Skip to Main content Skip to Navigation
Journal articles

Shear Test on CFRP Full-Field Measurement and Finite Element Analysis

Abstract : The purpose of this work is to study the Iosipescu shear test and more precisely its ability to characterize the shear modulus of a carbone/epoxy composite material. The parameters influencing this identification are the fibre orientation, the geometry of the notch and the boundary conditions. Initially these parameters were studied through the finite element analysis of the shear test. Then, the measurement of the shear strains was carried out by traditional methods of measurement (strain gauges) but also by optical methods. These optical methods: the digital image correlation and the electronic speckle pattern interferometry (ESPI); allow for various levels of loading, to reach a full-field measurement of the shear strain. This enabled us to study the strain distribution on the section between the two notches. The finite element model enabled us to study the parameters influencing the calculation of the shear modulus in comparison with strain gauges, image correlation and ESPI. This work makes it possible to conclude on optimal parameters for the Iosipescu test.
Complete list of metadata

https://hal.archives-ouvertes.fr/hal-00815748
Contributor : Open Archive Toulouse Archive Ouverte (oatao) Connect in order to contact the contributor
Submitted on : Friday, April 19, 2013 - 12:20:31 PM
Last modification on : Sunday, April 21, 2013 - 8:59:24 AM
Long-term archiving on: : Saturday, July 20, 2013 - 4:02:11 AM

File

Mistou_8925.pdf
Files produced by the author(s)

Identifiers

Citation

Sebastien Mistou, Marina Fazzini, Moussa Karama. Shear Test on CFRP Full-Field Measurement and Finite Element Analysis. Advanced Materials Research, Trans Tech Publications, 2010, vol. 112, pp. 49-62. ⟨10.4028/www.scientific.net/AMR.112.49⟩. ⟨hal-00815748⟩

Share

Metrics

Les métriques sont temporairement indisponibles