Coincidence of strain-induced TRIP and propagative PLC bands in Medium Mn steels

Abstract : An Fe-0.2C-5Mn-2.5Al medium manganese steel is studied for three different intercritical annealing temperatures T1A to observe the effects of variations of retained austenite stability on the mechanical work hardening in uniaxial tension. Digital image correlation (DIC) showed that both Lüders bands and type A Portevin-le-Châtelier (PLC) bands occurred in samples with a lower T1A , but both disappeared when T1A was increased. In-situ measurements of sample magnetization with a correction for stress effects on the magnetic properties of the sample allowed for continuous measurement of the retained austenite volume fraction. This method provided a complete characterization of the kinetics of transformation-induced plasticity (TRIP) in the sample over the course of tensile testing. It is shown that the martensite transformation was purely strain-induced and coincided with the passage of both Lüders and PLC bands. An Olson-Cohen model was applied to magnetic data to attempt to explain the differences in TRIP kinetics with varying T1A.
Liste complète des métadonnées

Littérature citée [14 références]  Voir  Masquer  Télécharger
Contributeur : Olivier Hubert <>
Soumis le : jeudi 21 septembre 2017 - 20:51:51
Dernière modification le : mercredi 13 février 2019 - 17:20:10


Fichiers produits par l'(les) auteur(s)



Michael Callahan, Olivier Hubert, François Hild, Astrid Perlade, Jean-Hubert Schmitt. Coincidence of strain-induced TRIP and propagative PLC bands in Medium Mn steels. Materials Science and Engineering: A, Elsevier, 2017, 704, pp.391 - 400. 〈10.1016/j.msea.2017.08.042〉. 〈hal-01591751〉



Consultations de la notice


Téléchargements de fichiers