A Three-Stage Mechanistic Model for Solidification Cracking During Welding of Steel

L. Aucott , D. Huang (1) , H. B. Dong (2) , S. W. Wen (2) , J. Marsden , A. Rack (3) , A. C. F. Cocks (1)

1 Department of Engineering Science
2 Department of Engineering [Leicester]
3 ESRF - European Synchrotron Radiation Facility

A three-stage mechanistic model for solidification cracking during TIG welding of steel is proposed from in situ synchrotron X-ray imaging of solidification cracking and subsequent analysis of fracture surfaces. Stage 1-Nucleation of inter-granular hot cracks: cracks nucleate inter-granularly in sub-surface where maximum volumetric strain is localized and volume fraction of liquid is less than 0.1; the crack nuclei occur at solute-enriched liquid pockets which remain trapped in increasingly impermeable semi-solid skeleton. Stage 2-Coalescence of cracks via inter-granular fracture: as the applied strain increases, cracks coalesce through inter-granular fracture; the coalescence path is preferential to the direction of the heat source and propagates through the grain boundaries to solidifying dendrites. Stage 3-Propagation through inter-dendritic hot tearing: inter-dendritic hot tearing occurs along the boundaries between solidifying columnar dendrites with higher liquid fraction. It is recommended that future solidification cracking criterion shall be based on the application of multiphase mechanics and fracture mechanics to the failure of semi-solid materials. (C) The Minerals, Metals & Materials Society and ASM International 2018

Keywords: FE-RICH INTERMETALLICS; HOT-TEARING CRITERION; ALUMINUM-ALLOYS; CONSTITUTIVE BEHAVIOR; CU ALLOYS; DEFORMATION; QUANTIFICATION; INITIATION; GROWTH; DAMAGE

Domains: Physics [physics]

L. Aucott, D. Huang, H. B. Dong, S. W. Wen, J. Marsden, et al.. A Three-Stage Mechanistic Model for Solidification Cracking During Welding of Steel. Metallurgical and Materials Transactions A, 2018, 49A (5), pp.1674-1682. ⟨10.1007/s11661-018-4529-z⟩. ⟨hal-02976212⟩