Mid-infrared absorption properties of green wood

Anna Dupleix (1) , Domingos de Sousa Meneses (2) , Mark Hughes (3) , Rémy Marchal (1, 4)

1 LABOMAP - Laboratoire Bourguignon des Matériaux et Procédés
2 CEMHTI - Conditions Extrêmes et Matériaux : Haute Température et Irradiation
3 Department of Forest Products Technology
4 IFPEN - IFP Energies nouvelles

There is a lack of quantitative data on the penetration depth and the amount of energy absorbed by green wood under infrared (IR) radiation. This lack of knowledge is a potential barrier to the development of IR heating as an alternative to soaking as a means of warming logs prior to peeling in the manufacture of plywood. Experimental measurements of normal hemispherical spectral reflectance and transmittance over the range 550-5,500 cm-1 wavenumbers on four wood species, beech, birch, Douglas-fir and spruce have brought new knowledge on mid-infrared absorption properties of green wood and removed some uncertainties. For instance, it is not possible to deliver energy deeper than up to 0.3 mm below the wood surface because 70-90 % of all incident IR radiation on the wood surface is absorbed in this layer. Some wood features, such as surface quality, the presence of knots and of free water in wood (the latter two having a more significant effect) influence the amount of energy absorbed. These results illustrate that IR radiation can heat the surface layers, but then heat penetrates deeper into the inside layers of wood by conduction.

Mots clés: emissivity; green wood heating; infrared radiation; optical properties; reflectivity; transmittivity

Domaines: Matériaux; Optique / photonique

Anna Dupleix, Domingos de Sousa Meneses, Mark Hughes, Rémy Marchal. Mid-infrared absorption properties of green wood. Mid-infrared absorption properties of green wood, 2013, pp.1-13. ⟨hal-00844551⟩