ON THE CORROSION RESISTANCE OF POROUS ELECTROPLATED ZINC COATINGS IN DIFFERENT CORROSIVE MEDIA

Youcef Hamlaoui (1, 2) , Lakhdar Tifouti (3) , Fernando Pedraza (1)

1 LEMMA - Laboratoire d'Etude des Matériaux en Milieux Agressifs
2 Institut des Sciences et Sciences de l'Ingénieur
3 LGE - Laboratoire de Génie de l'Environnement

The corrosion resistance of an electroplated (EP) Zn coating whose surface was chemically etched to produce surface defects (pores) is investigated in this work. Impedance and DC polarisation measururements were employed to study the behaviour of such coating in various corrosive media (NaCl, NaOH and rain water). Four different faradaic relaxation processes were clearly revealed in different NaCl concentrations (from 0.1M to 1M). In the most concentrated solutions at least three relaxation processes at low frequencies (LF) appeared and were related to zinc deposition and dissolution. At lower concentrations and depending on the pH, only one process was observed. The charge transfer resistance (Rct) and the corrosion current (Icorr) were practically stable in the pH range 5 to 10. In deaerated NaCl 0.1M, the EIS diagrams showed two time-constants at very close frequencies. From the EIS diagrams the porous nature of the coating was highlighted and showed that the dissolution mechanisms occurred at the base of the pores.

Mots clés: Electrochemical impedance spectroscopy; electroplated zinc coating; pores; corrosion

Domaines: Matériaux; Science des matériaux [cond-mat.mtrl-sci]; Matériaux; Chimie théorique et/ou physique

Youcef Hamlaoui, Lakhdar Tifouti, Fernando Pedraza. ON THE CORROSION RESISTANCE OF POROUS ELECTROPLATED ZINC COATINGS IN DIFFERENT CORROSIVE MEDIA. Corrosion Science, 2010, 52 (2), pp.1883-1888. ⟨10.1016/j.corsci.2010.02.024⟩. ⟨hal-00487661⟩