K. Andrews, M. Shillor, S. Wright, and A. Klarbring, A dynamic thermoviscoelastic contact problem with friction and wear, International Journal of Engineering Science, vol.35, issue.14, pp.1291-1309, 1997.
DOI : 10.1016/S0020-7225(97)87426-5

N. Carpenter, R. Taylor, and M. Katona, Lagrange constraints for transient finite element surface contact, International Journal for Numerical Methods in Engineering, vol.1, issue.1, pp.130-128, 1991.
DOI : 10.1002/nme.1620320107
URL : https://hal.archives-ouvertes.fr/hal-01389918

R. R. Craig and C. C. Bampton, Coupling of substructures for dynamics analyses, AIAA Journal, vol.67, pp.1313-1319, 1968.

A. Dmitriev, A. Smolin, V. Popov, and S. Psakhie, A multilevel computer simulation of friction and wear by numerical methods of discrete mechanics and a phenomenological theory, Physical Mesomechanics, vol.12, issue.1-2, 2009.
DOI : 10.1016/j.physme.2009.03.002

J. Jiang, J. Ahrens, H. Ulbrich, and E. Scheideler, Contact model of a rotating rubbing blade, Proceedings of the 5th International Conference on Rotor Dynamics of the IFTOMM, 1998.

T. Laursen, Computational contact and impact mechanics -Fundamentals of modeling interfacial phenomena in nonlinear finite element analysis, p.3540429069, 2002.

D. Laxalde and M. Legrand, Nonlinear Modal Analysis of Mechanical Systems with Frictionless Contact Interfaces " . Computational Mechanics 47, p.492775, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00413696

M. Legrand, C. Pierre, P. Cartraud, and J. Lombard, Two-dimensional modeling of an aircraft engine structural bladed disk-casing modal interaction, Journal of Sound and Vibration, vol.319, issue.1-2, pp.366-391, 2009.
DOI : 10.1016/j.jsv.2008.06.019
URL : https://hal.archives-ouvertes.fr/hal-00328186

N. Lesaffre, J. Sinou, and F. Thouverez, Contact analysis of a flexible bladed-rotor, European Journal of Mechanics - A/Solids, vol.26, issue.3, 2007.
DOI : 10.1016/j.euromechsol.2006.11.002
URL : https://hal.archives-ouvertes.fr/hal-00322887

X. Ma and A. Matthews, Investigation of abradable seal coating performance using scratch testing, Surface and Coatings Technology, vol.202, issue.4-7, pp.4-7, 2007.
DOI : 10.1016/j.surfcoat.2007.07.076
URL : https://hal.archives-ouvertes.fr/hal-01430526

A. Millecamps, J. F. Brunel, P. Dufrénoy, F. Garcin, and M. Nucci, Influence of Thermal Effects During Blade-Casing Contact Experiments, Volume 1: 22nd Biennial Conference on Mechanical Vibration and Noise, Parts A and B, 2009.
DOI : 10.1115/DETC2009-86842
URL : https://hal.archives-ouvertes.fr/hal-01223060

C. Padova, J. Barton, M. G. Dunn, S. Manwaring, G. Young et al., Development of an Experimental Capability to Produce Controlled Blade Tip/Shroud Rubs at Engine Speed, Journal of Turbomachinery, vol.1274, issue.1, pp.726-735, 2005.

C. Padova, J. Barton, M. Dunn, and S. Manwaring, Experimental Results From Controlled Blade Tip/Shroud Rubs at Engine Speed, Journal of Turbomachinery, vol.1294, pp.713-723, 2007.
URL : https://hal.archives-ouvertes.fr/hal-01333702

E. Rabinowicz, Friction and Wear of Materials, Journal of Applied Mechanics, vol.33, issue.2, p.471830844, 1965.
DOI : 10.1115/1.3625110

L. Salles, L. Blanc, F. Thouverez, and A. Gouskov, Dynamic Analysis of Fretting Wear in Friction Contact Interfaces, Journal of Engineering for Gas Turbines and Power, vol.131, 2010.

J. C. Simo and R. L. Taylor, A return mapping algorithm for plane stress elastoplasticity, International Journal for Numerical Methods in Engineering, vol.33, issue.18, 1986.
DOI : 10.1002/nme.1620220310

J. Simo and T. Hughes, Computational inelasticity, p.387975209, 1998.

S. K. Sinha, Non-linear dynamic response of a rotating radial Timoshenko beam with periodic pulse loading at the free-end, International Journal of Non-Linear Mechanics, vol.40, issue.1, 2005.
DOI : 10.1016/j.ijnonlinmec.2004.05.019

A. Sternchüss and E. Balmes, On the reduction of quasi-cyclic disk models with variable rotation speeds, Proceedings ISMA. France, p.266394

N. Strömberg, L. Johansson, and A. Klarbring, Derivation and analysis of a generalized standard model for contact, friction and wear, International Journal of Solids and Structures, vol.33, issue.13, pp.1817-1836, 1996.
DOI : 10.1016/0020-7683(95)00140-9

Y. F. Wang and Z. G. Yang, Finite element model of erosive wear on ductile and brittle materials, Wear, vol.265, issue.5-6, pp.5-6, 2008.
DOI : 10.1016/j.wear.2008.01.014

R. J. Williams, Simulation of Blade Casing Interaction Phenomena in Gas Turbines Resulting From Heavy Tip Rubs Using an Implicit Time Marching Method, Volume 6: Structures and Dynamics, Parts A and B, pp.2011-45495, 2011.
DOI : 10.1115/GT2011-45495

P. Wriggers, Computational contact mechanics, p.3540326081, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00466790

M. Yi, J. He, B. Huang, and H. Zhou, Friction and wear behaviour and abradability of abradable seal coating, Wear, vol.231, issue.1, pp.47-53, 1999.
DOI : 10.1016/S0043-1648(99)00093-9