasticity, vol.65, pp.226-249, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01830620

K. J. Ramos, D. E. Hooks, and D. F. Bahr, Direct observation of plasticity and quantitative hardness measurements in single crystal cyclotrimethylene trinitramine by nanoindentation, Philosophical Magazine, vol.89, pp.2381-2402, 2009.

Q. Shi, F. Latourte, F. Hild, and S. Roux, Backtracking depth-resolved microstructures for crystal plasticity identification-Part 1: Backtracking microstructures, JOM, vol.69, issue.12, pp.2810-2818, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01674542

Q. Shi, F. Latourte, F. Hild, and S. Roux, Backtracking depth-resolved microstructures for crystal plasticity identification-Part 2: Identification, JOM, vol.69, issue.12, pp.2803-2809, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01674541

A. P. Tafti, A. B. Kirkpatrick, Z. Alavi, H. A. Owen, and Z. Yu, Recent advances in 3D SEM surface reconstruction, Micron, vol.78, pp.54-66, 2015.

C. A. Volkert and A. M. Minor, Focused ion beam microscopy and micromachining, MRS bulletin, vol.32, issue.5, pp.389-399, 2007.

S. Reyntjens and R. Puers, Focused ion beam induced deposition: fabrication of three-dimensional microstructures and Young's modulus of the deposited material, Journal of Micromechanics and Microengineering, vol.10, issue.2, p.181, 2000.

M. Groeber, B. Haley, M. Uchic, D. Dimiduk, and S. Ghosh, 3D reconstruction and characterization of polycrystalline microstructures using a FIB-SEM system, Materials Characterization, vol.57, issue.4-5, pp.259-273, 2006.

N. Zaafarani, D. Raabe, R. Singh, F. Roters, and S. Zaefferer, Three-dimensional investigation of the texture and microstructure below a nanoindent in a Cu single crystal using 3D EBSD and crystal plasticity finite element simulations, Acta Materialia, vol.54, issue.7, pp.1863-1876, 2006.

M. Calcagnotto, D. Ponge, E. Demir, and D. Raabe, Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD, Materials Science and Engineering: A, vol.527, issue.10-11, pp.2738-2746, 2010.

J. Guyon, N. Gey, D. Goran, S. Chalal, and F. Pérez-willard, Advancing FIB assisted 3D EBSD using a static sample setup, Ultramicroscopy, vol.161, pp.161-167, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01515195

G. Koenig, W. Nickel, J. Storl, D. Meyer, and J. Stange, Digital stereophotogrammetry for processing SEM data, Scanning, vol.9, issue.5, pp.185-193, 1987.

W. Lockwood and A. Reynolds, Use and verification of digital image correlation for automated 3D surface characterization in the scanning electron microscope, Materials Characterization, vol.42, issue.2, pp.52-59, 1999.

T. Zhu, M. A. Sutton, N. Li, J. Orteu, N. Cornille et al., Quantitative stereovision in a scanning electron microscope, Experimental Mechanics, vol.51, pp.97-109, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01644885

A. Geiger, M. Roser, and R. Urtasun, Efficient large-scale stereo matching, Asian conference on computer vision, pp.25-38, 2010.

S. Yan, A. Adegbule, and T. C. Kibbey, A hybrid 3D SEM reconstruction method optimized for complex geologic material surfaces, Micron, vol.99, pp.26-31, 2017.

E. Binaghi, I. Gallo, G. Marino, and M. Raspanti, Neural adaptive stereo matching, vol.25, pp.1743-1758, 2004.

A. P. Tafti, J. D. Holz, A. Baghaie, H. A. Owen, M. M. He et al., 3DSEM++: Adaptive and intelligent 3D SEM surface reconstruction, Micron, vol.87, pp.33-45, 2016.

J. Lebiedzik, Multiple detecter method for quantitative determination of microtopography in the SEM, Scanning Electron Microscopy, pp.181-188, 1975.

J. Lebiedzik, An automatic topographical surface reconstruction in the SEM, Scanning, vol.2, issue.4, pp.230-237, 1979.

B. K. Horn, Understanding image intensities, Artificial intelligence, vol.8, issue.2, pp.201-231, 1977.

T. Suganuma, Measurement of surface topography using SEM with two secondary electron detectors, Journal of Electron Microscopy, vol.34, issue.4, pp.328-337, 1985.

Q. Shi, F. Latourte, F. Hild, and S. Roux, Quaternion correlation for tracking crystal motions, Measurement Science and Technology, vol.27, issue.9, p.95006, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01383950

P. Howell, Taking, presenting and treating stereo data from the SEM, Scanning electron microscopy, pp.697-706, 1975.

A. Boyde, Quantitative photogrammetric analysis and qualitative stereoscopic analysis of SEM images, Journal of Microscopy, vol.98, issue.3, pp.452-471, 1973.

H. Teyssedre, S. Roux, G. Régnier, and A. Tracz, Filtering out slow-scan drifts in atomic force microscopy images, The Journal of Strain Analysis for Engineering Design, vol.46, issue.5, pp.361-367, 2011.

Q. Shi, S. Roux, F. Latourte, F. Hild, D. Loisnard et al., On the use of SEM correlative tools for in situ mechanical tests, Ultramicroscopy, vol.184, pp.71-87, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01674581

Z. Tomi?-cevi´ccevi´c, F. Hild, and S. Roux, Mechanics-aided digital image correlation, Journal of Strain Analysis for Engineering Design, vol.48, pp.330-343, 2013.

G. Nolze, Image distortions in SEM and their influences on EBSD measurements, Ultramicroscopy, vol.107, issue.2-3, pp.172-183, 2007.

P. Munroe, The application of focused ion beam microscopy in the material sciences, Materials Characterization, vol.60, issue.1, pp.2-13, 2009.

M. A. Groeber and M. A. Jackson, DREAM.3D: A digital representation environment for the analysis of microstructure in 3D, Integrating Materials and Manufacturing Innovation, vol.3, issue.1, p.5, 2014.

R. T. Frankot and R. Chellappa, A method for enforcing integrability in shape from shading algorithms, IEEE Transactions on Pattern Analysis and Machine Intelligence, vol.10, issue.4, pp.439-451, 1988.

J. Alkorta, Limits of simulation based high resolution EBSD, Ultramicroscopy, vol.131, pp.33-38, 2013.

A. Wilkinson, G. Meaden, and D. Dingley, High-resolution elastic strain measurement from electron backscatter diffraction patterns: New levels of sensitivity, Ultramicroscopy, vol.106, pp.307-313, 2006.