M. Abouaf, J. L. Chenot, G. Raisson, and P. Baudouin, Finite element simulation of hot isostatic pressing of metal powders, International Journal for Numerical Methods in Engineering, vol.22, issue.1, pp.191-212, 1988.
DOI : 10.1002/nme.1620250116

E. Aifantis, The physics of plastic deformation, International Journal of Plasticity, vol.3, issue.3, pp.211-248, 1987.
DOI : 10.1016/0749-6419(87)90021-0

L. Anand, K. H. Kim, and T. G. Shawki, Onset of shear localization in viscoplastic solids, Journal of the Mechanics and Physics of Solids, vol.35, issue.4, pp.407-429, 1987.
DOI : 10.1016/0022-5096(87)90045-7

A. Pires, F. M. , C. De-sa, J. M. , C. Sousa et al., Numerical modelling of ductile plastic damage in bulk metal forming, International Journal of Mechanical Sciences, vol.45, issue.2, pp.273-294, 2003.
DOI : 10.1016/S0020-7403(03)00051-1

A. Aravas, P. Castan?edacastan?eda, and P. , Numerical methods for porous metals with deformation-induced anisotropy, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.36-38, pp.36-38, 2004.
DOI : 10.1016/j.cma.2004.02.009

N. Aravas, On the numerical integration of a class of pressure-dependent plasticity models, International Journal for Numerical Methods in Engineering, vol.32, issue.7, pp.1395-1416, 1987.
DOI : 10.1002/nme.1620240713

A. S. Argon, J. Im, and R. Safoglu, Cavity formation from inclusions in ductile fracture, Metallurgical Transactions A, vol.5, issue.121, pp.825-837, 1975.
DOI : 10.1007/BF02672306

F. Armero and S. Oller, A general framework for continuum damage models. II. Integration algorithms, with applications to the numerical simulation of porous metals, International Journal of Solids and Structures, vol.37, issue.48-50, pp.48-50, 2000.
DOI : 10.1016/S0020-7683(00)00206-7

S. Arndt, B. Svendsen, and D. Klingbeil, Modellierung Der Eigenspannungen and Der Ribspitze Mit Einem Scha¨gigungsmodellScha¨gigungsmodell, pp.323-332, 1997.

D. Aubry, G. Jay, B. Tie, and R. Muzzolini, A combined mesh and model adaptive strategy for the scaling issues in the numerical modelling of the ductile damage in thin panels, Computer Methods in Applied Mechanics and Engineering, vol.192, issue.28-30, pp.28-30, 2003.
DOI : 10.1016/S0045-7825(03)00351-7

L. Babout, E. Maire, J. Y. Buffie´rebuffie´re, and R. Fouge´resfouge´res, Characterization by X-ray computed tomography of decohesion, porosity growth and coalescence in model metal matrix composites, Acta Materialia, vol.49, issue.11, pp.2055-2063, 2001.
DOI : 10.1016/S1359-6454(01)00104-5
URL : https://hal.archives-ouvertes.fr/hal-00475312

J. P. Bandstra and D. A. Koss, On the influence of void clusters on void growth and coalescence during ductile fracture, Acta Materialia, vol.56, issue.16, pp.4429-4439, 2008.
DOI : 10.1016/j.actamat.2008.05.009

Y. Bao and R. Treitler, Ductile crack formation on notched Al2024-T351 bars under compression???tension loading, Materials Science and Engineering A, vol.384, issue.1-2, pp.385-394, 2004.
DOI : 10.1016/S0921-5093(04)00883-4

Y. Bao and T. Wierzbicki, On fracture locus in the equivalent strain and stress triaxiality space, International Journal of Mechanical Sciences, vol.46, issue.1, pp.81-98, 2004.
DOI : 10.1016/j.ijmecsci.2004.02.006

G. Barbier, A. Benallal, and V. Cano, Relation Theórique Entre la Me´thodeMe´thode de Perturbation Lineáire et l'analyse de Bifurcation Pour la Pre´dictionPre´diction de la Localisation Des De´formationsDe´formations, C. R. Acad. Sci. Paris, issue.3, pp.326-153, 1998.

R. Bargellini, J. Besson, E. Lorentz, and S. Michel-ponnelle, A Nonlocal Finite Element Based on Volumetric Strain Gradient: Application to Ductile Fracture Available Online at, Comput. Mat. Sci, 2007.

F. Barlat, D. J. Lege, and J. C. Brem, A six-component yield function for anisotropic materials, International Journal of Plasticity, vol.7, issue.7, pp.693-712, 1991.
DOI : 10.1016/0749-6419(91)90052-Z

I. Barsoum and J. Faleskog, Rupture mechanisms in combined tension and shear???Experiments, International Journal of Solids and Structures, vol.44, issue.6, pp.1768-1786, 2007.
DOI : 10.1016/j.ijsolstr.2006.09.031

I. Barsoum and J. Faleskog, Rupture mechanisms in combined tension and shear???Micromechanics, International Journal of Solids and Structures, vol.44, issue.17, pp.44-5481, 2007.
DOI : 10.1016/j.ijsolstr.2007.01.010
URL : http://doi.org/10.1016/j.ijsolstr.2007.01.010

Z. P. Bazant and G. Pijaudier-cabot, Nonlocal Continuum Damage, Localization Instability and Convergence, Journal of Applied Mechanics, vol.55, issue.2, pp.287-294, 1988.
DOI : 10.1115/1.3173674

R. Smelser, R. E. , R. , and O. , The Effect of Void Shape on the Development of Damage and Fracture in Plane Strain Tension, J. Mech. Phys. Solids, vol.37, pp.111-129, 1989.

A. Benzerga, Rupture d'aciers Pour Gazoducs, 2000.

A. A. Benzerga and J. Besson, Plastic potentials for anisotropic porous solids, European Journal of Mechanics - A/Solids, vol.20, issue.3, pp.397-434, 2001.
DOI : 10.1016/S0997-7538(01)01147-0

A. Benzerga, J. Besson, and A. Pineau, Coalescence-Controlled Anisotropic Ductile Fracture, Journal of Engineering Materials and Technology, vol.121, issue.2, pp.121-229, 1999.
DOI : 10.1115/1.2812369

F. M. Beremin, Cavity formation from inclusions in ductile fracture of A508 steel, Metallurgical Transactions A, vol.67, issue.3, pp.723-731, 1981.
DOI : 10.1007/BF02648336

M. Berveiller and A. Zaoui, An extension of the self-consistent scheme to plastically-flowing polycrystals, Journal of the Mechanics and Physics of Solids, vol.26, issue.5-6, pp.325-344, 1978.
DOI : 10.1016/0022-5096(78)90003-0

J. Besson, L. Devillers-guerville, and A. Pineau, Modeling of scatter and size effect in ductile fracture: application to thermal embrittlement of duplex stainless steels, Engineering Fracture Mechanics, vol.67, issue.2, pp.169-190, 2000.
DOI : 10.1016/S0013-7944(00)00056-4

J. Besson and C. Guillemer-neel, An extension of the Green and Gurson models to kinematic hardening, Mechanics of Materials, vol.35, issue.1-2, pp.1-18, 2003.
DOI : 10.1016/S0167-6636(02)00169-2

J. Besson, D. Steglich, and W. Brocks, Modeling of crack growth in round bars and plane strain specimens, International Journal of Solids and Structures, vol.38, issue.46-47, pp.46-47, 2001.
DOI : 10.1016/S0020-7683(01)00167-6

J. Besson, D. Steglich, and W. Brocks, Modeling of plane strain ductile rupture, International Journal of Plasticity, vol.19, issue.10, pp.1517-1541, 2003.
DOI : 10.1016/S0749-6419(02)00022-0

R. Billardon and I. Doghri, Prediction of Macro-Crack Initiation By Damage Localization, C. R. Acad. Sci. Paris, pp.308-347, 1989.

S. Blazy, A. Marie-louise, S. Forest, Y. Chastel, A. Pineau et al., Deformation and fracture of aluminium foams under proportional and non proportional multi-axial loading: statistical analysis and size effect, International Journal of Mechanical Sciences, vol.46, issue.2, pp.217-244, 2004.
DOI : 10.1016/j.ijmecsci.2004.03.005
URL : https://hal.archives-ouvertes.fr/hal-00164524

D. Bonnenfant, F. Mazerolle, and P. Suquet, Compaction of powders containing hard inclusions: experiments and micromechanical modeling, Mechanics of Materials, vol.29, issue.2, pp.93-109, 1998.
DOI : 10.1016/S0167-6636(97)00071-9

N. Bonora, A nonlinear CDM model for ductile failure, Engineering Fracture Mechanics, vol.58, issue.1-2, pp.11-28, 1997.
DOI : 10.1016/S0013-7944(97)00074-X

N. Bonora and P. P. Milella, Constitutive modeling for ductile metals behavior incorporating strain rate, temperature and damage mechanics, International Journal of Impact Engineering, vol.26, issue.1-10, pp.1-10, 2001.
DOI : 10.1016/S0734-743X(01)00063-X

C. Bordreuil, J. C. Boyer, . Salle´, and E. Salle´, On Modelling the Growth and the Orientation Changes of Ellipsoidal Voids in a Rigid Plastic Matrix, Modelling Simul, Mater. Sci. Eng, vol.11, issue.3, pp.365-380, 2003.

. Borre´, G. Borre´, and G. Maier, On linear versus nonlinear flow rules in strain localization analysis, Meccanica, vol.29, issue.N. 3, pp.36-41, 1989.
DOI : 10.1007/BF01576001

P. O. Bouchard, F. Bay, Y. Chastel, and I. Tovena, Crack propagation modelling using an advanced remeshing technique, Computer Methods in Applied Mechanics and Engineering, vol.189, issue.3, pp.723-742, 2000.
DOI : 10.1016/S0045-7825(99)00324-2
URL : https://hal.archives-ouvertes.fr/hal-00677709

W. Brocks, D. Z. Sun, and A. Ho¨nigho¨nig, Verification of the transferability of micromechanical parameters by cell model calculations with visco-plastic materials, International Journal of Plasticity, vol.11, issue.8, pp.971-989, 1995.
DOI : 10.1016/S0749-6419(95)00039-9

D. Brokken, W. A. Brekelmans, and F. P. Baaijens, Predicting the shape of blanked products: a finite element approach, Journal of Materials Processing Technology, vol.103, issue.1, pp.51-56, 2000.
DOI : 10.1016/S0924-0136(00)00418-0

F. Bron, DO?chirureDO?DO?chirure Ductile Des Tles Minces En Alliage D'aluminium 2024 Pour Application AO?ronautiqueAO?AO?ronautique, 2004.

F. Bron and J. Besson, A yield function for anisotropic materials Application to aluminum alloys, International Journal of Plasticity, vol.20, issue.4-5, pp.937-963, 2004.
DOI : 10.1016/j.ijplas.2003.06.001
URL : https://hal.archives-ouvertes.fr/hal-00165873

F. Bron and J. Besson, Simulation of the ductile tearing for two grades of 2024 aluminum alloy thin sheets, Engineering Fracture Mechanics, vol.73, issue.11, pp.1531-1552, 2006.
DOI : 10.1016/j.engfracmech.2006.01.024
URL : https://hal.archives-ouvertes.fr/hal-00136710

F. Bron, J. Besson, and A. Pineau, Ductile rupture in thin sheets of two grades of 2024 aluminum alloy, Materials Science and Engineering: A, vol.380, issue.1-2, pp.356-364, 2004.
DOI : 10.1016/j.msea.2004.04.008
URL : https://hal.archives-ouvertes.fr/hal-00144979

L. M. Brown and J. D. Embury, The Initiation and Growth of Voids at Second Phase Particles, Proc. Third Int. Conf. on the Strength of Metals and Alloys, 1973.

M. Brunet and F. Morestin, Experimental and analytical necking studies of anisotropic sheet metals, Journal of Materials Processing Technology, vol.112, issue.2-3, pp.214-226, 2001.
DOI : 10.1016/S0924-0136(01)00578-7
URL : https://hal.archives-ouvertes.fr/hal-00455837

M. Brunet, F. Morestin, and H. Walter-leberre, Failure analysis of anisotropic sheet-metals using a non-local plastic damage model, Journal of Materials Processing Technology, vol.170, issue.1-2, pp.457-470, 2005.
DOI : 10.1016/j.jmatprotec.2005.05.046
URL : https://hal.archives-ouvertes.fr/hal-00368447

S. Castagne, A. M. Habraken, and S. Cescotto, Application of a Damage Model to an Aluminum Alloy, International Journal of Damage Mechanics, vol.12, issue.1, pp.5-30, 2003.
DOI : 10.1177/1056789503012001001

J. L. Chaboche, Continuous damage mechanics ??? A tool to describe phenomena before crack initiation, Nuclear Engineering and Design, vol.64, issue.2, pp.233-247, 1981.
DOI : 10.1016/0029-5493(81)90007-8

J. L. Chaboche, Development of Continuum Damage Mechanics for Elastic Solids Sustaining Anisotropic and Unilateral Damage, International Journal of Damage Mechanics, vol.2, issue.4, pp.311-329, 1993.
DOI : 10.1177/105678959300200401

J. L. Chaboche, A review of some plasticity and viscoplasticity constitutive theories, International Journal of Plasticity, vol.24, issue.10, pp.1642-1693, 2008.
DOI : 10.1016/j.ijplas.2008.03.009

J. L. Chaboche, M. Boudifa, and K. Saanouni, A CDM Approach of Ductile Damage with Plastic Compressibility, International Journal of Fracture, vol.32, issue.1, pp.1-4, 2006.
DOI : 10.1007/s10704-005-3061-5

A. Cherouat, H. Saanouni, and Y. Hammi, Numerical improvement of thin tubes hydroforming with respect to ductile damage, International Journal of Mechanical Sciences, vol.44, issue.12, pp.2427-2446, 2002.
DOI : 10.1016/S0020-7403(02)00177-7

C. L. Chow and J. Wang, An anisotropic theory of continuum damage mechanics for ductile fracture, Engineering Fracture Mechanics, vol.27, issue.5, pp.547-558, 1987.
DOI : 10.1016/0013-7944(87)90108-1

C. L. Chow and J. Wang, Ductile fracture characterization with an anisotropic continuum damage theory, Engineering Fracture Mechanics, vol.30, issue.5, pp.547-563, 1988.
DOI : 10.1016/0013-7944(88)90150-6

C. L. Chow and J. Wang, A Finite Element Analysis of Continuum Damage Mechanics for Ductile Fracture, Int. J. Frac, vol.38, pp.83-102, 1988.

C. C. Chu and A. Needleman, Void Nucleation Effects in Biaxially Stretched Sheets, Journal of Engineering Materials and Technology, vol.102, issue.3, pp.249-256, 1980.
DOI : 10.1115/1.3224807

J. P. Cordebois and F. Sidoroff, Endommagement anisotrope en eíasticiteét plasticite´,plasticite´, J. Me´ca. The´o. et Applique´e Nume´ro spe´cial, pp.45-60, 1982.

A. Cornec, I. Scheider, and K. H. Schwalbe, On the practical application of the cohesive model, Engineering Fracture Mechanics, vol.70, issue.14, p.1963, 1987.
DOI : 10.1016/S0013-7944(03)00134-6

D. S. Dawicke, R. S. Piascik, and J. C. Newman-jr, Prediction of Stable Tearing and Fracture of a 2000 Series Aluminium Alloy Plate Using a CTOA Criterion, Fatigue and Fracture Mechanics ASTM STP 1296, ASTM, pp.90-104, 1997.

D. Borst and R. , SIMULATION OF STRAIN LOCALIZATION: A REAPPRAISAL OF THE COSSERAT CONTINUUM, Engineering Computations, vol.8, issue.4, pp.317-332, 1991.
DOI : 10.1108/eb023842

R. Desmorat and S. Cantournet, Modeling Microdefects Closure Effect with Isotropic/Anisotropic Damage, International Journal of Damage Mechanics, vol.17, issue.1, pp.65-96, 2008.
DOI : 10.1177/1056789507069541
URL : https://hal.archives-ouvertes.fr/hal-00571169

E. Doege, T. El-dsoki, and D. Seibert, Prediction of necking and wrinkling in sheet-metal forming, Journal of Materials Processing Technology, vol.50, issue.1-4, pp.197-206, 1995.
DOI : 10.1016/0924-0136(94)01380-J

I. Doghri, Numerical implementation and analysis of a class of metal plasticity models coupled with ductile damage, International Journal for Numerical Methods in Engineering, vol.99, issue.2, pp.3403-3431, 1995.
DOI : 10.1002/nme.1620382004

K. Enakoutsa, J. B. Leblond, and G. Perrin, Numerical implementation and assessment of a phenomenological nonlocal model of ductile rupture, Computer Methods in Applied Mechanics and Engineering, vol.196, issue.13-16, 2007.
DOI : 10.1016/j.cma.2006.10.003

K. Enami, The effects of compressive and tensile prestrain on ductile fracture initiation in steels, Engineering Fracture Mechanics, vol.72, issue.7, pp.1089-1105, 2005.
DOI : 10.1016/j.engfracmech.2004.07.012

A. C. Eringen, Theory of thermo-microstretch elastic solids, International Journal of Engineering Science, vol.28, issue.12, pp.1291-1301, 1990.
DOI : 10.1016/0020-7225(90)90076-U

A. C. Eringen and D. G. Edelen, On nonlocal elasticity, International Journal of Engineering Science, vol.10, issue.3, pp.233-248, 1966.
DOI : 10.1016/0020-7225(72)90039-0

A. Eringen and E. Suhubi, Nonlinear theory of simple micro-elastic solids???I, International Journal of Engineering Science, vol.2, issue.2, pp.189-203, 1964.
DOI : 10.1016/0020-7225(64)90004-7

J. D. Eshelby, The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems, Proc. Roy. Soc, A, pp.357-396, 1957.

D. Fabre´guefabre´gue and T. Pardoen, A constitutive model for elastoplastic solids containing primary and secondary voids, Journal of the Mechanics and Physics of Solids, vol.56, issue.3, pp.719-741, 2008.
DOI : 10.1016/j.jmps.2007.07.008

J. Faleskog, X. Gao, and C. F. Shih, Cell model for nonlinear fracture analysis ? I Micromechanics calibration, International Journal of Fracture, vol.89, issue.4, pp.355-373, 1998.
DOI : 10.1023/A:1007421420901

N. Fleck, L. T. Kuhn, and R. M. Mcmeecking, Yielding of metal powder bonded by isolated contacts, Journal of the Mechanics and Physics of Solids, vol.40, issue.5, pp.40-1139, 1992.
DOI : 10.1016/0022-5096(92)90064-9

S. Forest, F. Barbe, and G. Cailletaud, Cosserat modelling of size effects in the mechanical behaviour of polycrystals and multi-phase materials, International Journal of Solids and Structures, vol.37, issue.46-47, pp.46-47, 2000.
DOI : 10.1016/S0020-7683(99)00330-3

S. Forest and R. Sievert, Nonlinear microstrain theories, International Journal of Solids and Structures, vol.43, issue.24, pp.7224-7245, 2006.
DOI : 10.1016/j.ijsolstr.2006.05.012
URL : https://hal.archives-ouvertes.fr/hal-00136739

C. Fressengeas and A. Molinari, Inertia and thermal effects on the localization of plastic flow, Acta Metallurgica, vol.33, issue.3, pp.387-396, 1985.
DOI : 10.1016/0001-6160(85)90081-1

V. Gaffard, J. Besson, and A. F. Gourgues-lorenzon, Creep failure model of a tempered martensitic stainless steel integrating multiple deformation and damage mechanisms, International Journal of Fracture, vol.19, issue.3, pp.139-166, 2005.
DOI : 10.1007/s10704-005-2528-8
URL : https://hal.archives-ouvertes.fr/hal-00154843

W. M. Garrison and N. R. Moody, Ductile fracture, Journal of Physics and Chemistry of Solids, vol.48, issue.11, pp.48-1035, 1987.
DOI : 10.1016/0022-3697(87)90118-1

N. Germain, J. Besson, and F. Feyel, Composite layered materials: Anisotropic nonlocal damage models, Computer Methods in Applied Mechanics and Engineering, vol.196, issue.41-44, pp.41-44, 2007.
DOI : 10.1016/j.cma.2007.04.009
URL : https://hal.archives-ouvertes.fr/hal-00170638

M. Gologanu, J. B. Leblond, and J. Devaux, Approximate models for ductile metals containing non-spherical voids???Case of axisymmetric prolate ellipsoidal cavities, Journal of the Mechanics and Physics of Solids, vol.41, issue.11, pp.41-1723, 1993.
DOI : 10.1016/0022-5096(93)90029-F

M. Gologanu, J. B. Leblond, and J. Devaux, Approximate Models for Ductile Metals Containing Nonspherical Voids???Case of Axisymmetric Oblate Ellipsoidal Cavities, Journal of Engineering Materials and Technology, vol.116, issue.3, pp.290-297, 1994.
DOI : 10.1115/1.2904290

M. Gologanu, J. B. Leblond, G. Perrin, and J. Devaux, Recent Extensions of Gurson???s Model for Porous Ductile Metals, Continuum Micromechanics, CISM Lectures Series, pp.61-130, 1997.
DOI : 10.1007/978-3-7091-2662-2_2

S. H. Goods and L. M. Brown, THE NUCLEATION OF CAVITIES BY PLASTIC DEFORMATION, Acta Metall, vol.27, pp.1-15, 1979.
DOI : 10.1016/B978-0-08-030541-7.50007-2

M. Grange, J. Besson, and E. Andrieu, An Anisotropic Gurson Model to Represent the Ductile Rupture of Hydrided Zircaloy?4 Sheets, International Journal of Fracture, vol.105, issue.3, pp.273-293, 2000.
DOI : 10.1023/A:1007615513884

M. Grange, J. Besson, and E. Andrieu, Anisotropic behavior and rupture of hydrided ZIRCALOY-4 sheets, Metallurgical and Materials Transactions A, vol.19, issue.8, pp.679-690, 2000.
DOI : 10.1007/s11661-000-0010-9

R. J. Green, A plasticity theory for porous solids, International Journal of Mechanical Sciences, vol.14, issue.4, pp.215-224, 1972.
DOI : 10.1016/0020-7403(72)90063-X

C. Guillemer-neel, X. Feaugas, and M. Clavel, Mechanical behavior and damage kinetics in nodular cast iron: Part I. Damage mechanisms, Metallurgical and Materials Transactions A, vol.42, issue.12, pp.3063-3074, 2000.
DOI : 10.1007/s11661-000-0085-3

C. Guillemer-neel, X. Feaugas, and M. Clavel, Mechanical behavior and damage kinetics in nodular cast iron: Part II. Hardening and damage, Metallurgical and Materials Transactions A, vol.141, issue.12, pp.3075-3085, 2000.
DOI : 10.1007/s11661-000-0086-2

A. L. Gurson, Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I???Yield Criteria and Flow Rules for Porous Ductile Media, Journal of Engineering Materials and Technology, vol.99, issue.1, pp.2-15, 1977.
DOI : 10.1115/1.3443401

G. T. Hahn and A. R. Rosenfield, Metallurgical factors affecting fracture toughness of aluminum alloys, Metallurgical Transactions A, vol.1, issue.4, pp.653-668, 1975.
DOI : 10.1007/BF02672285

D. Halm and A. Dragon, An anisotropic model of damage and frictional sliding for brittle materials, European Journal of Mechanics - A/Solids, vol.17, issue.3, pp.439-460, 1998.
DOI : 10.1016/S0997-7538(98)80054-5

Y. Hammi and M. F. Horstemeyer, A physically motivated anisotropic tensorial representation of damage with separate functions for void nucleation, growth, and coalescence, International Journal of Plasticity, vol.23, issue.10-11, pp.1641-1678, 2007.
DOI : 10.1016/j.ijplas.2007.03.010

R. Hill, The Mathematical Theory of Plasticity, 1950.

Y. Huang, Accurate Dilatation Rates for Spherical Voids in Triaxial Stress Fields, Journal of Applied Mechanics, vol.58, issue.4, pp.1084-1086, 1991.
DOI : 10.1115/1.2897686

T. J. Hughes, Generalization of selective integration procedures to anisotropic and nonlinear media, International Journal for Numerical Methods in Engineering, vol.3, issue.9, pp.1413-1418, 1980.
DOI : 10.1002/nme.1620150914

M. A. James and J. C. Newman, The effect of crack tunneling on crack growth: experiments and CTOA analyses, Engineering Fracture Mechanics, vol.70, issue.3-4, pp.457-468, 2003.
DOI : 10.1016/S0013-7944(02)00131-5

J. W. Ju, On energy-based coupled elastoplastic damage theories: Constitutive modeling and computational aspects, International Journal of Solids and Structures, vol.25, issue.7, pp.803-833, 1989.
DOI : 10.1016/0020-7683(89)90015-2

L. M. Kachanov, Time of the Rupture Process Under Creep Conditions, Isv. Akad. Nauk. SSR. Otd Tekh. Nauk, vol.8, pp.26-31, 1958.

M. Kailasam, N. Aravas, P. Castan?edacastan?eda, and P. , Porous Metals With Developing Anisotropy: Constitutive Models, Computational Issues and Applications To Deformation Processing, Comput. Model. Engrg Sci, vol.1, issue.2, pp.105-118, 2000.

M. Kailasam, P. Castan?edacastan?eda, and P. , A general constitutive theory for linear and nonlinear particulate media with microstructure evolution, Journal of the Mechanics and Physics of Solids, vol.46, issue.3, pp.427-465, 1998.
DOI : 10.1016/S0022-5096(97)00095-1

A. P. Karafillis and M. C. Boyce, A general anisotropic yield criterion using bounds and a transformation weighting tensor, Journal of the Mechanics and Physics of Solids, vol.41, issue.12, pp.1859-1886, 1993.
DOI : 10.1016/0022-5096(93)90073-O

A. S. Kim, J. Besson, and A. Pineau, Global and local approaches to fracture normal to interfaces, International Journal of Solids and Structures, vol.36, issue.12, pp.1845-1864, 1999.
DOI : 10.1016/S0020-7683(98)00062-6

A. S. Kim, S. Suresh, and C. F. Shih, Plasticity effects on fracture normal to interfaces with homogeneous and graded compositions, International Journal of Solids and Structures, vol.34, issue.26, pp.34-3415, 1997.
DOI : 10.1016/S0020-7683(96)00225-9

J. Kim and X. Gao, A generalized approach to formulate the consistent tangent stiffness in plasticity with application to the GLD porous material model, International Journal of Solids and Structures, vol.42, issue.1, pp.103-122, 2005.
DOI : 10.1016/j.ijsolstr.2004.07.011

J. Koplik and A. Needleman, Void growth and coalescence in porous plastic solids, International Journal of Solids and Structures, vol.24, issue.8, pp.835-853, 1988.
DOI : 10.1016/0020-7683(88)90051-0

D. Krajcinovic, Continuous Damage Mechanics Revisited: Basic Concepts and Definitions, Journal of Applied Mechanics, vol.52, issue.4, pp.829-834, 1985.
DOI : 10.1115/1.3169154

D. Krajcinovic, Damage mechanics, Mechanics of Materials, vol.8, issue.2-3, 1996.
DOI : 10.1016/0167-6636(89)90011-2
URL : https://hal.archives-ouvertes.fr/hal-00571166

E. Kro¨nerkro¨ner, Elasticity theory of materials with long range cohesive forces, International Journal of Solids and Structures, vol.3, issue.5, pp.731-742, 1967.
DOI : 10.1016/0020-7683(67)90049-2

M. Kuna and D. Z. Sun, Three-dimensional cell model analyses of void growth in ductile materials, International Journal of Fracture, vol.30, issue.3, pp.235-258, 1996.
DOI : 10.1007/BF00039573

J. B. Leblond, G. Perrin, and J. Devaux, An Improved Gurson?type Model for Hardenable Ductile Metals, Eur. J. Mech, vol.14, issue.4, pp.499-527, 1995.

J. B. Leblond, G. Perrin, and P. Suquet, Exact results and approximate models for porous viscoplastic solids, International Journal of Plasticity, vol.10, issue.3, pp.213-235, 1994.
DOI : 10.1016/0749-6419(94)90001-9

B. J. Lee and M. E. Mear, Stress concentration induced by an elastic spheroidal particle in a plastically deforming solid, Journal of the Mechanics and Physics of Solids, vol.47, issue.6, pp.47-1301, 1999.
DOI : 10.1016/S0022-5096(98)00104-5

J. Lemaitre, A Continuous Damage Mechanics Model for Ductile Fracture, Journal of Engineering Materials and Technology, vol.107, issue.1, pp.83-89, 1985.
DOI : 10.1115/1.3225775

J. Lemaitre, R. Desmorat, and M. Sausay, Anisotropic damage law of evolution, European Journal of Mechanics - A/Solids, vol.19, issue.2, pp.187-208, 2000.
DOI : 10.1016/S0997-7538(00)00161-3

Y. Liu, S. Murakami, and Y. Kanagawa, Mesh-dependence and Stress Singularity in Finite Element Analysis of Creep Crack Growth by Continuum Damage Mechanics Approach, Eur. J. Mech, issue.3, pp.13-395, 1994.

E. Lorentz and S. Andrieux, Analysis of non-local models through energetic formulations, International Journal of Solids and Structures, vol.40, issue.12, pp.2905-2936, 2003.
DOI : 10.1016/S0020-7683(03)00110-0

T. T. Luu, De´chirureDe´chirure Ductile Des Aciers a?Hautea?Haute Re´sistanceRe´sistance Pour Gazoducs (X100), 2006.

S. Mahmoud and K. Lease, The effect of specimen thickness on the experimental characterization of critical crack-tip-opening angle in 2024-T351 aluminum alloy, Engineering Fracture Mechanics, vol.70, issue.3-4, pp.443-456, 2003.
DOI : 10.1016/S0013-7944(02)00130-3

R. Mahnken, Aspects on the finite-element implementation of the Gurson model including parameter identification, International Journal of Plasticity, vol.15, issue.11, pp.1111-1137, 1999.
DOI : 10.1016/S0749-6419(99)00029-7

E. Maire, C. Bordreuil, L. Babout, and J. C. Boyer, Damage initiation and growth in metals. Comparison between modelling and tomography experiments, Journal of the Mechanics and Physics of Solids, vol.53, issue.11, pp.2411-2434, 2005.
DOI : 10.1016/j.jmps.2005.06.005
URL : https://hal.archives-ouvertes.fr/hal-00436860

E. Maire, J. Y. Buffiè-re, L. Salvo, J. J. Blandin, W. Ludwig et al., On the Application of X-ray Microtomography in the Field of Materials Science, Advanced Engineering Materials, vol.3, issue.8, pp.539-546, 2001.
DOI : 10.1002/1527-2648(200108)3:8<539::AID-ADEM539>3.0.CO;2-6
URL : https://hal.archives-ouvertes.fr/hal-00475297

B. Marini, F. Mudry, and A. Pineau, Experimental study of cavity growth in ductile rupture, Engineering Fracture Mechanics, vol.22, issue.6, pp.989-996, 1985.
DOI : 10.1016/0013-7944(85)90038-4

K. K. Mathur, A. Needleman, and V. Tvergaard, Three dimensional analysis of dynamic ductile crack growth in a thin plate, Journal of the Mechanics and Physics of Solids, vol.44, issue.3, pp.44-439, 1996.
DOI : 10.1016/0022-5096(95)00087-9

M. Clintock and F. A. , A Criterion for Ductile Fracture by the Growth of Holes, Journal of Applied Mechanics, vol.35, issue.2, pp.363-371, 1968.
DOI : 10.1115/1.3601204

M. E. Mear and J. W. Hutchinson, Influence of yield surface curvature on flow localization in dilatant plasticity, Mechanics of Materials, vol.4, issue.3-4, pp.395-407, 1985.
DOI : 10.1016/0167-6636(85)90035-3

J. Mediavilla, R. H. Peerlings, and M. G. Geers, Discrete crack modelling of ductile fracture driven by non-local softening plasticity, International Journal for Numerical Methods in Engineering, vol.37, issue.4, pp.661-688, 2006.
DOI : 10.1002/nme.1572

J. Mediavilla, R. H. Peerlings, and M. G. Geers, A robust and consistent remeshing-transfer operator for ductile fracture simulations, Computers & Structures, vol.84, issue.8-9, pp.8-9, 2006.
DOI : 10.1016/j.compstruc.2005.10.007

J. C. Michel, H. Moulinec, and P. Suquet, A computational scheme for linear and non???linear composites with arbitrary phase contrast, International Journal for Numerical Methods in Engineering, vol.58, issue.12, pp.139-158, 2001.
DOI : 10.1002/nme.275

J. C. Michel and P. Suquet, The constitutive law of nonlinear viscous and porous materials, Journal of the Mechanics and Physics of Solids, vol.40, issue.4, pp.783-812, 1992.
DOI : 10.1016/0022-5096(92)90004-L

R. Mindlin and N. Eshel, On first strain-gradient theories in linear elasticity, International Journal of Solids and Structures, vol.4, issue.1, pp.109-124, 1968.
DOI : 10.1016/0020-7683(68)90036-X

N. Moes and T. Belytschko, Extended finite element method for cohesive crack growth, Engineering Fracture Mechanics, vol.69, issue.7, pp.813-833, 2002.
DOI : 10.1016/S0013-7944(01)00128-X
URL : https://hal.archives-ouvertes.fr/hal-01461938

V. Monchiet, O. Cazacu, E. Charkaluk, and D. Kondo, Macroscopic yield criteria for plastic anisotropic materials containing spheroidal voids, Macroscopic Yield Criteria for Plastic Anisotropic Materials Containing Spheroidal Voids, pp.1158-1189, 2008.
DOI : 10.1016/j.ijplas.2007.08.008
URL : https://hal.archives-ouvertes.fr/hal-00687823

V. Monchiet, C. Gruescu, E. Charkaluk, and D. Kondo, Approximate yield criteria for anisotropic metals with prolate or oblate voids, Comptes Rendus M??canique, vol.334, issue.7, pp.431-439, 2006.
DOI : 10.1016/j.crme.2006.06.001
URL : https://hal.archives-ouvertes.fr/hal-00090592

T. F. Morgeneyer, M. J. Starink, and I. Sinclair, Evolution of voids during ductile crack propagation in an aluminium alloy sheet toughness test studied by synchrotron radiation computed tomography, Acta Materialia, vol.56, issue.8, pp.1671-1679, 2008.
DOI : 10.1016/j.actamat.2007.12.019

S. Murakami, Notion of Continuum Damage Mechanics and its Application to Anisotropic Creep Damage Theory, Journal of Engineering Materials and Technology, vol.105, issue.2, pp.99-105, 1983.
DOI : 10.1115/1.3225633

K. Nahshon and J. W. Hutchinson, Modification of the Gurson Model for shear failure, European Journal of Mechanics - A/Solids, vol.27, issue.1, pp.1-17, 2008.
DOI : 10.1016/j.euromechsol.2007.08.002

A. Needleman, A Continuum Model for Void Nucleation by Inclusion Debonding, Journal of Applied Mechanics, vol.54, issue.3, pp.525-531, 1987.
DOI : 10.1115/1.3173064

A. Needleman, An analysis of tensile decohesion along an interface, Journal of the Mechanics and Physics of Solids, vol.38, issue.3, pp.289-324, 1990.
DOI : 10.1016/0022-5096(90)90001-K

A. Needleman and J. R. Rice, Limits to Ductility Set by Plastic Flow Localization, Mechanics of Sheet Metal Forming, pp.237-267, 1978.
DOI : 10.1007/978-1-4613-2880-3_10

O. Dowd, N. P. Shih, and C. F. , Family of Crack-tip Fields Characterized by a Triaxiality Parameter-I. Structure of Fields, J. Mech. Phys. Solids, issue.8, pp.39-989, 1991.

O. Dowd, N. P. Shih, and C. F. , Family of Crack-tip Fields Characterized by a Triaxiality Parameter-II. Fracture applications, J. Mech. Phys. Solids, issue.8, pp.40-939, 1992.

M. Ortiz and J. J. Quigley, Adaptive mesh refinement in strain localization problems, Computer Methods in Applied Mechanics and Engineering, vol.90, issue.1-3, pp.781-804, 1991.
DOI : 10.1016/0045-7825(91)90184-8

T. Pardoen and J. W. Hutchinson, An extended model for void growth and coalescence, Journal of the Mechanics and Physics of Solids, vol.48, issue.12, pp.48-2467, 2000.
DOI : 10.1016/S0022-5096(00)00019-3

T. Pardoen and J. W. Hutchinson, Micromechanics-based model for trends in toughness of ductile metals, Acta Materialia, vol.51, issue.1, pp.133-148, 2003.
DOI : 10.1016/S1359-6454(02)00386-5

J. Pastor, P. Francescato, M. Trillat, E. Loute, and G. Rousselier, Ductile failure of cylindrically porous materials. Part II: other cases of symmetry, European Journal of Mechanics - A/Solids, vol.23, issue.2, pp.23-191, 2004.
DOI : 10.1016/j.euromechsol.2003.12.002

A. Pineau, Review of Fracture Micromechanisms and a Local Approach to Predicting Crack Resistance In Low Strength Steels, Proc. ICF 5 Conference, 1980.

A. Pineau, Development of the Local Approach to Fracture Over the Past 25 Years: Theory and Applications, Int. J. Frac, vol.138, pp.1-4, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00136833

P. Castan?edacastan?eda, P. Suquet, and P. , Nonlinear Composites, Adv. in Appl. Mech, vol.34, pp.171-302, 1998.
DOI : 10.1016/S0065-2156(08)70321-1

P. Ponte-castan?edacastan?eda and M. Zaidman, Constitutive models for porous materials with evolving microstructure, Journal of the Mechanics and Physics of Solids, vol.42, issue.9, pp.1459-1495, 1994.
DOI : 10.1016/0022-5096(94)90005-1

F. Prat, M. Grange, J. Besson, and E. Andrieu, Behavior and rupture of hydrided ZIRCALOY-4 tubes and sheets, Metallurgical and Materials Transactions A, vol.70, issue.1, pp.1643-1651, 1998.
DOI : 10.1007/s11661-998-0087-0

F. Reusch, B. Svendsen, and D. Klingbeil, Local and non-local Gurson-based ductile damage and failure modelling at large deformation, European Journal of Mechanics - A/Solids, vol.22, issue.6, pp.779-792, 2003.
DOI : 10.1016/S0997-7538(03)00070-6

J. R. Rice, A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks, Journal of Applied Mechanics, vol.35, issue.2, p.379, 1968.
DOI : 10.1115/1.3601206

J. R. Rice, The Localisation of Plastic Deformation, Proc. 14th Int. Conf. Theoretical and Applied Mechanics, 1976.

J. R. Rice, The Mechanics of Earthquake Rupture, Proceedings of the International School of Physics 'Enrico Fermi, pp.555-649, 1980.

J. R. Rice and D. M. Tracey, On the ductile enlargement of voids in triaxial stress fields???, Journal of the Mechanics and Physics of Solids, vol.17, issue.3, pp.201-217, 1969.
DOI : 10.1016/0022-5096(69)90033-7

E. Riks, An incremental approach to the solution of snapping and buckling problems, International Journal of Solids and Structures, vol.15, issue.7, pp.529-551, 1979.
DOI : 10.1016/0020-7683(79)90081-7

M. Ristinmaa, Void growth in cyclic loaded porous plastic solid, Mechanics of Materials, vol.26, issue.4, pp.227-245, 1997.
DOI : 10.1016/S0167-6636(97)00031-8

R. O. Ritchie, J. F. Knott, and J. R. Rice, On the relationship between critical tensile stress and fracture toughness in mild steel, Journal of the Mechanics and Physics of Solids, vol.21, issue.6, pp.395-410, 1973.
DOI : 10.1016/0022-5096(73)90008-2

F. Rivalin, J. Besson, D. Fant, M. Pineau, and A. , Ductile tearing of pipeline-steel wide plates, Engineering Fracture Mechanics, vol.68, issue.3, pp.347-364, 2000.
DOI : 10.1016/S0013-7944(00)00108-9

G. Rousselier, Ductile fracture models and their potential in local approach of fracture, Nuclear Engineering and Design, vol.105, issue.1, pp.97-111, 1987.
DOI : 10.1016/0029-5493(87)90234-2

G. Rousselier, Application de l'analyse de Stabilite´dStabilite´d'une Perturbation a` la Localisation de la De´formationDe´formation Dans un Mate´riauMate´riau Dilatable Adoucissant, C. R. Acad. Sci. Paris, pp.313-1367, 1991.

G. Rousselier, Stabilite´LocaleStabilite´Locale et Modes de Rupture Ductile, C. R. Acad. Sci. Paris, vol.320, pp.69-75, 1995.

G. Rousselier, Dissipation in porous metal plasticity and ductile fracture, Journal of the Mechanics and Physics of Solids, vol.49, issue.8, pp.1727-1746, 2001.
DOI : 10.1016/S0022-5096(01)00013-8

G. Rousselier and S. Leclercq, A simplified ???polycrystalline??? model for viscoplastic and damage finite element analyses, International Journal of Plasticity, vol.22, issue.4, pp.685-712, 2006.
DOI : 10.1016/j.ijplas.2005.04.011

Y. D. Roychowdhury, D. Jr, and R. H. , Ductile tearing in thin aluminum panels: experiments and analyses using large-displacement, 3-D surface cohesive elements, Engineering Fracture Mechanics, vol.69, issue.8, pp.983-1002, 2002.
DOI : 10.1016/S0013-7944(01)00113-8

J. W. Rudnicki and J. R. Rice, Conditions for the localization of deformation in pressure-sensitive dilatant materials, Journal of the Mechanics and Physics of Solids, vol.23, issue.6, pp.371-394, 1975.
DOI : 10.1016/0022-5096(75)90001-0

C. Ruggieri and R. Dodds, A transferability model for brittle fracture including constraint and ductile tearing effects: a probabilistic approach, International Journal of Fracture, vol.22, issue.2, pp.309-340, 1996.
DOI : 10.1007/BF00018594

K. Saanouni, Virtual metal forming including the ductile damage occurrence, Journal of Materials Processing Technology, vol.177, issue.1-3, pp.19-25, 2006.
DOI : 10.1016/j.jmatprotec.2006.03.226

K. Saanouni, J. L. Chaboche, and P. M. Lesne, On the Creep Crack Growth Prediction By a Non Local Damage Formulation, Eur. J. Mech, issue.6, pp.8-437, 1989.

S. Catherine, C. Poussard, C. Vodinh, J. Schill, R. Hourdequin et al., Finite Element Simulations and Empirical Correlation for Charpy?V and sub?size Charpy Tests on an Unirradiated low Alloy RPV Ferritic Steel, Fourth symposium on small specimen test techniques, 1418.

I. Scheider and W. Brocks, Simulation of cup???cone fracture using the cohesive model, Engineering Fracture Mechanics, vol.70, issue.14, pp.1943-1961, 2003.
DOI : 10.1016/S0013-7944(03)00133-4

J. Segurado and J. Llorca, A new three-dimensional interface finite element to simulate fracture in composites, International Journal of Solids and Structures, vol.41, issue.11-12, pp.11-12, 2004.
DOI : 10.1016/j.ijsolstr.2004.01.007

S. Shima and M. Oyane, Plasticity theory for porous metals, International Journal of Mechanical Sciences, vol.18, issue.6, pp.285-291, 1976.
DOI : 10.1016/0020-7403(76)90030-8

F. Sidoroff and A. Dogui, Some issues about anisotropic elastic???plastic models at finite strain, International Journal of Solids and Structures, vol.38, issue.52, pp.9569-9578, 2001.
DOI : 10.1016/S0020-7683(01)00139-1

T. Siegmund and W. Brocks, Prediction of the Work of Separation and Implications to Modelling, International Journal of Fracture, vol.99, issue.1/2, pp.97-116, 1999.
DOI : 10.1023/A:1018300226682

J. C. Simo, Algorithms for static and dynamic multiplicative plasticity that preserve the classical return mapping schemes of the infinitesimal theory, Computer Methods in Applied Mechanics and Engineering, vol.99, issue.1, pp.61-112, 1992.
DOI : 10.1016/0045-7825(92)90123-2

J. C. Simo and C. Miehe, Associative coupled thermoplasticity at finite strains: Formulation, numerical analysis and implementation, Computer Methods in Applied Mechanics and Engineering, vol.98, issue.1, pp.41-104, 1992.
DOI : 10.1016/0045-7825(92)90170-O

J. C. Simo and R. L. Taylor, Consistent tangent operators for rate-independent elastoplasticity, Computer Methods in Applied Mechanics and Engineering, vol.48, issue.1, pp.101-118, 1985.
DOI : 10.1016/0045-7825(85)90070-2

J. C. Simo, R. L. Taylor, and K. S. Pister, Variational and projection methods for the volume constraint in finite deformation elasto-plasticity, Computer Methods in Applied Mechanics and Engineering, vol.51, issue.1-3, pp.177-208, 1985.
DOI : 10.1016/0045-7825(85)90033-7

J. C. Simo and J. W. Ju, Strain- and stress-based continuum damage models???I. Formulation, International Journal of Solids and Structures, vol.23, issue.7, pp.821-840, 1987.
DOI : 10.1016/0020-7683(87)90083-7

J. C. Simo and J. W. Ju, Strain- and stress-based continuum damage models???II. Computational aspects, International Journal of Solids and Structures, vol.23, issue.7, pp.841-869, 1987.
DOI : 10.1016/0020-7683(87)90084-9

K. Siruguet and J. B. Leblond, Effect of void locking by inclusions upon the plastic behavior of porous ductile solids???I: theoretical modeling and numerical study of void growth, International Journal of Plasticity, vol.20, issue.2, pp.225-254, 2004.
DOI : 10.1016/S0749-6419(03)00018-4

K. Siruguet and J. B. Leblond, Effect of void locking by inclusions upon the plastic behavior of porous ductile solids???part II: theoretical modeling and numerical study of void coalescence, International Journal of Plasticity, vol.20, issue.2, pp.255-268, 2004.
DOI : 10.1016/S0749-6419(03)00019-6

D. Steglich and W. Brocks, Micromechanical modelling of the behaviour of ductile materials including particles, Computational Materials Science, vol.9, issue.1-2, pp.7-17, 1997.
DOI : 10.1016/S0927-0256(97)00053-0

D. Steglich and W. Brocks, MICROMECHANICAL MODELLING OF DAMAGE AND FRACTURE OF DUCTILE MATERIALS, Fatigue & Fracture of Engineering Materials & Structures, vol.49, issue.10, pp.1175-1188, 1998.
DOI : 10.1016/S0749-6419(95)00039-9

D. Steglich, T. Siegmund, and W. Brocks, Micromechanical modeling of damage due to particle cracking in reinforced metals, Computational Materials Science, vol.16, issue.1-4, pp.404-413, 1999.
DOI : 10.1016/S0927-0256(99)00083-X

N. Sukumar, N. Moes, B. Moran, and T. Belytschko, Extended finite element method for three-dimensional crack modelling, International Journal for Numerical Methods in Engineering, vol.15, issue.11, pp.48-1549, 2000.
DOI : 10.1002/1097-0207(20000820)48:11<1549::AID-NME955>3.0.CO;2-A
URL : https://hal.archives-ouvertes.fr/hal-01006859

J. D. Sumpter, An Experimental Investigation of the T Stress Approach, Constraint Effects in Fracture, ASTM STP 1171, 1993.

J. D. Sumpter and A. T. Forbes, Constraint based analysis of shallow cracks in mild steel, TWI/EWI/IS International Conference on Shallow Crack Fracture Mechanics, Toughness Tests and applications, 1992.
DOI : 10.1533/9780857093226.1.53

C. Y. Tang, C. L. Chow, W. Shen, and W. H. Tai, Development of a damage-based criterion for ductile fracture prediction in sheet metal forming, Journal of Materials Processing Technology, vol.91, issue.1-3, pp.270-277, 1999.
DOI : 10.1016/S0924-0136(98)00442-7

B. Tanguy, Modeíisation De L'essai Charpy Par l'approche Locale de la Rupture Application au cas de l'acier 16MND5 dans le domaine de la transition, 2001.

B. Tanguy and J. Besson, An Extension of the Rousselier Model to Viscoplastic Temperature Dependent Materials, International Journal of Fracture, vol.116, issue.1, pp.81-101, 2002.
DOI : 10.1023/A:1020192527733

B. Tanguy, T. T. Luu, G. Perrin, A. Pineau, and J. Besson, Plastic and damage behaviour of a high strength X100 pipeline steel: Experiments and modelling, International Journal of Pressure Vessels and Piping, vol.85, issue.5, pp.322-335, 2008.
DOI : 10.1016/j.ijpvp.2007.11.001
URL : https://hal.archives-ouvertes.fr/hal-00280890

P. F. Thomason, A Theory for Ductile Fracture by Internal Necking of Cavities, J. Ins. Metals, vol.96, pp.360-365, 1968.

P. F. Thomason, A three-dimensional model for ductile fracture by the growth and coalescence of microvoids, Acta Metallurgica, vol.33, issue.6, pp.1087-1095, 1985.
DOI : 10.1016/0001-6160(85)90202-0

P. F. Thomason, Three-dimensional models for the plastic limit-loads at incipient failure of the intervoid matrix in ductile porous solids, Acta Metallurgica, vol.33, issue.6, pp.1079-1085, 1985.
DOI : 10.1016/0001-6160(85)90201-9

C. I. Thomson, M. J. Worswick, A. K. Pilkey, and D. J. Lloyd, Void coalescence within periodic clusters of particles, Journal of the Mechanics and Physics of Solids, vol.51, issue.1, pp.51-127, 2003.
DOI : 10.1016/S0022-5096(02)00055-8

V. Tvergaard, Material Failure by Void Growth to Coalescence, Adv. in Appl. Mech, vol.27, pp.83-151, 1990.
DOI : 10.1016/S0065-2156(08)70195-9

V. Tvergaard and A. Needleman, Analysis of the cup-cone fracture in a round tensile bar, Acta Metallurgica, vol.32, issue.1, pp.157-169, 1984.
DOI : 10.1016/0001-6160(84)90213-X

G. Z. Voyiadjis and P. I. Kattan, Advances in Damage Mechanics: Metals and Metal Matrix Composites, 1999.
DOI : 10.1016/B978-0-08-043601-2.50005-2

C. C. Wang, A new representation theorem for isotropic functions: An answer to Professor G. F. Smith's criticism of my papers on representations for isotropic functions, Archive for Rational Mechanics and Analysis, vol.36, issue.3, pp.166-223, 1970.
DOI : 10.1007/BF00272241

M. J. Worswick and R. J. Pick, Void growth and constitutive softening in a periodically voided solid, Journal of the Mechanics and Physics of Solids, vol.38, issue.5, pp.601-625, 1990.
DOI : 10.1016/0022-5096(90)90025-Y

L. Xue, Damage accumulation and fracture initiation in uncracked ductile solids subject to triaxial loading, International Journal of Solids and Structures, vol.44, issue.16, pp.5163-5181, 2007.
DOI : 10.1016/j.ijsolstr.2006.12.026

L. Xue and T. Wierzbicki, Ductile fracture initiation and propagation modeling using damage plasticity theory, Engineering Fracture Mechanics, vol.75, issue.11, pp.3276-3293, 2008.
DOI : 10.1016/j.engfracmech.2007.08.012

H. Yamamoto, Conditions for shear localization in the ductile fracture of void-containing materials, International Journal of Fracture, vol.5, issue.4, pp.347-365, 1978.
DOI : 10.1007/BF00015989

K. S. Zhang, J. B. Bai, and D. Francois, Numerical analysis of the influence of the Lode parameter on void growth, International Journal of Solids and Structures, vol.38, issue.32-33, pp.32-33, 2001.
DOI : 10.1016/S0020-7683(00)00391-7

Z. L. Zhang, Explicit consistent tangent moduli with a return mapping algorithm for pressure-dependent elastoplasticity models, Computer Methods in Applied Mechanics and Engineering, vol.121, issue.1-4, pp.1-4, 1995.
DOI : 10.1016/0045-7825(94)00707-T

Z. L. Zhang, On the accuracies of numerical integration algorithms for Gurson-based pressure-dependent elastoplastic constitutive models, Computer Methods in Applied Mechanics and Engineering, vol.121, issue.1-4, pp.1-4, 1995.
DOI : 10.1016/0045-7825(94)00706-S

Z. L. Zhang, M. Hauge, and C. Thaulow, Two-parameter characterization of the near-tip stress fields for a bi-material elastic-plastic interface crack, International Journal of Fracture, vol.21, issue.1, pp.65-83, 1996.
DOI : 10.1007/BF00017713

Z. L. Zhang and E. Niemi, ANALYZING DUCTILE FRACTURE USING DUAL DILATIONAL CONSTITUTIVE EQUATIONS, Fatigue & Fracture of Engineering Materials and Structures, vol.207, issue.6, pp.695-707, 1994.
DOI : 10.1016/0029-5493(87)90235-4

Z. L. Zhang and E. Niemi, A class of generalized mid-point algorithms for the Gurson-Tvergaard material model, International Journal for Numerical Methods in Engineering, vol.31, issue.12, pp.2033-2053, 1995.
DOI : 10.1002/nme.1620381206

Z. L. Zhang and E. Niemi, A new failure criterion for the Gurson-Tvergaard dilational constitutive model, International Journal of Fracture, vol.17, issue.4, pp.321-334, 1995.
DOI : 10.1007/BF00032450

Z. L. Zhang, C. Thaulow, and M. Hauge, Effects of crack size and weld metal mismatch on the has cleavage toughness of wide plates, Engineering Fracture Mechanics, vol.57, issue.6, pp.653-664, 1997.
DOI : 10.1016/S0013-7944(97)00053-2

Z. L. Zhang, C. Thaulow, and J. Ødega?rdødega?rd, A complete Gurson model approach for ductile fracture, Engineering Fracture Mechanics, vol.67, issue.2, pp.155-168, 2000.
DOI : 10.1016/S0013-7944(00)00055-2