Which Hydraulic Model To Use In Vertical Flow Constructed Wetlands?

A. Morvannou (1) , N. Forquet (1) , M. Vanclooster (2) , Pascal Molle (1)

1 UR MALY - Milieux aquatiques, écologie et pollutions
2 UCL - Université Catholique de Louvain = Catholic University of Louvain

Modeling water flow in a VFCW is a prerequisite to model wastewater treatment using process based filtering models. As for soils, when the vertical structure varies in different material types, it has a significant impact on water flow passing through it. The heterogeneous filtering material is composed of a mix of mineral porous material, and organic matter which makes its hydraulic characterization a difficult task. Indeed, the porosity may serve as preferential flow paths through which water can bypass most of the soil porous matrix in a largely unpredictable way. Consequently, non-equilibrium conditions in pressure heads are created between preferential flow paths and the soil matrix pore region. Preferential flows limit the applicability of standard models for water flow that are commonly based on Richards’ equation. Even if it is possible to simulate water content variations within a VFCW, we can not correctly model outflow with the standard van Genuchten-Mualem function. A number of various model approaches have been proposed to overcome this problem. These models mostly try to separately describe flow and transport in preferred flow paths and slow or stagnant pore regions. The objective of this study was to compare the various existing models simulating the preferential flows within the French VFCWs. Moreover, by assuming that several layers hydraulically different compose the VFCW, we tested at which layer(s) it is necessary to apply the non-equilibrium models. A tracer experiment was performed to evaluate the non-equilibrium degree. It was conducted on a 100 p.e. plant in operation since 2004. Monitoring consisted in measuring inlet and outlet flows, infiltration rates and water content at a time interval of 1 minute. We used the HYDRUS-1D software package containing various non-equilibrium flow modeling approaches. The physical non-equilibrium transport models were used to simulate outflow, the tracer breakthrough curve as well as water contents within a French-type VFCW. Physical non-equilibrium models include the dual-porosity model (mobile-immobile water model, with water content mass transfer or head mass transfer), and the dual-permeability model (matrix and fracture pore regions). We also applied a bimodal single-domain approach (Durner model) in order to see if it is actually necessary to use non-equilibrium models to effectively simulate VFCW outflow. Performance of the various non-equilibrium models (accuracy and limitation) was assessed by comparing the simulated and measured tracer fluxes using the mean square relative error (MSRE) of prediction. The comparison between measured and simulated tracer breakthrough curves indicates that the non-equilibrium (dual-porosity or dual-permeability model) approach seem to be the most appropriate for simulating preferential flow paths. In addition, simulations reveal that all layers participate in the preferential flow path process. These preferential flow paths are mainly due to the sludge layer that has been developed on the surface of VFCW since its start-up (swelling/shrinking during the feeding/rest periods) and to the network of roots and rhizomes present in it.

Mots clés: MODELISATION; HYDRAULIQUE; FILTRE PLANTE DE ROSEAUX; FLUX VERTICAL

Domaines: Sciences de l'environnement

A. Morvannou, N. Forquet, M. Vanclooster, Pascal Molle. Which Hydraulic Model To Use In Vertical Flow Constructed Wetlands?. 13th International Conference on Wetland Systems for Water Pollution Control, Nov 2012, Perth, Australia. 9 p. ⟨hal-00783728⟩