A review on energy saving strategies in industrial sector, Renew. Sustain. Energy Rev, vol.15, pp.150-168, 2011. ,
Environmentally-friendly product development, 2005. ,
Holistic Simulation Environment for Energy Consumption Prediction of Machine Tools, Procedia CIRP, The 22nd CIRP Conference on Life Cycle Engineering, vol.29, pp.251-256, 2015. ,
Evaluation of Methods Used for Life-cycle Assessments in Discrete Event Simulation, Proceedings of the Winter Simulation Conference, WSC '12. Winter Simulation Conference, vol.156, p.12, 2012. ,
Energy Efficiency of Manufacturing Processes: A Critical Review, Procedia CIRP, Forty Sixth CIRP Conference on Manufacturing Systems, vol.7, pp.628-633, 2013. ,
The energy scheduling problem: Industrial case-study and constraint propagation techniques, Int. J. Prod. Econ, vol.143, pp.13-23, 2013. ,
URL : https://hal.archives-ouvertes.fr/hal-00522387
Guidelines for successful simulation studies, Winter Simulation Conference Proceedings. Presented at the 1990 Winter Simulation Conference Proceedings, pp.25-32, 1990. ,
Discrete-Event System Simulation, 2010. ,
APICS dictionary : the official dictionary of production and inventory management terminology and phrases, 2008. ,
Integrating energy efficiency performance in production management -gap analysis between industrial needs and scientific literature, J. Clean. Prod, vol.19, pp.667-679, 2011. ,
Evaluating the barriers to specific industrial energy efficiency measures: an exploratory study in small and medium-sized enterprises, J. Clean. Prod, vol.82, pp.70-83, 2014. ,
Sustainability analysis of complex dynamic systems using embodied energy flows: The eco-bond graphs modeling and simulation framework, J. Comput. Sci, vol.10, pp.108-125, 2015. ,
Modelling, simulation and evaluation of energy consumptions for a manufacturing production line, IECON 2013-39th Annual Conference of the IEEE, pp.7537-7542, 2013. ,
On-Line Simulation: Need and Evolving Research Requirements, Handbook of Simulation, pp.465-516, 1998. ,
Energy Efficiency Improvements in Electric Motors and Drives, 1997. ,
Improvement Potential for Energy Consumption in Discrete Part Production Machines, Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses, pp.311-316, 2007. ,
A generic energy consumption model for decision making and energy efficiency optimisation in manufacturing, Int. J. Sustain. Eng, vol.2, pp.123-133, 2009. ,
, DIRECTIVE/87/CE, 2003. DIRECTIVE 2003/87/CE DU PARLEMENT EUROPÉEN ET DU CONSEIL du 13 octobre 2003 établissant un système d'échange de quotas d'émission de gaz à effet de serre dans la Communauté et modifiant la directive 96/61/CE du Conseil
Modélisation Bottom-Up, un outil d'aide à la décision long terme pour les mesures politiques en matière d'énergie et d'environnement -Le modèle TIMES appliqué aux industries grandes consommatrices d'énergie (IGCE), 2009. ,
Department Of Comerce, 2010. ,
Towards energy and resource efficient manufacturing: A processes and systems approach, CIRP Ann. -Manuf. Technol, vol.61, pp.587-609, 2012. ,
The triple bottom line, 2002. ,
Development overview of sustainable manufacturing metrics, Proceedings of the 17th CIRP International Conference on Life Cycle Engineering, 2010. ,
Greedy Randomized Adaptive Search Procedures, J. Glob. Optim, vol.6, pp.109-133, 1995. ,
Energy Efficient Control Strategy for Machine Tools with Stochastic Arrivals and Time Dependent Warm-up, Procedia CIRP, 21st CIRP Conference on Life Cycle Engineering, vol.15, pp.56-61, 2014. ,
An Empirical Study of the Energy Consumption in Automotive Assembly, Procedia CIRP, 45th CIRP Conference on Manufacturing Systems, vol.3, pp.477-482, 2012. ,
, , 2014.
Discrete Event Simulation Inserted into Kaizen Event to Assess Energy Efficiency, in: Re-Engineering Manufacturing for Sustainability, pp.499-503, 2013. ,
Electrical energy requirements for manufacturing processes, 13th CIRP International Conference on Life Cycle Engineering, pp.623-638, 2006. ,
Barriers to energy efficiency improvement and decision-making behavior in Thai industry, Energy Effic, vol.3, pp.33-52, 2010. ,
From Life Cycle Assessment to Sustainable Production: Status and Perspectives, CIRP Ann. -Manuf. Technol, vol.54, pp.1-21, 2005. ,
Simulation-based sustainable manufacturing system design, Presented at the Simulation Conference, pp.1922-1930, 2008. ,
Sustainability in manufacturing and factories of the future, Int. J. Precis. Eng. Manuf.-Green Technol, vol.1, pp.283-292, 2014. ,
Process chain simulation to foster energy efficiency in manufacturing, CIRP J. Manuf. Sci. Technol, vol.1, pp.221-229, 2009. ,
Process chain simulation to foster energy efficiency in manufacturing, CIRP J. Manuf. Sci. Technol, vol.1, pp.221-229, 2009. ,
, Tracking Industrial Energy Efficiency and CO2 Emissions, The International Energy Agency (IEA), IEA, 2007.
, IEO, 2016.
Is an environmental management system able to influence environmental and competitive performance? The case of the eco-management and audit scheme (EMAS) in the European union, J. Clean. Prod, vol.17, pp.1444-1452, 2009. ,
, Systèmes de management de la qualité --Principes essentiels et vocabulaire. ISO 14040, ISO, vol.9000, 2005.
, Management environnemental --Analyse du cycle de vie --Exigences et lignes directrices, ISO 14044, 2006.
, Systèmes de management de l'énergie --Exigences et recommandations de mise en oeuvre, ISO, vol.50001, 2011.
Energy policy: economic effects, security aspects and environmental issues, 2009. ,
Simulation in manufacturing and business: A review, Eur. J. Oper. Res, vol.203, pp.1-13, 2010. ,
Categorization of indicators for sustainable manufacturing, Ecol. Indic, vol.24, pp.148-157, 2013. ,
All electric injection molding machines: how much energy can you save?, 2008. ,
Towards the energy efficient future factory, in: Industrial Informatics, 7th IEEE International Conference on. IEEE, pp.367-371, 2009. ,
Methodology for systematic analysis and improvement of manufacturing unit process life-cycle inventory (UPLCI)-CO2PE! initiative (cooperative effort on process emissions in manufacturing). Part 1: Methodology description, Int. J. Life Cycle Assess, vol.17, pp.69-78, 2011. ,
Methodology for systematic analysis and improvement of manufacturing unit process life cycle inventory (UPLCI) CO2PE! initiative (cooperative effort on process emissions in manufacturing). Part 2: case studies, Int. J. Life Cycle Assess, vol.17, pp.242-251, 2011. ,
Job-shop like manufacturing system with variable power threshold and operations with power requirements, Int. J. Prod. Res, vol.0, pp.1-22, 2017. ,
A system dynamics modeling framework for sustainable manufacturing, Proceedings of the 27th Annual System Dynamics Society Conference, 2009. ,
Discrete event simulation of individual energy consumption for product-varieties, Procedia CIRP, vol.17, pp.517-522, 2014. ,
Input data management for energy related discrete event simulation modelling, J. Clean. Prod, vol.141, pp.194-207, 2017. ,
URL : https://hal.archives-ouvertes.fr/hal-01628883
An energy-related discrete event simulation approach, 2015. ,
Couplage de la modélisation énergétique à la simulation dynamique des flux de production, Xème Conférence Internationale: Conception et Production Intégrées. Presented at the CPI, 2015. ,
A Simulation-based Framework for Improving the Ecological and Economic Transparency in Multi-variant Production, Procedia CIRP, 12th Global Conference on Sustainable Manufacturing -Emerging Potentials, vol.26, pp.179-184, 2015. ,
Simulation-based assessment and optimization of the energy consumption in multi variant production, in: Decoupling Growth from Resource Use, Proceedings 13th Global Conference on Sustainable Manufacturing, p.6, 2015. ,
A Model-based Approach to Energy-saving Manufacturing Control Strategies, Procedia CIRP, 21st CIRP Conference on Life Cycle Engineering, vol.15, pp.123-128, 2014. ,
Simulation Modeling and Analysis, 2007. ,
Simulation Modelling and Analysis, troisième édition, 2000. ,
MAS2: an integrated modeling and simulation-based life cycle evaluation approach for sustainable manufacturing, J. Clean. Prod, vol.66, pp.146-163, 2014. ,
An empirical model for predicting energy consumption of manufacturing processes: a case of turning process, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf, vol.225, pp.1636-1646, 2011. ,
Developing Unit Process Models for Predicting Energy Consumption in Industry: A Case of Extrusion Line, in: Re-Engineering Manufacturing for Sustainability, pp.147-152, 2013. ,
An Investigation into Fixed Energy Consumption of Machine Tools, in: Glocalized Solutions for Sustainability in Manufacturing, pp.268-273, 2011. ,
A method for predicting the energy consumption of the main driving system of a machine tool in a machining process, J. Clean. Prod, vol.105, pp.171-177, 2014. ,
A Hybrid Approach to Energy Consumption Modelling based on Cutting Power: A Milling Case, J. Clean. Prod, vol.104, pp.264-272, 2015. ,
Simulation and optimization of robot driven production systems for peak-load reduction, Proceedings of the 2012 Winter Simulation Conference (WSC). Presented at the Proceedings of the 2012 Winter Simulation Conference (WSC), pp.1-12, 2012. ,
Energy performance evaluation and improvement of unit-manufacturing processes: injection molding case study, J. Clean. Prod, vol.105, pp.157-170, 2015. ,
Emerging energy-efficient industrial technologies, 2000. ,
Efficiency trends in electric machines and drives, Energy Policy, Foresight Sustainable Energy Management and the Built Environment Project, vol.36, pp.4336-4341, 2008. ,
La transition énergétique du secteur de l'industrie : Un plan d'action : comment financer l'exploitation des gisements d'efficacité énergétique du secteur ?, 2014. ,
Engineering statistics, 2007. ,
Adopting Corporate Environmental Management Systems: Eur. Manag, J, vol.20, pp.159-171, 2002. ,
Interactions of a tradable green certificate market with a tradable permits market, Energy Policy, vol.29, pp.133-139, 2001. ,
Energy use efficiency in U.S. manufacturing: A nonparametric analysis, Energy Econ, vol.30, pp.76-96, 2008. ,
Improvement of Injection Moulding Processes by Using Dual Energy Signatures. Procedia CIRP, Variety Management in Manufacturing, vol.17, pp.704-709, 2014. ,
Finding the connection: environmental management systems and environmental performance, J. Clean. Prod, vol.17, pp.601-607, 2009. ,
Simulation for manufacturing system design and operation: Literature review and analysis, J. Manuf. Syst, vol.33, pp.241-261, 2014. ,
Steps for Proper Simulation Project Management, Proceedings of the 27th Conference on Winter Simulation, WSC '95, pp.68-73, 1995. ,
, Energy management. Appl. Energy, vol.3, pp.127-138, 1977.
Advances in environmental informatics: integration of discrete event simulation methodology with ecological material flow analysis for modelling eco-efficient systems, Procedia Environ. Sci, vol.2, pp.696-705, 2010. ,
Introduction to Simulation Using SIMAN, 1995. ,
A novel energy demand modelling approach for CNC machining based on function blocks, J. Manuf. Syst, vol.33, pp.196-208, 2014. ,
Exploring the impact of energy efficiency technologies on manufacturing firm performance, J. Clean. Prod, vol.52, pp.134-144, 2013. ,
International industrial sector energy efficiency policies, 2000. ,
A GRASP × Evolutionary Local Search Hybrid for the Vehicle Routing Problem, in: Bio-Inspired Algorithms for the Vehicle Routing Problem, Studies in Computational Intelligence, pp.35-53, 2009. ,
Target Systems and Decision-making to Increase Production Sustainability, Procedia CIRP, The 23rd CIRP Conference on Life Cycle Engineering, vol.48, pp.34-39, 2016. ,
Unit process energy consumption models for material addition processes: a case of the injection molding process, Leveraging Technology for a Sustainable World, pp.269-274, 2012. ,
Modélisation par la méthode des plans d'expériences du comportement dynamique d'un module IGBT utilisé en traction ferroviaire, 2007. ,
Minimising Embodied Product Energy to support energy efficient manufacturing, CIRP Ann. -Manuf. Technol, vol.59, pp.25-28, 2010. ,
Assessment of energy consumption in injection moulding process, Leveraging Technology for a Sustainable World, pp.263-268, 2012. ,
Barriers to and driving forces for energy efficiency in the nonenergy intensive manufacturing industry in Sweden, Energy, vol.31, pp.1836-1844, 2006. ,
Barriers to and drivers for energy efficiency in the Swedish foundry industry, Energy Policy, vol.35, pp.672-677, 2007. ,
End-use energy analysis in the Malaysian industrial sector, Energy, vol.34, pp.153-158, 2009. ,
Sustainable Manufacturing Indicator Repository 943-950, 2011. ,
A methodology for customized prediction of energy consumption in manufacturing industries, Int J Precis Eng Manuf-Green Tech, vol.2, pp.163-172, 2015. ,
A framework for modelling energy consumption within manufacturing systems, CIRP J. Manuf. Sci. Technol., Production Networks Sustainability, vol.4, pp.258-264, 2011. ,
An overview of sustainability assessment methodologies, Ecol. Indic, vol.9, pp.189-212, 2009. ,
Mapping of time-consumption during input data management activities, Simul. News Eur, vol.19, pp.39-46, 2009. ,
Data requirements and representation for simulation of energy consumption in production systems, Proceedings of the 44th CIRP Conference on Manufacturing Systems, pp.1-3, 2011. ,
Survey on the use of simulation for manufacturing system design and operation, J. Manuf. Syst, vol.22, pp.157-171, 2003. ,
Applying Energy Aspects on Simulation of Energy-intensive Production Systems, Proceedings of the 37th Conference on Winter Simulation, WSC '05. Winter Simulation Conference, pp.1428-1432, 2005. ,
Increased energy efficiency in a Swedish iron foundry through use of discrete event simulation, Simulation Conference, 2006. WSC 06. Proceedings of the Winter, pp.1971-1976, 2006. ,
Energy efficiency benchmarking for injection moulding processes, Robot. Comput.-Integr. Manuf, vol.36, pp.45-59, 2015. ,
Best Practices and Case Studies for Industrial Energy Efficiency Improvement -An Introduction for Policy Makers, 2016. ,
The Global Risks Report, 2016. ,
A systematic method for increasing the energy and resource efficiency in manufacturing companies, Procedia CIRP, vol.2, pp.28-33, 2012. ,
State of Research and an innovative Approach for simulating Energy Flows of Manufacturing Systems, in: Glocalized Solutions for Sustainability in Manufacturing, pp.335-340, 2011. ,
Environmental aspects in manufacturing system modelling and simulation-State of the art and research perspectives, CIRP J. Manuf. Sci. Technol, vol.6, pp.78-87, 2013. ,
An Environmental Analysis of Injection Molding, Presented at the Proceedings of the 2006 IEEE International Symposium on Electronics and the Environment, pp.195-200, 2006. ,
Introduction to Bond Graphs and their Applications, 2016. ,
Saving energy with variable speed drives, World Pumps, pp.32-33, 2008. ,
Assessment of mathematical programming and agentbased modelling for off-line scheduling: Application to energy aware manufacturing, CIRP Ann. -Manuf. Technol, vol.65, pp.405-408, 2016. ,
Humans, Information and Technology. Presented at the, IEEE International Conference on Systems, Man, and Cybernetics, 1994. Humans, Information and Technology, vol.1, pp.209-214, 1994. ,
Impacts of a common green certificate market on electricity and CO2-emission markets in the Nordic countries, Energy Policy, vol.33, pp.2152-2163, 2005. ,
Automated energy monitoring of machine tools, CIRP Ann. -Manuf. Technol, vol.59, pp.21-24, 2010. ,
An advanced energy management framework to promote energy awareness, J. Clean. Prod, vol.43, pp.103-112, 2013. ,
World Commission on Environment and Development report, 1987. ,
Methodology for planning and operating energyefficient production systems, CIRP Ann. -Manuf. Technol, vol.60, pp.41-44, 2011. ,
Investigation of Advanced Energy Saving Stand by Strategies for Production Systems, Procedia CIRP, 21st CIRP Conference on Life Cycle Engineering, vol.15, pp.90-95, 2014. ,
Evolutionary Local Search for the Super-Peer Selection Problem and the p-Hub Median Problem, Hybrid Metaheuristics, Lecture Notes in Computer Science. Presented at the International Workshop on Hybrid Metaheuristics, pp.1-15, 2007. ,
Modélisation et simulation des systèmes de production : une approche orientée objets, 2013. ,
Towards a framework for energyaware information systems in manufacturing, Comput. Ind., ICT for Sustainability in Industry, vol.65, pp.419-433, 2014. ,
Energy consumption model and energy efficiency of machine tools: a comprehensive literature review, J. Clean. Prod, vol.112, pp.3721-3734, 2016. ,
An energy-consumption model for establishing energyconsumption allowance of a workpiece in a machining system, J. Clean. Prod, vol.135, pp.1580-1590, 2015. ,