Assessment of the apparent bending stiffness and damping of multilayer plates; modelling and experiment - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Journal of Sound and Vibration Année : 2018

Assessment of the apparent bending stiffness and damping of multilayer plates; modelling and experiment

Résumé

In the context of aeronautics, automotive and construction applications, the design of light multilayer plates with optimized vibroacoustical damping and isolation performances remains a major industrial challenge and a hot topic of research. This paper focuses on the vibrational behavior of three-layered sandwich composite plates in a broad-band frequency range. Several aspects are studied through measurement techniques and analytical modelling of a steel/polymer/steel plate sandwich system. A contactless measurement of the velocity field of plates using a scanning laser vibrometer is performed, from which the equivalent single layer complex rigidity (apparent bending stiffness and apparent damping) in the mid/high frequency ranges is estimated. The results are combined with low/mid frequency estimations obtained with a high-resolution modal analysis method so that the frequency dependent equivalent Young's modulus and equivalent loss factor of the composite plate are identified for the whole [40 Hz-20 kHz] frequency band. The results are in very good agreement with an equivalent single layer analytical modelling based on wave propagation analysis (model of Guyader). The comparison with this model allows identifying the frequency dependent complex modulus of the polymer core layer through inverse resolution. Dynamical mechanical analysis measurements are also performed on the polymer layer alone and compared with the values obtained through the inverse method. Again, a good agreement between these two estimations over the broad-band frequency range demonstrates the validity of the approach.
Fichier principal
Vignette du fichier
JSV_Ege_etal_2018_HAL.pdf (6.94 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01778160 , version 1 (25-04-2018)

Identifiants

Citer

Kerem Ege, N.B. Roozen, Quentin Leclere, R.G. Rinaldi. Assessment of the apparent bending stiffness and damping of multilayer plates; modelling and experiment. Journal of Sound and Vibration, 2018, 426, pp.129-149. ⟨10.1016/j.jsv.2018.04.013⟩. ⟨hal-01778160⟩
130 Consultations
685 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More