FSI investigation on stability of downwind sails with an automatic dynamic trimming

Mathieu Durand (1) , Alban Leroyer (2) , Corentin Lothodé (1) , Frédéric Hauville (3) , Michel Visonneau (2) , Ronan Floch (4) , Laurent Guillaume

1 K-Epsilon
2 LHEEA - Laboratoire de recherche en Hydrodynamique, Énergétique et Environnement Atmosphérique
3 IRENAV - Institut de Recherche de l'Ecole Navale
4 Incidence-sails Brest - Incidence Sails

Gennakers are lightweight and flexible sails, used for downwind sailing configurations. Qualities sought for this kind of sail are propulsive force and dynamic stability. To simulate accurately the flow surrounding a sail, several problems need to be solved. Firstly, the structural code has to take into account cloth behavior, orientation and reinforcements. Moreover, wrinkles need to be taken into account through modeling or fine enough discretization. Secondly, the fluid solver needs to reproduce the atmospheric boundary layer as an input boundary condition, and be able to simulate separation. Thirdly, the fluid-structure interaction (FSI) is strongly coupled due to the lightness and the flexibility of the structure. The added mass is three orders of magnitude greater than the mass of the sail, and large structural displacement occur, which makes the coupling between the two solvers difficult to achieve. Finally, the problem is unsteady, and dynamic trimming is important to the simulation of gennakers (Graf and Renzsch, 2006). As the FSI procedure is detailed in Durand (2012), the present work is rather focused on its application to downwind sail stability. The main objective of this paper is to use numerical simulations to model gennakers, in order to predict both propulsive force and sail dynamic stability. Recent developments from Durand (2012) are used to solve these problems mentioned earlier, using a finite element structural analysis program dedicated to sails and rig simulations coupled with an unsteady Reynolds averaged Navier–Stokes equations (URANSE) solver. The FSI coupling is done through a partitioned approach with quasi-monolithic properties. An arbitrary Lagrangian Eulerian (ALE) formulation is used, hence the fluid mesh follows the structural deformation while keeping the same topology. The fluid mesh deformation is carried out with a fast, robust and parallelized method based on the propagation of the deformation state of the sail boundary fluid faces (Durand et al., 2010). Tests were realized on a complete production chain: a sail designer from Incidences-Sails has designed two different shapes of an IMOCA60 gennaker with the SailPack software. An automatic procedure was developed to transfer data from Sailpack to a structure input file taking into account the orientation of sailcloth and reinforcements. The same automatic procedure is used for both gennakers, in order to compare dynamic stability and propulsion forces. A new method is then developed to quantify the practical stability of a downwind sail.

Mots clés: Fluid-structure interaction; Quasi-monolithic; Sails; Trimming; dynamic; ALE

Domaines: Mécanique des fluides [physics.class-ph]; Mécanique des structures [physics.class-ph]

Mathieu Durand, Alban Leroyer, Corentin Lothodé, Frédéric Hauville, Michel Visonneau, et al.. FSI investigation on stability of downwind sails with an automatic dynamic trimming. Ocean Engineering, 2014, Innovation in High Performance Sailing Yachts - INNOVSAIL, 90, pp.129-139. ⟨10.1016/j.oceaneng.2014.09.021⟩. ⟨hal-01155431⟩