Room-temperature ductility of Ti-6Al-4V alloy with alpha ` martensite microstructure
Résumé
The microstructures, cold-rolling abilities, and mechanical properties of a Ti-6Al-4V alloy with a alpha' microstructure were examined, and compared with these properties in alloys with the (alpha+beta) microstructure. The microstructure of a Ti-6Al-4V alloy solution treated at 1373 K followed by quenching (referred to as 1373 K STQ in the following) exhibits the acicular alpha' martensite microstructure. The alloy exhibits the (equilibrium alpha+alpha' martensite) bimodal microstructure when 1223 K solution treatment is carried out followed by quenching (referred to as 1223 K STQ). In contrast, Ti-6Al-4V alloys heat treated at 1373 K or 1223 K, followed by furnace cooling (referred to as 1373 K ST-FC and 1223 K ST-FC), exhibit a lamellar (alpha+beta) microstructure and an equiaxed (alpha+beta) microstructure, respectively. The strength of the STQ specimens was found to be higher than that of the ST-FC specimens. The 1223 K STQ specimen had excellent cold-rolling ability (more than 40% reduction) and higher tensile ductility than those of the ST-FC specimens. The excellent ductility of 1223 K STQ is thought to be due to the constituent phase of the single HCP phase (alpha' and alpha) and the fine equiaxed bimodal morphology. The compositional distribution of the V content enrichment and the decrease in the Al content in the alpha' martensitic region during solution treatment at 1223 K should contribute to the excellent ductility. This work therefore suggests a useful method for improving room-temperature ductility by using industrial Ti-6Al-4V alloys with the alpha' martensite microstructure. (C) 2010 Elsevier B.V. All rights reserved.