J. Adam, M. Klinkmueller, G. Schreurs, and B. Wieneke, Quantitative 3D strain analysis in analogue experiments simulating tectonic deformation: Integration of X-ray computed tomography and digital volume correlation techniques, Journal of Structural Geology, vol.55, pp.127-149, 2013.
DOI : 10.1016/j.jsg.2013.07.011

R. J. Adrian, Twenty years of particle image velocimetry, Experiments in Fluids, vol.10, issue.2, pp.159-169, 2005.
DOI : 10.1007/978-3-662-03637-2

E. Andò, S. Hall, G. Viggiani, J. Desrues, and P. Bésuelle, Experimental micromechanics: grain-scale observation of sand deformation, G??otechnique Letters, vol.2, issue.3, pp.107-112, 2012.
DOI : 10.1680/geolett.12.00027

A. C. Antoulas, D. C. Sorensen, and S. Gugercin, A survey of model reduction methods for large-scale systems, CONTEMPORARY MATHEMATICS, vol.280, pp.193-220, 2001.
DOI : 10.1090/conm/280/04630

S. Avril, M. Bonnet, A. S. Bretelle, M. Grédiac, F. Hild et al., Overview of Identification Methods of Mechanical Parameters Based on Full-field Measurements, Experimental Mechanics, vol.48, issue.4, pp.381-402, 2008.
DOI : 10.1007/978-1-4612-0569-2
URL : https://hal.archives-ouvertes.fr/hal-00274639

J. Banhart, A. Borbély, K. Dzieciol, F. Garcia-moreno, I. Manke et al., X-ray and neutron imaging ??? Complementary techniques for materials science and engineering, International Journal of Materials Research, vol.101, issue.9, pp.1069-1079, 2010.
DOI : 10.3139/146.110382
URL : https://hal.archives-ouvertes.fr/hal-00853832

E. Bar-kochba, J. Toyjanova, E. Andrews, K. Kim, and C. Franck, A Fast Iterative Digital Volume Correlation Algorithm for Large Deformations, Experimental Mechanics, vol.35, issue.3, pp.261-274, 2015.
DOI : 10.1007/s00348-003-0655-4

K. J. Batenburg and J. Sijbers, Dart: A Fast Heuristic Algebraic Reconstruction Algorithm for Discrete Tomography, 2007 IEEE International Conference on Image Processing, p.133, 2007.
DOI : 10.1109/ICIP.2007.4379972

K. J. Batenburg and J. Sijbers, DART: A Practical Reconstruction Algorithm for Discrete Tomography, IEEE Transactions on Image Processing, vol.20, issue.9, pp.2542-2553, 2011.
DOI : 10.1109/TIP.2011.2131661

B. K. Bay, Methods and applications of digital volume correlation, The Journal of Strain Analysis for Engineering Design, vol.93, issue.1, pp.745-760, 2008.
DOI : 10.1097/01.brs.0000250177.84168.ba

B. K. Bay, T. S. Smith, D. P. Fyhrie, and M. Saad, Digital volume correlation: Three-dimensional strain mapping using X-ray tomography, Experimental Mechanics, vol.27, issue.10???12, pp.217-226, 1999.
DOI : 10.2118/22943-PA

E. Beaurepaire, A. C. Boccara, M. Lebec, L. Blanchot, and H. , Full-field optical coherence microscopy, Optics Letters, vol.23, issue.4, pp.244-246, 1998.
DOI : 10.1364/OL.23.000244

H. Berek, U. Ballaschk, C. G. Aneziris, K. Losch, and K. Schladitz, The correlation of local deformation and stress-assisted local phase transformations in MMC foams, Materials Characterization, vol.107, pp.139-148, 2015.
DOI : 10.1016/j.matchar.2015.06.020

G. Besnard, F. Hild, and S. Roux, ???Finite-Element??? Displacement Fields Analysis from Digital Images: Application to Portevin???Le Ch??telier Bands, Experimental Mechanics, vol.404, issue.3, pp.789-803, 2006.
DOI : 10.1080/14786440808520347

T. Bormann, G. Schulz, H. Deyhle, F. Beckmann, M. De-wild et al., Combining micro computed tomography and three-dimensional registration to evaluate local strains in shape memory scaffolds, Acta Biomaterialia, vol.10, issue.2, pp.1024-1034, 2014.
DOI : 10.1016/j.actbio.2013.11.007

M. Bornert, J. Chaix, P. Doumalin, J. Dupré, T. Fournel et al., Mesure tridimensionnelle de champs cinématiques par imagerie volumique pour l'analyse des matériaux et des structures, pp.43-88, 2004.

G. Borstnar, F. Gillard, M. N. Mavrogordato, I. Sinclair, and S. M. Spearing, Three-dimensional deformation mapping of Mode I interlaminar crack extension in particle-toughened interlayers, Acta Materialia, vol.103, pp.63-70, 2016.
DOI : 10.1016/j.actamat.2015.09.059

A. Bouterf, J. Adrien, E. Maire, X. Brajer, F. Hild et al., Failure Mechanisms of Plasterboard in Nail Pull Test Determined by X-ray Microtomography and Digital Volume Correlation, Experimental Mechanics, vol.50, issue.5, pp.561427-1437, 2016.
DOI : 10.1111/str.12101
URL : https://hal.archives-ouvertes.fr/hal-01383905

A. Bouterf, J. Adrien, E. Maire, X. Brajer, F. Hild et al., Identification of the crushing behavior of brittle foam: From indentation to oedometric tests, Journal of the Mechanics and Physics of Solids, vol.98, pp.181-200, 2017.
DOI : 10.1016/j.jmps.2016.09.011

A. Bouterf, E. Maire, S. Roux, F. Hild, X. Brajer et al., Analysis of compaction in brittle foam with multiscale indentation tests, Mechanics of Materials, vol.118, 2017.
DOI : 10.1016/j.mechmat.2017.12.004
URL : https://hal.archives-ouvertes.fr/hal-01674574

A. Bouterf, S. Roux, F. Hild, J. Adrien, E. Maire et al., Digital Volume Correlation Applied to X-ray Tomography Images from Spherical Indentation Tests on Lightweight Gypsum, Strain, vol.196, issue.2, pp.444-453, 2014.
DOI : 10.1016/j.cma.2007.06.019
URL : https://hal.archives-ouvertes.fr/hal-01068402

A. I. Bowler, B. W. Drinkwater, and P. D. Wilcox, An investigation into the feasibility of internal strain measurement in solids by correlation of ultrasonic images, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.22, issue.1, pp.4672247-2270, 2011.
DOI : 10.1016/S0079-6638(08)70151-3

R. Brault, A. Germaneau, J. Dupré, P. Doumalin, S. Mistou et al., In-situ Analysis of Laminated Composite Materials by X-ray Micro-Computed Tomography and Digital Volume Correlation, Experimental Mechanics, vol.37, issue.7, pp.531143-1151, 2013.
DOI : 10.1007/BF02317423
URL : https://hal.archives-ouvertes.fr/hal-00814035

J. Buffì-ere, E. Maire, J. Adrien, J. Masse, and E. Boller, In Situ Experiments with X ray Tomography: an Attractive Tool for Experimental Mechanics, Experimental Mechanics, vol.17, issue.2, pp.289-305, 2010.
DOI : 10.1016/j.crme.2008.06.006

J. Y. Buffì-ere, E. Maire, P. Cloetens, G. Lormand, and R. Fougères, Characterization of internal damage in a MMCp using X-ray synchrotron phase contrast microtomography, Acta Materialia, vol.47, issue.5, pp.1613-1625, 1999.
DOI : 10.1016/S1359-6454(99)00024-5

A. Buljac, Understanding, observation and quantification of ductile failure mechanisms via 3D imaging, 2017.
URL : https://hal.archives-ouvertes.fr/tel-01617107

A. Buljac, M. Shakoor, J. Neggers, M. Bernacki, P. Bouchard et al., Numerical validation framework for micromechanical simulations based on synchrotron 3D imaging, Computational Mechanics, vol.45, issue.48???49, pp.59419-441, 2017.
DOI : 10.1016/j.euromechsol.2013.11.006
URL : https://hal.archives-ouvertes.fr/hal-01480980

A. Buljac, T. Taillandier-thomas, T. F. Morgeneyer, L. Helfen, S. Roux et al., Slant strained band development during flat to slant crack transition in AA 2198 T8 sheet: in situ 3D measurements, International Journal of Fracture, vol.20, issue.1, pp.49-62, 2016.
DOI : 10.1364/OE.20.000794
URL : https://hal.archives-ouvertes.fr/hal-01385406

F. Morgeneyer and . Hild, On the Feasibility of Calibration of Elastoplastic Parameters at the Microscale via X-Ray Microtomography and Digital Volume Correlation for the Simulation of Ductile Damage, 2017.

B. Cai, S. Karagadde, L. Yuan, T. J. Marrow, T. Connolley et al., In situ synchrotron tomographic quantification of granular and intragranular deformation during semi-solid compression of an equiaxed dendritic Al???Cu alloy, Acta Materialia, vol.76, pp.371-380, 2014.
DOI : 10.1016/j.actamat.2014.05.035

B. Cai, P. D. Lee, S. Karagadde, T. J. Marrow, and T. Connolley, Time-resolved synchrotron tomographic quantification of deformation during indentation of an equiaxed semi-solid granular alloy, Acta Materialia, vol.105, pp.338-346, 2016.
DOI : 10.1016/j.actamat.2015.11.028

E. J. Candès, J. Romberg, and T. Tao, Robust uncertainty principles: exact signal reconstruction from highly incomplete frequency information, IEEE Transactions on Information Theory, vol.52, issue.2, pp.489-509, 2006.
DOI : 10.1109/TIT.2005.862083

D. C. Champeney, A Handbook of Fourier Theorems Cambridge (UK), 1987. 42 An algorithm for the machine calculation of complex fourier series, MATH- EMATICS OF COMPUTATION, vol.19, issue.90, pp.297-301, 1965.

C. R. Abel and . Ethier, Effects of Peripapillary Scleral Stiffening on the Deformation of the Lamina Cribrosa, INVESTIGATIVE OPHTHALMOLOGY & VISUAL SCIENCE, vol.57, issue.6, pp.2666-2677, 2016.

C. R. Abel and . Ethier, Phase-Contrast Micro-Computed Tomography Measurements of the Intraocular Pressure-Induced Deformation of the Porcine Lamina Cribrosa, IEEE TRANSACTIONS ON MEDICAL IMAGING, vol.35, issue.4, pp.988-999, 2016.

N. Dahdah, N. Limodin, A. Bartali, J. Witz, R. Seghir et al., High-Temperature Fatigue Tests, Strain, vol.70, issue.4, pp.324-335, 2016.
DOI : 10.1016/S0013-7944(02)00097-8
URL : https://hal.archives-ouvertes.fr/hal-01419328

E. Dall-'ara, D. Barber, and M. Viceconti, About the inevitable compromise between spatial resolution and accuracy of strain measurement for bone tissue: A 3D zero-strain study, JOURNAL OF BIOMECHANICS, issue.12, pp.472956-2963, 2014.

V. Danesi, G. Tozzi, and L. Cristofolini, Application of digital volume correlation to study the efficacy of prophylactic vertebral augmentation, Clinical Biomechanics, vol.39, pp.14-24, 2016.
DOI : 10.1016/j.clinbiomech.2016.07.010

G. R. Davis and J. C. Elliot, Artefacts in X-ray microtomography of materials, Materials Science and Technology, vol.17, issue.9, pp.1011-1018, 2006.
DOI : 10.1016/j.msea.2004.09.012

J. Desrues and E. Andò, Strain localisation in granular media, Comptes Rendus Physique, vol.16, issue.1, pp.26-36, 2015.
DOI : 10.1016/j.crhy.2015.01.001
URL : https://hal.archives-ouvertes.fr/tel-00008343

J. Desrues, R. Chambon, M. Mokni, and F. Mazerolle, Void ratio evolution inside shear bands in triaxial sand specimens studied by computed tomography, G??otechnique, vol.46, issue.3, pp.529-546, 1996.
DOI : 10.1680/geot.1996.46.3.529

J. Desrues, G. Viggiani, and P. Bésuelle, Advances in X-ray Tomography for Geomaterials, 2006.
DOI : 10.1002/9780470612187

D. L. Donoho, Compressed sensing, IEEE Transactions on Information Theory, vol.52, issue.4, pp.1289-1306, 2006.
DOI : 10.1109/TIT.2006.871582
URL : https://hal.archives-ouvertes.fr/inria-00369486

D. L. Donoho, A. Maleki, and A. Montanari, The Noise-Sensitivity Phase Transition in Compressed Sensing, IEEE Transactions on Information Theory, vol.57, issue.10, pp.6920-6941, 2011.
DOI : 10.1109/TIT.2011.2165823

A. Dubois and L. Vabre, Ultrahigh-resolution OCT using white-light interference microscopy, Coherence Domain Optical Methods and Optical Coherence Tomography in Biomedicine VII, pp.14-22, 2003.
DOI : 10.1117/12.477631

D. S. Eastwood, V. Yufit, J. Gelb, A. Gu, R. S. Bradley et al., Lithiation-Induced Dilation Mapping in a Lithium-Ion Battery Electrode by 3D X-Ray Microscopy and Digital Volume Correlation, Advanced Energy Materials, vol.187, issue.447, p.1300506, 2014.
DOI : 10.1016/j.jpowsour.2008.10.075

J. A. Elliott, A. H. Windle, J. R. Hobdell, G. Eeckhaut, R. J. Oldman et al., In-situ deformation of an open-cell flexible polyurethane foam characterised by 3d computed microtomography, JOURNAL OF MATERIALS SCIENCE, issue.8, pp.371547-1555, 2002.

G. E. Elsinga, F. Scarano, B. Wieneke, and B. W. Van-oudheusden, Tomographic particle image velocimetry, Experiments in Fluids, vol.28, issue.7, pp.933-947, 2006.
DOI : 10.1007/s00348-006-0212-z

R. Fedele, A. Ciani, F. Fiori, R. Fedele, A. Ciani et al., X-ray microtomography under loading and 3D-volume digital image correlation. A review A regularized, pyramidal multi-grid approach to global 3D-volume digital image correlation based on X-ray micro-tomography, FUNDAMENTA INFORMATICAE FUNDAMENTA INFORMATICAE, vol.135, issue.125, pp.171-1973, 2013.

L. A. Feldkamp, L. C. Davis, and J. W. Kress, Practical cone-beam algorithm, Journal of the Optical Society of America A, vol.1, issue.6, pp.612-619, 1984.
DOI : 10.1364/JOSAA.1.000612
URL : http://www.engineering.uiowa.edu/~mchen/reconstruction/practical feldkamp.pdf

X. Feng, M. S. Hall, M. Wu, and C. Hui, An adaptive algorithm for tracking 3D bead displacements: application in biological experiments, Measurement Science and Technology, vol.25, issue.5, p.55701, 2014.
DOI : 10.1088/0957-0233/25/5/055701

F. Figueroa-pilz, P. J. Dowey, A. Fauchille, L. Courtois, B. Bay et al., Synchrotron tomographic quantification of strain and fracture during simulated thermal maturation of an organic-rich shale, UK Kimmeridge Clay, Journal of Geophysical Research: Solid Earth, vol.81, issue.2, pp.2553-2564, 2017.
DOI : 10.1190/geo2015-0194.1

T. Fila, O. Jirousek, A. Jung, and I. Kumpova, Identification of strain fields in pure Al and hybrid Ni/Al metal foams using X-ray micro-tomography under loading, Journal of Instrumentation, vol.11, issue.11, p.11017, 2016.
DOI : 10.1088/1748-0221/11/11/C11017

D. P. Finegan, E. Tudisco, M. Scheel, J. B. Robinson, O. O. Taiwo et al., Quantifying Bulk Electrode Strain and Material Displacement within Lithium Batteries via High-Speed Operando Tomography and Digital Volume Correlation, Advanced Science, vol.9, issue.121, p.1500332, 2016.
DOI : 10.1186/1556-276X-9-290

G. Fischer, J. Nellesen, N. B. Anar, K. Ehrig, H. Riesemeier et al., 3D analysis of micro-deformation in VHCF-loaded nodular cast iron by <mml:math altimg="si0014.gif" overflow="scroll" xmlns:xocs="http://www.elsevier.com/xml/xocs/dtd" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.elsevier.com/xml/ja/dtd" xmlns:ja="http://www.elsevier.com/xml/ja/dtd" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:tb="http://www.elsevier.com/xml/common/table/dtd" xmlns:sb="http://www.elsevier.com/xml/common/struct-bib/dtd" xmlns:ce="http://www.elsevier.com/xml/common/dtd" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:cals="http://www.elsevier.com/xml/common/cals/dtd" xmlns:sa="http://www.elsevier.com/xml/common/struct-aff/dtd"><mml:mi mathvariant="normal">??</mml:mi><mml:mi>CT</mml:mi></mml:math>, Materials Science and Engineering: A, vol.577, pp.202-209, 2013.
DOI : 10.1016/j.msea.2013.04.057

T. G. Flohr, C. H. Mccollough, H. Bruder, M. Petersilka, K. Gruber et al., First performance evaluation of a dual-source CT (DSCT) system, European Radiology, vol.216, issue.3, pp.256-268, 2006.
DOI : 10.1148/radiology.216.2.r00au19457

F. Forsberg, R. Mooser, M. Arnold, E. Hack, and P. Wyss, 3D micro-scale deformations of wood in bending: Synchrotron radiation ??CT data analyzed with digital volume correlation, Journal of Structural Biology, vol.164, issue.3, pp.255-262, 2008.
DOI : 10.1016/j.jsb.2008.08.004

F. Forsberg and C. R. Siviour, 3D deformation and strain analysis in compacted sugar using x-ray microtomography and digital volume correlation, Measurement Science and Technology, vol.20, issue.9, p.95703, 2009.
DOI : 10.1088/0957-0233/20/9/095703

F. Forsberg, M. Sjodahl, R. Mooser, E. Hack, and P. Wyss, Full Three-Dimensional Strain Measurements on Wood Exposed to Three-Point Bending: Analysis by Use of Digital Volume Correlation Applied to Synchrotron Radiation Micro-Computed Tomography Image Data, Strain, vol.41, issue.1, pp.47-60, 2010.
DOI : 10.1016/j.crme.2008.06.006

C. Franck, S. Hong, S. A. Maskarinec, D. A. Tirrell, and G. Ravichandran, Three-dimensional Full-field Measurements of Large Deformations in Soft Materials Using Confocal Microscopy and Digital Volume Correlation, Experimental Mechanics, vol.1, issue.1, pp.47427-438, 2007.
DOI : 10.1007/s11340-007-9037-9

J. Fu, M. Haghighi-abayneh, F. Pierron, and P. D. Ruiz, Depth-Resolved Full-Field Measurement of Corneal Deformation by Optical Coherence Tomography and Digital Volume Correlation, Experimental Mechanics, vol.32, issue.8, pp.1203-1217, 2016.
DOI : 10.1097/OPX.0b013e3181783a70

J. Fu, F. Pierron, and P. D. Ruiz, Elastic stiffness characterization using three-dimensional full-field deformation obtained with optical coherence tomography and digital volume correlation, Journal of Biomedical Optics, vol.18, issue.12, p.18121512, 2013.
DOI : 10.1117/1.JBO.18.12.121512

M. Gates, J. Gonzalez, J. Lambros, and M. T. Heath, Subset Refinement for Digital Volume Correlation: Numerical and Experimental Applications, Experimental Mechanics, vol.54, issue.7, pp.245-259, 2015.
DOI : 10.1016/j.csda.2009.09.020

M. Gates, M. T. Heath, and J. Lambros, High-performance hybrid CPU and GPU parallel algorithm for digital volume correlation, The International Journal of High Performance Computing Applications, vol.959970, issue.7, pp.92-106, 2015.
DOI : 10.1016/S0262-8856(03)00137-9

M. Genet, L. C. Lee, and S. Kozerke, A continuum finite strain formulation of the equilibrium gap regularizer for finite element image correlation. CSMA, p.2017
URL : https://hal.archives-ouvertes.fr/hal-01661810

A. Germaneau, P. Doumalin, and J. Dupré, 3D Strain Field Measurement by Correlation of Volume Images Using Scattered Light: Recording of Images and Choice of Marks, Strain, vol.17, issue.3, pp.207-218, 2007.
DOI : 10.1117/12.7976778
URL : https://hal.archives-ouvertes.fr/hal-00239902

A. Germaneau, F. Peyruseigt, S. Mistou, P. Doumalin, and J. Dupré, 3D mechanical analysis of aeronautical plain bearings: Validation of a finite element model from measurement of displacement fields by digital volume correlation and optical scanning tomography, Optics and Lasers in Engineering, vol.48, issue.6, pp.48676-683, 2010.
DOI : 10.1016/j.optlaseng.2010.01.010

F. Gillard, R. Boardman, M. Mavrogordato, D. Hollis, I. Sinclair et al., The application of digital volume correlation (DVC) to study the microstructural behaviour of trabecular bone during compression, Journal of the Mechanical Behavior of Biomedical Materials, vol.29, pp.480-499, 2014.
DOI : 10.1016/j.jmbbm.2013.09.014

L. A. Gomes-perini, J. Passieux, and J. Périé, A Multigrid PGD-based Algorithm for Volumetric Displacement Fields Measurements, 2014. and industrial applications, pp.355-367, 1999.
DOI : 10.1007/s00466-010-0496-y
URL : https://hal.archives-ouvertes.fr/hal-01015904

S. Gondrom, J. Zhou, M. Maisl, H. Reiter, M. Kröning et al., X-ray computed laminography: an approach of computed tomography for applications with limited access, Nuclear Engineering and Design, vol.190, issue.1-2, pp.141-147, 1999.
DOI : 10.1016/S0029-5493(98)00319-7

M. Grédiac and F. Hild, Full-Field Measurements and Identification in Solid Mechanics, p.2012
DOI : 10.1002/9781118578469

J. Guillet, B. Recur, L. Frederique, B. Bousquet, L. Canioni et al., Review of Terahertz Tomography Techniques, Journal of Infrared, Millimeter, and Terahertz Waves, vol.21, issue.4, pp.382-411, 2014.
DOI : 10.1364/OE.21.004817
URL : https://hal.archives-ouvertes.fr/hal-00968839

A. Guvenilir, T. M. Breunig, J. H. Kinney, and S. R. Stock, Direct observation of crack opening as a function of applied load in the interior of a notched tensile sample of Al???Li 2090, Acta Materialia, vol.45, issue.5, pp.1977-1987, 1997.
DOI : 10.1016/S1359-6454(96)00311-4

S. Hall, M. Bornert, J. Desrues, Y. Pannier, N. Lenoir et al., Discrete and continuum analysis of localised deformation in sand using x-ray micro ct and volumetric digital image correlation

L. Helfen, T. Baumbach, P. Mikulík, D. Kiel, P. Pernot et al., High-resolution three-dimensional imaging of flat objects by synchrotron-radiation computed laminography, Applied Physics Letters, vol.190, issue.7, p.86071915, 2005.
DOI : 10.1118/1.1350588

L. Helfen, A. Myagotin, P. Mikulík, P. Pernot, A. Voropaev et al., On the implementation of computed laminography using synchrotron radiation, Review of Scientific Instruments, vol.82, issue.6, p.82, 2011.
DOI : 10.1073/pnas.68.9.2236

L. Helfen, A. Myagotin, A. Rack, P. Pernot, P. Mikulík et al., Synchrotron-radiation computed laminography for high-resolution three-dimensional imaging of flat devices, physica status solidi (a), vol.563, issue.24, pp.2760-2765, 2007.
DOI : 10.1002/pssa.200775676

L. Helfen, F. Xu, H. Suhonen, L. Urbanelli, P. Cloetens et al., Nano-laminography for three-dimensional high-resolution imaging of flat specimens, Journal of Instrumentation, vol.8, issue.05, p.5006, 2013.
DOI : 10.1088/1748-0221/8/05/C05006
URL : https://hal.archives-ouvertes.fr/hal-01573941

G. T. Herman, Correction for beam hardening in computed tomography, Physics in Medicine and Biology, vol.24, issue.1, p.81, 1979.
DOI : 10.1088/0031-9155/24/1/008

G. T. Herman and R. Davidi, Image reconstruction from a small number of projections, Inverse Problems, vol.24, issue.4, 2008.
DOI : 10.1088/0266-5611/24/4/045011

F. Hild, A. Bouterf, and S. Roux, Damage measurements via DIC, International Journal of Fracture, vol.46, issue.3, pp.77-105, 2015.
DOI : 10.1021/ma302325w
URL : https://hal.archives-ouvertes.fr/hal-01166736

F. Hild, A. Fanget, J. Adrien, E. Maire, and S. Roux, Three-dimensional analysis of a tensile test on a propellant with digital volume correlation, ARCHIVES OF MECHANICS, vol.63, pp.5-6459, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00634714

F. Hild, H. Leclerc, S. Roux, N. Swiergiel, and Z. Tomi?evi´tomi?evi´c, Circumventing the Curse of Resolution versus Spatial Resolution in Digital Image Correlation: From Local to Global and Regularized Approaches, IUTAM symposium on Advances of Optical Methods in Experimental Mechanics, 2012.

F. Hild, E. Maire, S. Roux, and J. Witz, Three-dimensional analysis of a compression test on stone wool, Acta Materialia, vol.57, issue.11, pp.3310-3320, 2009.
DOI : 10.1016/j.actamat.2009.03.038
URL : https://hal.archives-ouvertes.fr/hal-00371354

F. Hild, B. Raka, M. Baudequin, S. Roux, and F. Cantelaube, Multi-scale displacement field measurements of compressed mineral wool samples by digital image correlation, APPLIED OPTICS, issue.32, pp.416815-6828, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00002901

F. Hild and S. Roux, Comparison of Local and Global Approaches to Digital Image Correlation, Experimental Mechanics, vol.39, issue.8, pp.1503-1519, 2012.
DOI : 10.1016/j.compositesa.2007.11.011
URL : https://hal.archives-ouvertes.fr/hal-00750756

F. Hild and S. Roux, Digital image correlation, Optical Methods for Solid Mechanics. A Full-Field Approach, pp.183-228
URL : https://hal.archives-ouvertes.fr/hal-01728998

F. Hild, S. Roux, D. Bernard, G. Hauss, and M. Rebai, On the use of 3D images and 3D displacement measurements for the analysis of damage mechanisms in concrete-like materials, pp.8-9, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01385670

D. L. Hill, P. G. Batchelor, M. Holden, and D. J. Hawkes, Medical image registration, Physics in Medicine and Biology, vol.46, issue.3, p.1, 2001.
DOI : 10.1088/0031-9155/46/3/201
URL : https://hal.archives-ouvertes.fr/inria-00615977

Z. Hu, Y. Du, H. Luo, B. Zhong, and H. Lu, Internal Deformation Measurement and Force Chain Characterization of Mason Sand under Confined Compression using Incremental Digital Volume Correlation, Experimental Mechanics, vol.38, issue.9, pp.1575-1586, 2014.
DOI : 10.1016/0165-1684(94)90060-4

Z. Hu, H. Luo, S. G. Bardenhagen, C. R. Siviour, R. W. Armstrong et al., Internal Deformation Measurement of Polymer Bonded Sugar in Compression by Digital Volume Correlation of In-situ Tomography deformation measurements of soft gels, EXPERIMENTAL MECHANICS INTERNATIONAL JOURNAL OF APPLIED MECHANICS, vol.55, issue.32, pp.289-300335, 2011.

A. I. Hussein, Z. D. Mason, and E. F. Morgan, Presence of intervertebral discs alters observed stiffness and failure mechanisms in the vertebra, Journal of Biomechanics, vol.46, issue.10, pp.461683-1688, 2013.
DOI : 10.1016/j.jbiomech.2013.04.004

A. I. Hussein and E. F. Morgan, The effect of intravertebral heterogeneity in microstructure on vertebral strength and failure patterns, Osteoporosis International, vol.78, issue.6, pp.979-989, 2013.
DOI : 10.1302/0301-620X78B6.1287

T. M. Jackman, A. M. Delmonaco, and E. F. Morgan, Accuracy of finite element analyses of CT scans in predictions of vertebral failure patterns under axial compression and anterior flexion, Journal of Biomechanics, vol.49, issue.2, pp.267-275, 2016.
DOI : 10.1016/j.jbiomech.2015.12.004

T. M. Jackman, A. I. Hussein, C. Curtiss, P. M. Fein, A. Camp et al., Quantitative, 3D Visualization of the Initiation and Progression of Vertebral Fractures Under Compression and Anterior Flexion, Journal of Bone and Mineral Research, vol.30, issue.5, pp.31777-788, 2016.
DOI : 10.1016/S8756-3282(02)00686-5

C. Jailin, A. Bouterf, M. Poncelet, and S. Roux, In situ ?? CT-scan Mechanical Tests: Fast 4D Mechanical Identification, Experimental Mechanics, vol.43, issue.9, pp.1327-1340, 2017.
DOI : 10.1016/0956-7151(95)00036-U
URL : https://hal.archives-ouvertes.fr/hal-01576727

C. Jailin, A. Buljac, A. Bouterf, M. Poncelet, F. Hild et al., Self-calibration for lab-µct using space-time regularized projection-based DVC and model reduction, MEASUREMENT SCIENCE AND TECHNOLOGY, 2017.

T. Joffre, O. Girlanda, F. Forsberg, F. Sahlen, M. Sjodahl et al., A 3D in-situ investigation of the deformation in compressive loading in the thickness direction of cellulose fiber mats, Cellulose, vol.15, issue.05, pp.2993-3001, 2015.
DOI : 10.1017/S1431927609990419

T. R. Johnson, K. Nikolaou, B. J. Wintersperger, A. W. Leber, F. Von-ziegler et al., Dual-source CT cardiac imaging: initial experience, European Radiology, vol.14, issue.7, pp.161409-1415, 2006.
DOI : 10.2214/ajr.185.2.01850533

A. C. Kak and M. Slaney, Principles of computerized tomographic imaging, 1988.

S. Klein, M. Staring, K. Murphy, M. A. Viergever, and J. P. Pluim, elastix: A Toolbox for Intensity-Based Medical Image Registration, IEEE Transactions on Medical Imaging, vol.29, issue.1, pp.196-205, 2010.
DOI : 10.1109/TMI.2009.2035616

M. Kobayashi, H. Toda, Y. Kawai, T. Ohgaki, K. Uesugi et al., High-density three-dimensional mapping of internal strain by tracking microstructural features, Acta Materialia, vol.56, issue.10, pp.562167-2181, 2008.
DOI : 10.1016/j.actamat.2007.12.058

K. Krupa and M. Bekiesi´nskabekiesi´nska-figatowska, Artifacts in magnetic resonance imaging, POLISH JOURNAL OF RADIOLOGY, vol.80, p.93, 2015.

S. Kullback, Information theory and statistics, 1959.

J. Lachambre, J. Réthoré, A. Weck, and J. Buffì-ere, Extraction of stress intensity factors for 3D small fatigue cracks using digital volume correlation and X-ray tomography, International Journal of Fatigue, vol.71, pp.3-10, 2015.
DOI : 10.1016/j.ijfatigue.2014.03.022
URL : https://hal.archives-ouvertes.fr/hal-01537225

P. Ladevèze, PGD in linear and nonlinear Computational Solid Mechanics, Separated Representations and PGD-Based Model Reduction, pp.91-152, 2014.
DOI : 10.1007/978-3-7091-1794-1_3

H. Leclerc, J. Périé, F. Hild, and S. Roux, Digital volume correlation: what are the limits to the spatial resolution?, Mechanics & Industry, vol.63, issue.6, pp.361-371, 2012.
DOI : 10.1177/0309324711409999
URL : https://hal.archives-ouvertes.fr/hal-00848721

H. Leclerc, J. Périé, S. Roux, and F. Hild, Voxel-Scale Digital Volume Correlation, Experimental Mechanics, vol.22, issue.9, pp.479-490, 2011.
DOI : 10.1179/174328406X114135
URL : https://hal.archives-ouvertes.fr/hal-00521193

H. Leclerc, S. Roux, and F. Hild, Projection Savings in CT-based Digital Volume Correlation, Experimental Mechanics, vol.47, issue.1, pp.275-287, 2015.
DOI : 10.1177/0309324712441435
URL : https://hal.archives-ouvertes.fr/hal-01166750

P. Lecomte-grosbras, J. Réthoré, N. Limodin, J. Witz, and M. Brieu, Three-Dimensional Investigation of Free-Edge Effects in Laminate Composites Using X-ray Tomography and Digital Volume Correlation, Experimental Mechanics, vol.140, issue.1-4, pp.301-311, 2015.
DOI : 10.1007/s10704-006-6631-2
URL : https://hal.archives-ouvertes.fr/hal-01205922

J. Lemaitre, A Course on Damage Mechanics, 1992.

N. Lenoir, M. Bornert, J. Desrues, P. Bésuelle, and G. Viggiani, Volumetric Digital Image Correlation Applied to X-ray Microtomography Images from Triaxial Compression Tests on Argillaceous Rock, Strain, vol.23, issue.3, pp.193-205, 2007.
DOI : 10.1520/GTJ11051J
URL : https://hal.archives-ouvertes.fr/hal-00541503

P. Leplay, J. Réthoré, S. Meille, M. Baietto, J. Adrien et al., Three-dimensional Analysis of an In Situ Double-torsion Test by X-ray Computed Tomography and Digital Volume Correlation, Experimental Mechanics, vol.414, issue.1, pp.531265-1275, 2013.
DOI : 10.1016/j.jnucmat.2011.04.058
URL : https://hal.archives-ouvertes.fr/hal-00938623

A. Lesman, J. Notbohm, D. A. Tirrel, and G. Ravichandran, Contractile forces regulate cell division in three-dimensional environments, The Journal of Cell Biology, vol.205, issue.2, pp.155-162, 2014.
DOI : 10.1038/ncb1307

K. Y. Lim, J. T. Henderson, and C. P. Neu, Cell and tissue deformation measurements: Texture correlation with third-order approximation of displacement gradients, Journal of Biomechanics, vol.46, issue.14, pp.462490-2496, 2013.
DOI : 10.1016/j.jbiomech.2013.07.035

P. Ludwik, Elemente der technologischen Mechanik, 1909.
DOI : 10.1007/978-3-662-40293-1

K. Madi, G. Tozzi, Q. H. Zhang, J. Tong, A. Cossey et al., Computation of full-field displacements in a scaffold implant using digital volume correlation and finite element analysis, Medical Engineering & Physics, vol.35, issue.9, pp.1298-1312, 2013.
DOI : 10.1016/j.medengphy.2013.02.001
URL : https://hal.archives-ouvertes.fr/hal-00947398

B. A. Mae, The revolution in Medical Imaging, 2003.

F. Maes, A. Collignon, D. Vandermeulen, G. Marchal, and P. Suetens, Multimodality image registration by maximization of mutual information, IEEE Transactions on Medical Imaging, vol.16, issue.2, pp.187-198, 1997.
DOI : 10.1109/42.563664

P. C. Mahalanobis, On the generalised distance in statistics, PROCEEDINGS OF THE NATIONAL INSTITUTE OF SCIENCES OF INDIA, pp.49-55, 1936.

J. B. Maintz and M. A. Viergever, A survey of medical image registration, Medical Image Analysis, vol.2, issue.1, pp.1-36, 1998.
DOI : 10.1016/S1361-8415(01)80026-8

E. Maire, J. Buffì-ere, L. Salvo, J. J. Blandin, W. Ludwig et al., On the Application of X-ray Microtomography in the Field of Materials Science, Advanced Engineering Materials, vol.3, issue.8, pp.539-546, 2001.
DOI : 10.1002/1527-2648(200108)3:8<539::AID-ADEM539>3.0.CO;2-6
URL : https://hal.archives-ouvertes.fr/hal-00475297

E. Maire, C. Le-bourlot, J. Adrien, A. Mortensen, and R. Mokso, 20??Hz X-ray tomography during an in situ tensile test, International Journal of Fracture, vol.101, issue.9, pp.3-12, 2016.
DOI : 10.1088/1742-6596/463/1/012025
URL : https://hal.archives-ouvertes.fr/hal-01538199

E. Maire and P. J. Withers, Quantitative X-ray tomography, International Materials Reviews, vol.42, issue.3, pp.1-43, 2014.
DOI : 10.1016/j.jnucmat.2011.03.051
URL : https://hal.archives-ouvertes.fr/hal-01538208

M. Makitalo and A. Foi, Optimal Inversion of the Generalized Anscombe Transformation for Poisson-Gaussian Noise, IEEE Transactions on Image Processing, vol.22, issue.1, pp.91-103, 2013.
DOI : 10.1109/TIP.2012.2202675

V. Malfroy-camine, H. A. Rudiger, D. P. Pioletti, and A. Terrier, Full-field measurement of micromotion around a cementless femoral stem using micro-CT imaging and radiopaque markers, Journal of Biomechanics, vol.49, issue.16, pp.494002-4008, 2016.
DOI : 10.1016/j.jbiomech.2016.10.029

T. J. Marrow, M. Mostafavi, T. Hashimoto, and G. E. Thompson, A quantitative three-dimensional in situ study of a short fatigue crack in a magnesium alloy, International Journal of Fatigue, vol.66, pp.183-193, 2014.
DOI : 10.1016/j.ijfatigue.2014.04.003

S. A. Maskarinec, C. Franck, D. A. Tirrell, and G. Ravichandran, Quantifying cellular traction forces in three dimensions, Proceedings of the National Academy of Sciences, vol.111, issue.52, pp.22108-22113, 2009.
DOI : 10.1529/biophysj.107.113670

F. Mathieu, F. Hild, and S. Roux, Identification of a crack propagation law by digital image correlation, International Journal of Fatigue, vol.36, issue.1, pp.146-154, 2012.
DOI : 10.1016/j.ijfatigue.2011.08.004
URL : https://hal.archives-ouvertes.fr/hal-00694317

F. Mathieu, H. Leclerc, F. Hild, and S. Roux, Estimation of Elastoplastic Parameters via Weighted FEMU and Integrated-DIC, Experimental Mechanics, vol.48, issue.2, pp.105-119, 2015.
DOI : 10.1177/0309324713482457
URL : https://hal.archives-ouvertes.fr/hal-01166755

S. A. Mcdonald and P. J. Withers, Combining X-ray microtomography and three-dimensional digital volume correlation to track microstructure evolution during sintering of copper powder, The Journal of Strain Analysis for Engineering Design, vol.49, issue.4, pp.257-269, 2014.
DOI : 10.1179/095066002225010209

A. Mendoza, S. Roux, J. Schneider, and E. Parra, Extraction of topological differences in woven composite materials, 7th Conference on Industrial Computed Tomography, 2017.

A. Mendoza, S. Roux, J. Schneider, E. Parra, and E. Obert, Unwrapping textile fabric, 3rd International Conference on Tomography of Materials and Structures, 2017.

E. H. Moore, On the reciprocal of the general algebraic matrix, BULLETIN AMERICAN MATHEM- MATICAL SOCIETY, vol.2, issue.26, pp.394-395, 1920.

P. Morandi, E. Brémand, P. Doumalin, A. Germaneau, and J. Dupré, New Optical Scanning Tomography using a rotating slicing for time-resolved measurements of 3D full field displacements in structures, Optics and Lasers in Engineering, vol.58, pp.85-92, 2014.
DOI : 10.1016/j.optlaseng.2014.02.007

T. F. Morgeneyer, L. Helfen, H. Mubarak, and F. Hild, 3D Digital Volume Correlation of Synchrotron Radiation Laminography Images of Ductile Crack Initiation: An Initial Feasibility Study, Experimental Mechanics, vol.51, issue.4, pp.543-556, 2013.
DOI : 10.1007/s11340-012-9603-7
URL : https://hal.archives-ouvertes.fr/hal-00848726

T. F. Morgeneyer, T. Taillandier-thomas, A. Buljac, L. Helfen, and F. Hild, On strain and damage interactions during tearing: 3D in situ measurements and simulations for a ductile alloy (AA2139-T3), Journal of the Mechanics and Physics of Solids, vol.96, pp.550-571, 2016.
DOI : 10.1016/j.jmps.2016.07.012
URL : https://hal.archives-ouvertes.fr/hal-01383922

T. F. Morgeneyer, T. Taillandier-thomas, L. Helfen, T. Baumbach, I. Sinclair et al., In situ 3-D observation of early strain localization during failure of thin Al alloy (2198) sheet, Acta Materialia, vol.69, pp.78-91, 2014.
DOI : 10.1016/j.actamat.2014.01.033
URL : https://hal.archives-ouvertes.fr/hal-00952176

F. Mortazavi, E. Ghossein, M. Levesque, and I. Villemure, High resolution measurement of internal full-field displacements and strains using global spectral digital volume correlation, Optics and Lasers in Engineering, vol.55, pp.44-52, 2014.
DOI : 10.1016/j.optlaseng.2013.10.007

M. Mostafavi, R. Bradley, D. E. Armstrong, and T. J. Marrow, Quantifying yield behaviour in metals by X-ray nanotomography, Scientific Reports, vol.22, issue.1, p.34346, 2016.
DOI : 10.1016/j.ijplas.2005.04.007

T. J. Lee and . Marrow, Yield behavior beneath hardness indentations in ductile metals, measured by three-dimensional computed X-ray tomography and digital volume correlation, ACTA MATERIALIA, vol.82, pp.468-482, 2015.

M. Mostafavi, S. A. Mcdonald, H. Cetinel, P. M. Mummery, and T. J. Marrow, Flexural strength and defect behaviour of polygranular graphite under different states of stress, Carbon, vol.59, pp.325-336, 2013.
DOI : 10.1016/j.carbon.2013.03.025

A. Nahas, M. Bauer, S. Roux, and A. C. Boccara, 3D static elastography at the micrometer scale using Full Field OCT, Biomedical Optics Express, vol.4, issue.10, pp.2138-2149, 2013.
DOI : 10.1364/BOE.4.002138
URL : https://hal.archives-ouvertes.fr/hal-01709281

J. Neggers, O. Allix, F. Hild, and S. Roux, Big Data in Experimental Mechanics and Model Order Reduction: Today???s Challenges and Tomorrow???s Opportunities, Archives of Computational Methods in Engineering, vol.50, issue.32, pp.1-22, 2017.
DOI : 10.1017/CBO9781139167970

T. T. Nguyen, J. Yvonnet, M. Bornert, and C. Chateau, Initiation and propagation of complex 3D networks of cracks in heterogeneous quasi-brittle materials: Direct comparison between in situ testing-microCT experiments and phase field simulations, Journal of the Mechanics and Physics of Solids, vol.95, pp.320-350, 2016.
DOI : 10.1016/j.jmps.2016.06.004
URL : https://hal.archives-ouvertes.fr/hal-01331213

R. A. Novelline, Squire's Fundamentals of Radiology, 2018.

M. Palanca, L. Cristofolini, E. Dall-'ara, M. Curto, F. Innocente et al., Digital volume correlation can be used to estimate local strains in natural and augmented vertebrae: An organ-level study, Journal of Biomechanics, vol.49, issue.16, pp.493882-3890, 2016.
DOI : 10.1016/j.jbiomech.2016.10.018

M. Palanca, G. Tozzi, L. Cristofolini, M. Viceconti, and E. Dall-'ara, Three-Dimensional Local Measurements of Bone Strain and Displacement: Comparison of Three Digital Volume Correlation Approaches, Journal of Biomechanical Engineering, vol.137, issue.7, p.137071006, 2015.
DOI : 10.1115/1.4030174

B. Pan, B. Wang, D. Wu, and G. Lubineau, An efficient and accurate 3D displacements tracking strategy for digital volume correlation, Optics and Lasers in Engineering, vol.58, pp.126-135, 2014.
DOI : 10.1016/j.optlaseng.2014.02.003

B. Pan, D. Wu, and Z. Wang, Internal displacement and strain measurement using digital volume correlation: a least-squares framework, Measurement Science and Technology, vol.23, issue.4, p.2012
DOI : 10.1088/0957-0233/23/4/045002

K. J. Parker, M. M. Doyley, and D. J. Rubens, Corrigendum: Imaging the elastic properties of tissue: the 20 year perspective, Physics in Medicine and Biology, vol.57, issue.16, p.513, 2011.
DOI : 10.1088/0031-9155/57/16/5359

K. J. Parker, M. M. Doyley, and D. J. Rubens, Imaging the elastic properties of tissue: the 20 year perspective, Physics in Medicine and Biology, vol.56, issue.1, p.1, 2011.
DOI : 10.1088/0031-9155/56/1/R01

K. J. Parker, M. M. Doyley, and D. J. Rubens, Corrigendum: Imaging the elastic properties of tissue: the 20 year perspective, Physics in Medicine and Biology, vol.57, issue.16, p.575359, 2012.
DOI : 10.1088/0031-9155/57/16/5359

J. Passieux and J. Périé, High resolution digital image correlation using proper generalized decomposition: PGD-DIC, International Journal for Numerical Methods in Engineering, vol.49, issue.2, pp.531-550, 2012.
DOI : 10.1007/978-1-4612-1432-8
URL : https://hal.archives-ouvertes.fr/hal-00708541

J. Passieux, J. Périé, and M. Salaün, A dual domain decomposition method for finite element digital image correlation, International Journal for Numerical Methods in Engineering, vol.56, issue.2, pp.1670-1682, 2015.
DOI : 10.1007/s00466-013-0882-3
URL : https://hal.archives-ouvertes.fr/hal-01094665

R. S. Withers and . Bradley, In Situ Laboratory-Based Transmission X-Ray Microscopy and Tomography of Material Deformation at the Nanoscale, EXPERIMENTAL MECHANICS, vol.56, issue.9, pp.1585-1597, 2016.

J. M. Paz-garcia, O. O. Taiwo, E. Tudisco, D. P. Finegan, P. R. Shearing et al., 4D analysis of the microstructural evolution of Si-based electrodes during lithiation: Time-lapse X-ray imaging and digital volume correlation, Journal of Power Sources, vol.320, pp.196-203, 2016.
DOI : 10.1016/j.jpowsour.2016.04.076

R. Penrose, On best approximate solutions of linear matrix equations. MATHEMATICAL PROCEED- INGS OF THE CAMBRIDGE PHILOSOPHICAL SOCIETY, of dual source CT. EUROPEAN JOURNAL OF RADIOLOGY, vol.52, issue.683, pp.17-19362, 1956.

F. Pierron, S. A. Mcdonald, D. Hollis, J. Fu, P. J. Withers et al., Comparison of the Mechanical Behaviour of Standard and Auxetic Foams by X-ray Computed Tomography and Digital Volume Correlation, Strain, vol.41, issue.6, pp.49467-482, 2013.
DOI : 10.1016/j.mechmat.2009.04.008

D. P. Popescu, L. Choo-smith, C. Flueraru, Y. Mao, S. Chang et al., Optical coherence tomography: fundamental principles, instrumental designs and biomedical applications, Biophysical Reviews, vol.89, issue.3, pp.155-169, 2011.
DOI : 10.1063/1.2410239
URL : http://europepmc.org/articles/pmc5418377?pdf=render

D. Prell, Y. Kyriakou, and W. A. Kalender, Comparison of ring artifact correction methods for flat-detector CT, Physics in Medicine and Biology, vol.54, issue.12, p.3881, 2009.
DOI : 10.1088/0031-9155/54/12/018

B. Rahmani, E. Ghossein, I. Villemure, and M. Levesque, In-situ mechanical properties identification of 3D particulate composites using the Virtual Fields Method, International Journal of Solids and Structures, vol.51, issue.18, pp.513076-3086, 2014.
DOI : 10.1016/j.ijsolstr.2014.05.006

J. Rannou, N. Limodin, J. Réthore, A. Gravouil, W. Ludwig et al., Three dimensional experimental and numerical multiscale analysis of a fatigue crack, Computer Methods in Applied Mechanics and Engineering, vol.199, issue.21-22, pp.199-220, 2010.
DOI : 10.1016/j.cma.2009.09.013
URL : https://hal.archives-ouvertes.fr/hal-00430486

M. Ren, J. Liang, and B. Wei, Accurate B-spline-based 3-D interpolation scheme for digital volume correlation, Review of Scientific Instruments, vol.87, issue.12, p.125114, 2016.
DOI : 10.1109/CVPR.2007.383267

J. Réthoré, F. Hild, and S. Roux, Shear-band capturing using a multiscale extended digital image correlation technique, Computer Methods in Applied Mechanics and Engineering, vol.196, issue.49-52, pp.49-525016, 2007.
DOI : 10.1016/j.cma.2007.06.019

J. Réthoré, F. Hild, and S. Roux, Extended digital image correlation with crack shape optimization, International Journal for Numerical Methods in Engineering, vol.47, issue.2, pp.248-272, 2008.
DOI : 10.1002/nme.2070

J. Réthoré, N. Limodin, J. Buffì-ere, F. Hild, W. Ludwig et al., Digital volume correlation analyses of synchrotron tomographic images, The Journal of Strain Analysis for Engineering Design, vol.24, issue.9, pp.683-695, 2011.
DOI : 10.1007/s11340-010-9333-7

J. Réthoré, S. Roux, and F. Hild, An extended and integrated digital image correlation technique applied to the analysis of fractured samples, European Journal of Computational Mechanics, vol.57, issue.15, pp.285-306, 2009.
DOI : 10.1002/nme.849

J. Réthoré, S. Roux, and F. Hild, Optimal and noise-robust extraction of Fracture Mechanics parameters from kinematic measurements, Engineering Fracture Mechanics, vol.78, issue.9, pp.1827-1845, 2011.
DOI : 10.1016/j.engfracmech.2011.01.012

J. Réthoré, J. Tinnes, S. Roux, J. Buffì, and F. Hild, Extended three-dimensional digital image correlation (X3D-DIC), Comptes Rendus M??canique, vol.336, issue.8, pp.643-649, 2008.
DOI : 10.1016/j.crme.2008.06.006

B. C. Roberts, E. Perilli, and K. J. Reynolds, Application of the digital volume correlation technique for the measurement of displacement and strain fields in bone: A literature review, Journal of Biomechanics, vol.47, issue.5, pp.923-934, 2014.
DOI : 10.1016/j.jbiomech.2014.01.001

B. A. Roeder, K. Kokini, J. P. Robinson, and S. L. Voytik-harbin, Local, Three-Dimensional Strain Measurements Within Largely Deformed Extracellular Matrix Constructs, Journal of Biomechanical Engineering, vol.30, issue.6, pp.699-708, 2004.
DOI : 10.1152/ajpcell.00169.2002

T. Rohlfing, C. R. Maurer, D. A. Bluemke, and M. A. Jacobs, Volume-preserving nonrigid registration of MR breast images using free-form deformation with an incompressibility constraint, IEEE Transactions on Medical Imaging, vol.22, issue.6, pp.730-741, 2003.
DOI : 10.1109/TMI.2003.814791

S. Roux and F. Hild, Stress intensity factor measurements from digital image correlation: post-processing and integrated approaches, International Journal of Fracture, vol.40, issue.1, pp.141-157, 2006.
DOI : 10.1117/12.7976778
URL : https://hal.archives-ouvertes.fr/hal-00013818

S. Roux, F. Hild, P. Viot, and D. Bernard, Three-dimensional image correlation from X-ray computed tomography of solid foam, Composites Part A: Applied Science and Manufacturing, vol.39, issue.8, pp.391253-1265, 2008.
DOI : 10.1016/j.compositesa.2007.11.011
URL : https://hal.archives-ouvertes.fr/hal-01006730

S. Roux, J. Réthoré, and F. Hild, Digital image correlation and fracture: an advanced technique for estimating stress intensity factors of 2D and 3D cracks, Journal of Physics D: Applied Physics, vol.42, issue.21, p.214004, 2009.
DOI : 10.1088/0022-3727/42/21/214004
URL : https://hal.archives-ouvertes.fr/hal-00381646

D. Rueckert, L. I. Sonoda, C. Hayes, D. L. Hill, M. O. Leach et al., Nonrigid registration using free-form deformations: application to breast MR images, IEEE Transactions on Medical Imaging, vol.18, issue.8, pp.18712-721, 1999.
DOI : 10.1109/42.796284

L. Salvo, P. Cloetens, E. Maire, S. Zabler, J. Blandin et al., X-ray micro-tomography an attractive characterisation technique in materials science, NUCLEAR INSTRUMENTS AND METHODS IN PHYSICS RESEARCH SECTION B: BEAM IN- TERACTIONS WITH MATERIALS AND ATOMS, pp.273-286, 2003.
DOI : 10.1016/S0168-583X(02)01689-0
URL : https://hal.archives-ouvertes.fr/hal-00475146

. Marrow, Observation and simulation of indentation damage in a SiC-SiC fibre ceramic matrix composite, FINITE ELEMENTS IN ANALYSIS AND DESIGN, vol.110, pp.11-19, 2016.

L. Saucedo-mora, C. Zou, T. Lowe, and T. J. Marrow, Three-dimensional measurement and cohesive element modelling of deformation and damage in a 2.5-dimensional woven ceramic matrix composite. FATIGUE 203. F. Scarano. Tomographic PIV: principles and practice, MEASUREMENT SCIENCE AND TECHNOL- OGY, vol.24, issue.1, p.12001, 2013.

I. J. Schoenberg, Contributions to the problem of approximation of equidistant data by analytic functions. Part A. On the problem of smoothing or graduation. A first class of analytic approximation formulae, Quarterly of Applied Mathematics, vol.4, issue.1, pp.45-99, 1946.
DOI : 10.1090/qam/15914

M. Shakoor, A. Buljac, J. Neggers, F. Hild, T. F. Morgeneyer et al., On the choice of boundary conditions for micromechanical simulations based on 3D??imaging, International Journal of Solids and Structures, vol.112, pp.83-96, 2017.
DOI : 10.1016/j.ijsolstr.2017.02.018
URL : https://hal.archives-ouvertes.fr/hal-01471645

T. S. Smith, B. K. Bay, and M. M. Rashid, Digital volume correlation including rotational degrees of freedom during minimization, Experimental Mechanics, vol.48, issue.10, pp.272-278, 2002.
DOI : 10.1117/12.7976778

S. R. Stock, Recent advances in X-ray microtomography applied to materials, International Materials Reviews, vol.75, issue.189, pp.129-181, 2008.
DOI : 10.1359/jbmr.2003.18.8.1486

C. Studholme, D. L. Hill, and D. J. Hawkes, Automated 3-D registration of MR and CT images of the head, Medical Image Analysis, vol.1, issue.2, pp.163-175, 1996.
DOI : 10.1016/S1361-8415(96)80011-9

C. Sukjamsri, D. M. Geraldes, T. Gregory, F. Ahmed, D. Hollis et al., Digital volume correlation and micro-CT: An in-vitro technique for measuring full-field interface micromotion around polyethylene implants, Journal of Biomechanics, vol.48, issue.12, pp.483447-3454, 2015.
DOI : 10.1016/j.jbiomech.2015.05.024

F. Sur and M. Grédiac, Measuring the Noise of Digital Imaging Sensors by Stacking Raw Images Affected by Vibrations and Illumination Flickering, SIAM Journal on Imaging Sciences, vol.8, issue.1, pp.611-643, 2015.
DOI : 10.1137/140977035
URL : https://hal.archives-ouvertes.fr/hal-01133358

M. A. Sutton, J. J. Orteu, and H. Schreier, Image correlation for shape, motion and deformation measurements: Basic Concepts, Theory and Applications, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01729219

T. Taillandier-thomas, S. Roux, and F. Hild, Soft Route to 4D Tomography, Physical Review Letters, vol.4, issue.2, p.25501, 2016.
DOI : 10.1051/meca/2012025

T. Taillandier-thomas, S. Roux, T. F. Morgeneyer, and F. Hild, Localized strain field measurement on laminography data with mechanical regularization, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol.324, pp.70-79, 2014.
DOI : 10.1016/j.nimb.2013.09.033
URL : https://hal.archives-ouvertes.fr/hal-00956440

A. N. Tikhonov and V. Y. Arsenin, Solutions of ill-posed problems, 1977.

H. Toda, E. Maire, Y. Aoki, and M. Kobayashi, Three-dimensional strain mapping using in situ X-ray synchrotron microtomography, The Journal of Strain Analysis for Engineering Design, vol.88, issue.10, pp.549-561, 2011.
DOI : 10.1016/j.actamat.2009.05.005
URL : https://hal.archives-ouvertes.fr/hal-01538234

H. Toda, I. Sinclair, J. Buffì-ere, E. Maire, K. H. Khor et al., A 3D measurement procedure for internal local crack driving forces via synchrotron X-ray microtomography, Acta Materialia, vol.52, issue.5, pp.1305-1317, 2004.
DOI : 10.1016/j.actamat.2003.11.014
URL : https://hal.archives-ouvertes.fr/hal-00474485

Z. Tomi?evi´tomi?evi´c, F. Hild, and S. Roux, Mechanics-aided digital image correlation, The Journal of Strain Analysis for Engineering Design, vol.48, issue.5, pp.330-343, 2013.
DOI : 10.1007/978-3-642-01811-4_15

Z. Tomi?evi´tomi?evi´c, J. Kodvanj, and F. Hild, Characterization of the nonlinear behavior of nodular graphite cast??iron via inverse identification???Analysis of uniaxial tests, European Journal of Mechanics - A/Solids, vol.59, pp.140-154, 2016.
DOI : 10.1016/j.euromechsol.2016.02.010

G. Tozzi, V. Danesi, M. Palanca, and L. Cristofolini, Elastic Full-Field Strain Analysis and Microdamage Progression in the Vertebral Body from Digital Volume Correlation, Strain, vol.23, issue.Suppl 5, pp.446-455, 2016.
DOI : 10.1016/j.clinbiomech.2007.08.024

G. Tozzi, Q. Zhang, and J. Tong, Microdamage assessment of bone-cement interfaces under monotonic and cyclic compression, Journal of Biomechanics, vol.47, issue.14, pp.473466-3474, 2014.
DOI : 10.1016/j.jbiomech.2014.09.012

H. Tran, P. Doumalin, C. Delisée, J. Dupré, J. Malvestio et al., 3D mechanical analysis of low-density wood-based fiberboards by X-ray microcomputed tomography and Digital Volume Correlation, Journal of Materials Science, vol.43, issue.3, pp.483198-3212, 2013.
DOI : 10.1111/j.1475-1305.2007.00340.x

C. Truesdell and W. Noll, The Non-Linear Field Theories of Mechanics, volume III, 1965.

E. Tudisco, S. A. Hall, E. M. Charalampidou, N. Kardjilov, A. Hilger et al., Full-field Measurements of Strain Localisation in Sandstone by Neutron Tomography and 3D-Volumetric Digital Image Correlation, Physics Procedia, vol.69, pp.509-515, 2015.
DOI : 10.1016/j.phpro.2015.07.072

E. Tudisco, C. Jailin, A. Mendoza, A. Tengattini, E. Andò et al., An extension of digital volume correlation for multimodality image registration, Measurement Science and Technology, vol.28, issue.9, p.95401, 2017.
DOI : 10.1088/1361-6501/aa7b48
URL : https://hal.archives-ouvertes.fr/hal-01633737

I. Vajda, Theory of statistical inference and information, 1989.

A. The and . Toolbox, A platform for advanced algorithm development in electron tomography, ULTRA- MICROSCOPY, vol.157, pp.35-47, 2015.

P. A. Van-den-elsen, E. J. Pol, and M. A. Viergever, Medical image matching-a review with classification, IEEE Engineering in Medicine and Biology Magazine, vol.12, issue.1, pp.26-39, 1993.
DOI : 10.1109/51.195938

G. Van-gompel, K. Van-slambrouck, M. Defrise, K. J. Batenburg, J. De-mey et al., Iterative correction of beam hardening artifacts in CT, Medical Physics, vol.43, issue.S1, pp.36-49, 2011.
DOI : 10.1109/42.370409

M. Zhu, Q. Zhang, C. Lupton, and J. Tong, Spatial resolution and measurement uncertainty of strains in bone and bone???cement interface using digital volume correlation, Journal of the Mechanical Behavior of Biomedical Materials, vol.57, pp.269-279, 2016.
DOI : 10.1016/j.jmbbm.2015.12.017

X. Zhuge, W. J. Palenstijn, and K. J. Batenburg, TVR-DART: A More Robust Algorithm for Discrete Tomography From Limited Projection Data With Automated Gray Value Estimation, IEEE Transactions on Image Processing, vol.25, issue.1, pp.455-468, 2016.
DOI : 10.1109/TIP.2015.2504869

B. Zitová and J. Flusser, Image registration methods: a survey, Image and Vision Computing, vol.21, issue.11, pp.977-1000, 2003.
DOI : 10.1016/S0262-8856(03)00137-9