, Modelisation des pertes de puissance dans les tranmissions par courroie poly-V: influence des parametres de conception, Journees Transmissions Mecaniques (JTM), pp.11-12, 2016.

, Dynamics of poly-V belts: power loss analysis, Journees Jeunes Chercheurs en vibrations, Acoustique et Bruit (JJCAB), pp.16-17, 2017.

P. R. Chongqing and . China, Modeling of power losses in Poly-V belt transmissions: influence of design parameters, proceedings of the International Conference on Power Transmissions, pp.27-30, 2016.

, Modeling of power losses in poly-v belt transmissions: hysteresis phenomena, proceedings of the JSME International Conference on Motion and Power Transmissions 2017 (MPT 2017), 2017.

, Distribution of power losses in serpentine belt-drive: application to FEAD, proceedings of the International Gear Conference (IGC), pp.27-29, 2018.

, Dynamics of torsional vibration damper pulley: implementation of elastomeric constitutive law, proceedings of the International Conference on Noise and Vibration Engineering, pp.17-19, 2018.

C. A. Silva, L. Manin, R. G. Rinaldi, D. Remond, E. Besnier et al., Modeling of power losses in poly-v belt transmissions: hysteresis phenomena, vol.11, pp.1-15, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01802279

C. A. Silva, L. Manin, R. G. Rinaldi, D. Remond, E. Besnier et al., Modeling of power losses in poly-v belt transmissions: hysteresis phenomena, vol.121, pp.373-397, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01802279

C. A. Silva, M. A. Andrianoely, L. Manin, S. Ayasamy, C. Santini et al., Optimization of power losses in poly-v belt transmissions via genetic algorithm and dynamic programming, Under review, vol.128, pp.169-190, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01969509

C. A. Silva, L. Manin, M. A. Andrianoely, E. Besnier, and D. Remond, Power losses distribution in serpentine belt-drive: modelling and experiments, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01995828

C. A. Silva, L. Manin, R. G. Rinaldi, E. Besnier, M. A. Andrianoely et al., Dynamics of Torsional Vibration Damper (TVD) pulley: account for the elastomeric yet dissipative behavior, simulations and experiments, 2018.

. Belt and . .. Damping, 135 6.2.1 1st method: global friction coefficient

. .. Tensioner-characterization,

. Torsional and . .. Vibration-damper, 144 6.4.2 Implementation of elastomeric constitutive law

. Summary and . .. Conclusions, , p.155

, Chapitre 6. Caractérisations et recherche additionnelle, p.180

. .. , Chapitre 7. Conclusions et futurs travaux, vol.186, p.161

L. E. Hawker, A vibration analysis of automotive serpentine accessory drive systems, 1991.

S. Hwang, N. Perkins, A. Ulsoy, and R. Meckstroth, Rotational response and slip prediction of serpentine belt drive systems, Journal of Vibration and Acoustics, vol.116, pp.71-78, 1994.

T. Kraver, G. Fan, and J. Shah, Complex modal analysis of a flat belt pulley system with belt damping and coulomb-damped tensioner, Journal of Mechanical Design, vol.118, pp.306-311, 1996.

R. Beikmann, N. Perkins, and A. Ulsoy, Design and analysis of automotive serpentine belt drive systems for steady state performance, Journal of Mechanical Design, vol.119, pp.162-168, 1997.

R. S. Beikmann, Static and dynamic behavior of serpentine belt drive systems: theory and experiment, 1992.

R. Beikmann, N. Perkins, and A. Ulsoy, Free vibration of serpentine belt drive systems, ASME J. Vib. Acoust, vol.118, pp.406-413, 1996.

R. Parker, Efficient eigensolution, dynamic response, and eigensensitivity of serpentine drive belts, Journal of Sound and Vibration, vol.270, pp.15-38, 2004.

S. Chowdhury and R. K. Yedavalli, Dynamics of belt-pulley-shaft systems, Mech. Mach. Theory, vol.98, pp.199-215, 2016.

Y. Pan, X. Liu, Y. Shan, and G. Chen, Complex modal analysis of serpentine belt drives based on beam coupling model, Mech. Mach. Theory, vol.116, pp.162-177, 2017.

N. Srivastava and I. Haque, A review on belt and chain continuously variable transmissions (cvt): Dynamics and control, Mech. Mach. Theory, vol.44, issue.1, pp.19-41, 2009.

V. A. Lubarda, Determination of the belt force before the gross slip, Mech. Mach. Theory, vol.83, pp.31-37, 2015.

S. Amijima, Some basic problems about the belts, The science and engineering review of, Dashisha of University, vol.3, issue.3-4, pp.13-21, 1962.

S. Amijima, Some problems associated with the friction between belt and pulley, The science and engineering review of, Dashisha of University, vol.3, pp.9-21, 1962.

G. Gerbert, Traction Belt Mechanics, 1999.

T. H. Childs and D. Cowburn, Power transmission losses in v-belt drives. part 2: effects of small pulley radii, Proc Institution of Mechanical Engineers, vol.201, pp.41-53, 1987.

I. M. Ward and D. W. Hadley, An introduction to the mechanical properties of solid polymers, 1993.

T. Chen, D. Lee, and C. Sung, An experimental study on transmission efficiency of a rubber v-belt cvt, Mech. Mach. Theory, vol.33, issue.4, pp.49-58, 1998.

A. D. Almeida and S. Greenberg, Technology assessment: energy-efficient belt transmissions, Energy and Buildings, vol.22, issue.3, p.926, 1995.

L. Manin, G. Michon, D. Remond, and R. Dufour, From transmission error measurement to pulley belt slip determination in serpentine belt drives: Influence of tensioner and belt characteristics, Mech. Mach. Theory, vol.44, pp.813-821, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00506311

G. Cepon, L. Manin, and M. Boltezar, Experimental identification of the contact parameters between a v-ribbed belt and a pulley, Mech. Mach. Theory, vol.45, issue.10, pp.1424-1433, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00515886

B. Balta, F. O. Sonmez, and A. Cengiz, Speed losses in v-ribbed belt drives, Mech. Mach. Theory, vol.86, pp.1-14, 2015.

B. Balta, F. O. Sonmez, and A. Cengiz, Experimental identification of the torque losses in v-ribbed belt drives using the response surface method, J Automobile Engineering, vol.229, pp.1070-1082, 2014.

L. Manin, X. Liang, and C. Lorenzon, Power losses prediction in poly-v belt transmissions: application to front engine accessory drives, International Gear Conference, pp.1162-1171, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01075965

H. Zhu, Y. Hu, and W. Zhu, Dynamic response of a front end accessory drive system and parameter optimization for vibration reduction via genetic algorithm, J. Vib. Control, vol.24, pp.2201-2220, 2016.

J. Zhang and J. W. Zu, Non-linear vibrations of viscoelastic moving belts, Journal of Sound and Vibration, vol.216, pp.93-105, 1998.

H. Ding and L. Q. Chen, Nonlinear models for transverse forced vibration of axially moving viscoelastic beams, Shock and Vibration, vol.18, pp.281-287, 2011.

L. Q. Chen and H. Ding, Steady-state transverse response in coupled planar vibration of axially moving viscoelastic beams, ASME, vol.132, pp.1-9, 2010.

K. Marynowski, Non-linear dynamic analysis of an axially moving viscoelastic beam, J. Theor. Appl. Mech, vol.40, pp.465-482, 2002.

K. Marynowski and T. Kapitaniak, Zener internal damping in modelling of axially moving viscoelastic beam with time-dependent tension, J. Non-Linear Mech, vol.42, pp.118-131, 2007.

L. Manin and G. Michon, Entrainements par courroie striees: Architecture et dynamique globale, Techniques de l'Ingenieur, vol.1, pp.1-16, 2010.

H. Stief, R. Pflug, T. Schmidt, and C. Fechler, Belt drive systems, Schaeffler SYMPOSIUM, 2010.

L. Manin, R. Dufour, and S. Schultz, Pulley torsional vibration damper characterization, Mechanics and Industry, vol.14, pp.151-155, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00841391

G. Michon, L. Manin, and R. Dufour, Hysteretic behavior of a belt tensioner: modeling and experimental investigation, Journal of Vibration and Control, vol.11, pp.1147-1158, 2005.

C. Monternot, Comportement dynamique des transmissions de puissance par courroie dentee, 1998.

F. Grashof and T. Maschinenlehre, , p.1883

L. Euler, Remarque sur l'effet du frottement dans l'equilibre, pp.265-278, 1762.

R. S. Lakes, Viscoelastic Materials, 2009.

J. Meaud, T. Sain, G. M. Hulbert, and A. M. Waas, Analysis and optimal design of layered composites with high stiffness and high damping, Journal of Solids and Structures, vol.50, issue.9, pp.1342-1353, 2013.

P. Butaud, Contribution a l utilisation des polymeres a memoire de forme pour les structures a amortissement controle, 2015.
URL : https://hal.archives-ouvertes.fr/tel-01358598

M. Chawla, Mechanical Behavior of Materials, 1999.

G. Gerbert, On flat belt slip, Vehicle tribology, vol.18, pp.70149-70153, 1991.

C. R. Barker, L. R. Oliver, and W. F. Breig, Dynamic analysis of belt drive tension forces during rapid engine acceleration, in: SAE Technical Paper, 1991.

T. H. Childs and J. K. Parker, Power transmission by flat, v and timing belts, Tribological design of machine elements Tribology series, vol.14, pp.133-142, 1989.

R. Bellman, Dynamic programming, 1957.

E. F. Moore, The shortest path through a maze, 1959.

M. Sniedovich, Dynamic Programming: Foundations and Principles, 2010.

M. A. Andrianoely, Analyse structurale par les donnees en vue de l optimisation d une unite de production de zinc, 1984.

D. Kim, H. Peng, S. Bai, and J. Maguire, Control of integrated powertrain with electronic throttle and automatic transmission, IEEE transactions on control systems technology, vol.15, pp.474-482, 2007.

H. Luu, L. Nouveliere, and S. Mammar, Dynamic programming for fuel consumption optimization on light vehicle, IFAC Symposium advances in automotive control 43, pp.372-377, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00620484

R. W. Anderson, M. Conrad, and H. J. , bremermann: a pioneer in mathematical biology, Bio Systems, vol.34, 1995.

A. L. Chua, N. A. Benedek, L. Chen, M. W. Finnis, and A. P. Sutton, A genetic algorithm for predicting the structures of interfaces in multicomponent systems, Nature Materials, vol.9, pp.418-422, 2010.

S. Sasaki, A. J. Comber, H. Suzuki, and C. Brunsdon, Using genetic algorithms to optimize current and future health planning -the example of ambulance locations, International Journal of Health Geographics, vol.9, p.4, 2010.

C. Darwin, On the Origin of Species, p.1859

K. J. Binkley and M. Hagiwara, Applying self-adaptive evolutionary algorithms to twodimensional packing problems using a four corners heuristic, European Journal of Operational Research, vol.183, pp.1230-1248, 2007.

A. J. Umbarkar and P. D. Sheth, Crossover operators in genetic algorithms: a review, Journal on Soft computing, vol.6, pp.1083-1092, 2015.

T. D. Gwiazda, Genetic Algorithms Reference, 2006.

V. Krishnamurthy, Partially Observed Markov Decision Processes: from filtering to controlled sensing, 2016.

C. A. Silva, M. A. Andrianoely, L. Manin, S. Ayasamy, C. Santini et al., Optimization of power losses in poly-v belt transmissions via genetic algorithm and dynamic programming, Mech. Mach. Theory, vol.128, pp.169-190, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01969509

S. Braun, D. Ewins, and S. S. Rao, Encyclopedia of vibration, 2001.

M. Lalanne, P. Berthier, and J. D. Hagopian, Mechanical Vibrations for ENGINEERS, 1984.
URL : https://hal.archives-ouvertes.fr/cel-00315803

K. T. Amijima and I. Fuji, Study on v-ribbed belt: the relation between rib deformation and transmitted force of the v-ribbed belt, JSME, vol.29, pp.2317-2322, 1986.

D. Tonazzi, Macroscopic frictional contact dynamics, 2014.
URL : https://hal.archives-ouvertes.fr/tel-01149051

J. Abdo and M. Tahat, The effect of frequency and amplitude of vibration on the coefficient of friction for metals, WSEAS Transactions on applied and theoretical mechanics, vol.3, pp.265-274, 2008.

X. Li-;-insa-lyon, The experimental characterization of the belt tensioner in order to modify its model in cae tool, 2016.

H. Blanc, Dynamique des rotors en torsion : Etude des amortisseurs de torsion, Techniques de l'Ingenieur BM5124 V1, pp.1-9, 2000.

J. C. Jauregui, J. A. Becerril, and A. L. Guzman, Viscoelastic torsional damper model, Power Transmission and Gearing Conference, vol.88, pp.777-780, 1996.

J. M. Kelly, Moving load problems in the theory of viscoelasticity, 1962.

K. Wakabayashi, Y. Honda, T. Kodama, and K. Shimoyamada, Torsional vibration damping of diesel engine with rubber damper pulley, JSME, vol.38, pp.670-678, 1995.

M. Kinoshita and T. Sakamoto, An experimental study of a torsional/bending damper pulley for an engine crankshaft, Society of Automotive Engineers, pp.1605-1615, 1989.

R. N. Jazar, Advanced Vibrations A Modern Approach, 2013.

A. G. Piersol and T. L. Paez, Harris Shock and Vibration Handbook, 2010.

M. Thomas and F. Laville, Simulation des vibrations mecaniques, 2007.

S. Cantournet, R. Desmorat, and J. Besson, Mullins effect and cyclic stress softening of filled elastomers by internal sliding and friction thermodynamics model, International Journal of Solids and Structures, vol.46, pp.2255-2264, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00379072

P. Saad, Modelisation et identification du comportement non lineaire des cales en caoutchouc, 2003.

M. Schulz, Elastic creep in serpentine belt drives and adopting a suitable strain measure, Mechanical Engineering Science, vol.218, pp.1421-1433, 2004.