Hybrid analytical and integral methods for simulating HTS materials

Kévin Berger (1) , Loïc Quéval (2) , Frédéric Trillaud (3) , Guillaume Escamez (4) , Brahim Ramdane (4) , Guillaume Dilasser (5) , Hocine Menana (1) , Jean Lévêque (1)

1 GREEN - Groupe de Recherche en Energie Electrique de Nancy
2 GeePs - Laboratoire Génie électrique et électronique de Paris
3 Instituto de Ingeniería [Mexico]
4 G2ELab - Laboratoire de Génie Electrique de Grenoble
5 IRFU - Institut de Recherches sur les lois Fondamentales de l'Univers

High Temperature Superconductors (HTS) are promising for applications requiring high power densities, such as superconducting electrical motors. Various approaches have been developed to model HTS, in particular for AC losses evaluation in thin wires and tapes. Indeed, AC losses are one of the key factors to size properly the cryogenic systems. In some applications, where the HTS materials are used as magnetic screens or as permanent magnets, such as in electrical motors, it is relevant to estimate properly the penetration of the magnetic field in order to optimize the magnetization processes and the integration of these materials in such systems. In previous works [1]–[3], analytical tools in 2D have been successfully developed for calculating the magnetic field distribution in different devices integrating HTS bulks by considering them as perfect diamagnetic materials, e.g. a superconducting electrical machine or an inductor with an iron core used for the pulsed field magnetization of a bulk HTS. These methods provide continuous derivatives and are useful tools for the design and optimization of such systems. They lead to meaningful solutions with helpful physical insights. However, they are limited to simple geometries and do not take into account either eddy currents or the variation of the critical current density with the magnetic field, which is crucial in HTS. On the other hand, rapid modeling approaches are needed, and the use of classical numerical tools is often ineffective in the design and optimization process due to considerable calculation time. Specific numerical approaches ensuring a better compromise between precision and calculation time are still required. In this context, the present work presents a hybrid model in which the HTS behavior is represented by the power law E(J, B) = Ec (J /Jc (B)) ^ n(B), taking into account the variation of the critical current density and the power exponent with respect to the magnetic flux density. The magnetic vector potential, the magnetic field and the current density distributions are computed by means of analytical and integral equations implemented on MATLAB. The resolution of the obtained stiff ordinary differential equations are performed using available solvers in MATLAB with adaptive time steps. The integral equations used to calculate the induced currents in the HTS materials are based on the well-known “Brandt method” developed in 1996 for strips and slabs, and later for disks and cylinders in an axial magnetic field. One of the main advantage of the hybrid method proposed here is that only the active parts are discretized. Distributions of the magnetic field over time and other quantities such as losses are presented. Calculation times for the studied problems are given and compared with those obtained from classical FEM software.

Domaines: Electromagnétisme; Supraconductivité [cond-mat.supr-con]; Modélisation et simulation

Kévin Berger, Loïc Quéval, Frédéric Trillaud, Guillaume Escamez, Brahim Ramdane, et al.. Hybrid analytical and integral methods for simulating HTS materials. 6th International Workshop on Numerical Modelling of High Temperature Superconductors, FCT NOVA / UNINOVA, Jun 2018, Caparica, Portugal. p. 11, id. O3.1-52. ⟨hal-01759262⟩