 |
Journal articles
Shot-Peening of Pre-Oxidized Plates of Zirconium: Influence of Residual Stress on Oxidation
Abstract : The present study deals with oxidation behavior under residual stress of shot-peened plates of ''commercially pure'' zirconium exposed for 30 min at 650 C. The influence of the shot-peening on a pre-oxidized material is presented. The results have been used to determine the influences of these chemical (preoxidation) and mechanical (shot-peening) treatments on the high temperature oxidation of zirconium. The oxygen profile was revealed using micro-hardness techniques and confirmed by SEM-EDS techniques. After pre-oxidation the samples were first resurfaced then shot-peened in order to introduce residual stress. A significant increase of the hardness of about 400 HV was observed on pre-oxidized shot-peened samples. Thermogravimetric analysis for 30 min at 650 C under 200 mbar O2 showed a significantly slower oxidation rate for shot-peened samples. A comparison with our computations points out the role of the residual stresses on the diffusion and, consequently, on the oxidation.
Cited literature [10 references]
https://hal.archives-ouvertes.fr/hal-00771509
Contributor : Virgil Optasanu <>
Submitted on : Wednesday, January 9, 2013 - 5:10:14 PM
Last modification on : Wednesday, May 20, 2020 - 9:26:04 AM
Long-term archiving on: : Wednesday, April 10, 2013 - 3:55:50 AM
Contributor : Virgil Optasanu <>
Submitted on : Wednesday, January 9, 2013 - 5:10:14 PM
Last modification on : Wednesday, May 20, 2020 - 9:26:04 AM
Long-term archiving on: : Wednesday, April 10, 2013 - 3:55:50 AM
Files
pre-print_Oxid_of_Metals_Racea...
Files produced by the author(s)