An overview of robot calibration, IEEE Journal on Robotics and Automation, vol.3, issue.5, p.3777385, 1987. ,
DOI : 10.1109/JRA.1987.1087124
Compensation of positioning errors caused by geometric deviations in robot system, 2nd Int. Symposium of Robotics Research, p.2311236, 1984. ,
Industrial Robot Forward Calibration Method and Results, Journal of Dynamic Systems, Measurement, and Control, vol.108, issue.1, p.118, 1986. ,
DOI : 10.1115/1.3143737
A review of kinematic calibration, The Robotics Review, vol.1, p.2077242, 1989. ,
Autonomous calibration of singleloop closed kinematic chains formed by manipulators with passive endpoint constraints, IEEE Trans. Robotics and Automation, vol.7, issue.5, p.5977606, 1991. ,
A Single-Point Calibration Technique for a Six Degree-of-Freedom Articulated Arm, The International Journal of Robotics Research, vol.3, issue.1, p.1899199, 1994. ,
DOI : 10.1177/027836499401300301
Calibration of the geometric parameters of robots without external sensors, Proceedings of 1995 IEEE International Conference on Robotics and Automation, p.303993044, 1995. ,
DOI : 10.1109/ROBOT.1995.525716
Robot autonomous error calibration method for off line programming system, Proceedings of 1995 IEEE International Conference on Robotics and Automation, p.177551783, 1995. ,
DOI : 10.1109/ROBOT.1995.525528
A new method for autonomous robot calibration, Proc. IEEE Int. Conf. on Robotics and Automation, p.179001795, 1995. ,
Autonomous calibration of robots using planar points, Proc. 6th Int. Symp. on Robotics and Manufacturing, WAC'96, p.3833388, 1996. ,
URL : https://hal.archives-ouvertes.fr/hal-00362605
Kinematic calibration using a plane constraint, Proceedings of International Conference on Robotics and Automation, p.319113196, 1997. ,
DOI : 10.1109/ROBOT.1997.606774
D'eveloppement et mise en oeuvre de m ethodologies d' etalonnage de robots manipulateurs industriels, doctoral diss, 1996. ,
A study of three robot calibration methods based on flat surfaces, Mechanism and Machine Theory, 1994. ,
A new geometric notation for open and closed-loop robots, Proceedings. 1986 IEEE International Conference on Robotics and Automation, p.117441180, 1986. ,
DOI : 10.1109/ROBOT.1986.1087552
Mod elisation identiication et commande des robots, Hermes, 1999. ,
Identifiable Parameters and Optimum Configurations for Robots Calibration, Robotica, vol.108, issue.01, p.63370, 1991. ,
DOI : 10.1109/JRA.1987.1087124
Robot arm geometric link calibration, Proc. IEEE Conf. Decision and Control, p.7988800, 1988. ,
DOI : 10.1109/cdc.1983.269783
An implicit loop method for kinematic calibration and its application to closedchain mechanisms, IEEE Trans. on Robotics and Automation, vol.2, issue.5, p.7100724, 1988. ,
The calibration index and taxonomy of kinematic calibration methods, Calculation of the identifiable parameters for robots calibration, 9th IFAC/IFORS Symp. on Identiication and System Parameter Estimation, p.8888892, 1991. ,
Determination of Optimal Measurement Configurations for Robot Calibration Based on Observability Measure, The International Journal of Robotics Research, vol.3, issue.5, p.51163, 1991. ,
DOI : 10.1177/027836499101000106
Closed-loop kinematic calibration of the RSI 6-DOF hand controller, IEEE Trans. on Robotics and Automation, vol.11, p.3522359, 1995. ,
Kinematic modeling for robot calibration, Proc. IEEE Int. Conf. on Robotics and Automation, p.1833189, 1987. ,
DOI : 10.1109/robot.1987.1087818
Identifying robot parameters using partial pose information, IEEE Control Systems, vol.13, issue.5, p.6614, 1983. ,
DOI : 10.1109/37.236317
Solving least squares problems, 1974. ,
DOI : 10.1137/1.9781611971217