P. Trontin and P. Villedieu, Revisited model for supercooled large droplet impact onto a solid surface, J. of Aircraft, vol.54, issue.3, pp.1189-1204, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01835500

P. Villedieu, P. Trontin, D. Guffond, and D. Bobo, SLD Lagrangian modeling and capability assessment in the frame of onera 3D icing suite, th AIAA Atmospheric and Space Environments Conference

P. Villedieu, P. Berthoumieu, and . Trontin, Experimental investigation and numerical modelling of SLD impact phenomena, SAE International conference on icing of aircraft, engines, and structures, 2015.

P. Trontin and P. Villedieu, A new model for the sticking efficiency of supercooled large droplets (SLD) impacting onto a solid wall, 2016.

P. Trontin and P. Villedieu, A revisited model for SLD impact onto a solid surface, 8th AIAA Atmospheric and Space Environments Conference, pp.13-17, 2016.

T. Xavier, D. Zuzio, P. Trontin, and J. L. Estivalezes, Direct numerical simulation of drop impacts on a solid surface, Euromech Colloquium, vol.9, issue.11, 2018.

, Certification Specifications and Acceptable Means of Compliance for Large Aeroplanes CS-25. Amendment 17, 2015.

B. L. Messinger, Equilibrium temperature of an unheated icing surface as a function of air speed, Journal of the aerospace sciences, vol.20, p.29, 1953.

P. Trontin, A. Kontogiannis, G. Blanchard, and P. Villedieu, Description and assessment of the new ONERA 2D icing suite IGLOO2D, 9th AIAA Atmospheric and Space Environments Conference, pp.5-9, 2017.

A. Baumert, S. Bansmer, P. Trontin, and P. Villedieu, Experimental and numerical investigations on aircraft icing at mixed phase conditions, Int. J. Heat Mass Transfer, vol.123, pp.957-978, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01858313

J. Cousteix, Aérodynamique : turbulence et couche limite. Cepadues-éditions, 1989.

V. Bodoc, P. Berthoumieu, T. Xavier, D. Zuzio, and P. Trontin, Projet PHYSICE 2 -Rapport de synthèse final des travaux du lot 2, ONERA, 2018.

C. Josserand and S. T. Thoroddsen, Drop impact on a solid surface, Annual Review of Fluid Mechanics, vol.48, pp.365-391, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01398138

A. L. Yarin, I. V. Roisman, and C. Tropea, Collision phenomena in liquids and solids, 2017.

M. Schremb, S. Borchert, E. Berberovic, S. Jakirlic, I. V. Roisman et al., Computational modelling of flow and conjugate heat transfer of a drop impacting onto a cold wall, Int. J. of Heat and Mass Transfer, vol.109, pp.971-980, 2017.

M. Pasandideh-fard, R. Bhola, S. Chandra, and J. Mostaghimi, Deposition of tin droplets on a steel plate: simulations and experiments, Int. J. of Heat and Mass Transfer, vol.41, issue.19, pp.2929-2945, 1998.

I. V. Roisman, Fast forced liquid film spreading on a substrate: flow, heat transfer and phase transition, J. of Fluid Mech, vol.656, pp.189-204, 2010.

M. Schremb, I. V. Roisman, and C. Tropea, Transient effects in ice nucleation of a water drop impacting onto a cold substrate, Phys. Rev. E, vol.95, issue.2, p.22805, 2017.

M. Schremb, J. M. Campbell, H. K. Christenson, and C. Tropea, Ice layer spreading along a solid substrate during solidification of supercooled water: Experiments and modeling, Langmuir, vol.33, issue.19, pp.4870-4877, 2017.

M. Schremb, I. V. Roisman, and C. Tropea, Normal impact of supercooled water drops onto a smooth ice surface: experiments and modelling, J. of Fluid Mechanics, vol.835, pp.1087-1107, 2018.

M. Papadakis, Experimental investigation of water droplet impingement on airfoils, finite wings, and an S-duct engine inlet. NASA, 2002.

M. Papadakis, A. Rachman, S. C. Wong, H. W. Yeong, K. E. Hung et al., Water droplet impingement on simulated glaze, mixed, and rime ice accretions, 2007.

M. Papadakis, S. Wong, A. Rachman, E. Kuohsing, . Hung et al., Large and small droplet impingement data on airfoils and two simulated ice shapes, 2007.

M. Papadakis, A. Rachman, S. C. Wong, H. W. Yeong, K. Hung et al., Water impingement experiments on a naca 23012 airfoil with simulated glaze ice shapes, 2004.

C. Bai and A. D. Gosman, Development of methodology for spray impingement simulation, SAE Technical Paper, 1995.

M. F. Trujillo, W. S. Mathews, C. F. Lee, and J. E. Peters, Modelling and experiment of impingement and atomization of a liquid spray on a wall, Int. J. of Engine Research, vol.1, issue.1, pp.87-105, 2000.

C. H. Mundo, M. Sommerfeld, and C. Tropea, Droplet-wall collisions: experimental studies of the deformation and breakup process, Int. J. of Mult. flow, vol.21, issue.2, pp.151-173, 1995.

C. H. Mundo, M. Sommerfeld, and C. Tropea, On the modeling of liquid sprays impinging on surfaces, Atomization and Sprays, vol.8, issue.6, 1998.

A. L. Yarin and D. A. Weiss, Impact of drops on solid surfaces: self-similar capillary waves, and splashing as a new type of kinematic discontinuity, Journal of Fluid Mechanics, vol.283, pp.141-173, 1995.

W. B. Wright, Validation results for lewice 3.0, 43rd AIAA Aerospace Sciences Meeting and Exhibit, 2005.

W. B. Wright, Further refinement of the lewice SLD model, 44rd AIAA Aerospace Sciences Meeting and Exhibit, 2006.

R. Honsek and W. G. Habashi, Fensap-ice: Eulerian modeling o fdroplet impingement in the SLD regime of aircrafticing, 2006.

R. Honsek, W. G. Habashi, and M. S. Aubé, Eulerian modeling of in-flight icing due to supercooled large droplets, J. of aircraft, vol.45, issue.4, pp.1290-1296, 2008.

J. Hospers and H. W. Hoeijmakers, Numerical simulation of SLD ice accretions, SAE Technical Paper, 2011.

F. Dezitter, Onice2d and drop3d SLD capability assessment, 2011.

N. Rosa, P. Villedieu, J. Dewitte, and G. Lavergne, A new droplet-wall interaction model, Proceedings of the 10th International Conference on Liquid Atomization and Spray System, 2006.

A. Murrone and P. Villedieu, Numerical modeling of dispersed two-phase flows, Aerospace Lab, vol.2, issue.2, pp.1-13, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01181241

C. Wang, S. Chang, M. Leng, H. Wu, and B. Yang, A two-dimensional splashing model for investigating impingement characteristics of supercooled large droplets, Int. J. of Mult. Flow, vol.80, pp.131-149, 2016.

E. Norde, J. M. Hospers, E. T. Van-der-weide, and H. W. Hoeijmakers, Splashing model for impact of supercooled large droplets on a thin liquid film, 2013.

P. Berthoumieu, Projet PHYSICE -D2.1 -Etude expérimentale de l'impact de SLD, ONERA, 2015.

B. Aupoix, P. Berthoumieu, C. Bayeux, D. Donjat, F. Micheli et al., ONERA, 2016.

P. Villedieu, E. Radenac, P. Berthoumieu, P. Trontin, J. Lallement et al., Projet PHYSICE2 -Synthèse des travaux, ONERA, 2016.

P. Berthoumieu, F. Chedevergne, A. Gosset, J. Lallement, O. Leon et al., Projet PHYSICE2 -Synthèse des travaux 2017, 2017.

K. Yokoi, D. Vadillo, J. Hinch, and I. Hutchings, Numerical studies of the influence of the dynamic contact angle on a droplet impacting on a dry surface, Phys. of Fluids, vol.21, issue.7, p.72102, 2009.

G. E. Cossali, M. Marengo, A. Coghe, and S. Zhdanov, The role of time in single drop splash on thin film, Exp. in Fluids, vol.36, issue.6, pp.888-900, 2004.

Y. Guo, Y. Lian, and M. Sussman, Investigation of drop impact on dry and wet surfaces with consideration of surrounding air, Phys. of Fluids, vol.28, issue.7, p.73303, 2016.

T. Hauk, E. Bonaccurso, P. Villedieu, and P. Trontin, Theoretical and experimental investigation of the melting process of ice particles, J. of Thermophysics and Heat Transfer, vol.30, issue.4, pp.946-954, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01413247

E. Norde, J. M. Senoner, E. T. Van-der-weide, P. Trontin, H. W. Hoeijmakers et al., Eulerian and Lagrangian ice crystal trajectory simulations in a generic turbofan compressor, J. Prop. and Power, accepted, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02055824

P. Trontin and P. Villedieu, A comprehensive accretion model for glaciated icing conditions, Int. J. of Mult. Flow. Accepted, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01870916

P. Villedieu, P. Trontin, and R. Chauvin, Glaciated and mixed phase ice accretion modeling using onera 2D icing suite, 6th AIAA Atmospheric and Space Environments Conference, 2014.

P. Trontin, J. M. Senoner, and P. Villedieu, Ice crystal accretion modeling within oneras icing tools, SAE International conference on icing of aircraft, engines, and structures, 2015.

J. G. Mason, J. W. Strapp, and P. Chow, The ice particle threat to engines in flight, 44th AIAA Aerospace Sciences Meeting, 2006.

B. L. Messinger, Equilibrium temperature of an unheated icing surface as a function of air speed, Journal of the aerospace sciences, vol.20, p.29, 1953.

A. J. Heymsfield, A. Bansemer, P. R. Field, S. L. Durden, J. L. Stith et al., Observations and parameterizations of particle size distributions in deep tropical cirrus and stratiform precipitating clouds: Results from in situ observations in TRMM field campaigns, J. of the Atmos. Sciences, vol.59, issue.24, pp.3457-3491, 2002.

A. Haider and O. Levenspiel, Drag coefficient and terminal velocity of spherical and nonspherical particles, Powder technology, vol.58, issue.1, pp.63-70, 1989.

G. H. Ganser, A rational approach to drag prediction of spherical and nonspherical particles, Powder Technology, vol.77, issue.2, pp.143-152, 1993.

A. Hölzer and M. Sommerfeld, New simple correlation formula for the drag coefficient of nonspherical particles, Powder Technology, vol.184, issue.3, pp.361-365, 2008.

M. Widhalm, P. Villedieu, P. Trontin, J. M. Senoner, V. Biasi et al., HAIC Deliverable D63.4 -Synthesis of the TRL4 benchmark on trajectory models, 2017.

R. M. Rasmussen and H. R. Pruppacher, A wind tunnel and theoretical study of the melting behavior of atmospheric ice particles. I: A wind tunnel study of frozen drops of radius < 500µm, J. of the Atm. Sciences, vol.39, issue.1, pp.152-158, 1982.

R. M. Rasmussen, V. Levizzani, and H. Pruppacher, A wind tunnel and theoretical study of the melting behavior of atmospheric ice particles. II: A theoretical study for frozen drops of radius < 500µm, J. of the Atm. Sciences, vol.41, issue.3, pp.374-380, 1984.

R. M. Rasmussen, V. Levizzani, and H. R. Pruppacher, A wind tunnel and theoretical study on the melting behavior of atmospheric ice particles: III. Experiment and theory for spherical ice particles of radius > 500µm, J. of the Atm. Sciences, vol.41, issue.3, pp.381-388, 1984.

T. Matsuo and Y. Sasyo, Empirical formula for the melting rate of snowflakes, J. of the Meteorological Society of Japan. Ser, vol.II, issue.1, pp.1-9, 1981.

T. Matsuo and Y. Sasyo, Melting of snowflakes below freezing level in the atmosphere, J. of the Meteorological Society of Japan. Ser, vol.II, issue.1, pp.10-25, 1981.

N. Fukuta, R. C. Savage, G. J. Donovan, and C. M. Liu, The microphysics of snow crystal and snowflake melting, 1982.

S. K. Mitra, O. Vohl, M. Ahr, and H. R. Pruppacher, A wind tunnel and theoretical study of the melting behavior of atmospheric ice particles. IV: Experiment and theory for snow flakes, J. of the Atm. Sciences, vol.47, issue.5, pp.584-591, 1990.

I. V. Roisman and C. Tropea, Impact of a crushing ice particle onto a dry solid wall, Proc. R. Soc. A, vol.471, p.20150525, 2015.

D. M. Kintea, Hydrodynamics and Thermodynamics of Ice Particle Accretion, 2016.

D. M. Kintea, J. Breitenbach, V. Gurumurthy, I. V. Roisman, and C. Tropea, On the influence of surface tension during the impact of particles on a liquid-gaseous interface, Phys. of Fluids, vol.28, issue.1, p.12108, 2016.

D. M. Kintea, T. Hauk, J. Breitenbach, I. V. Roisman, and C. Tropea, Oblique water entry of rigid spheres, 26th Annual Conference on Liquid Atomization and Spray Systems, 2014.

T. C. Currie, D. M. Fuleki, and A. Mahallati, Experimental studies of mixed-phase sticking efficiency for ice crystal accretion in jet engines, 6th AIAA Atmospheric and Space Environments Conference, 2014.

W. Wright, P. Jorgenson, and J. Veres, Mixed phase modeling in glennice with application to engine icing, AIAA Atmospheric and Space Environments Conference, 2010.

T. C. Currie, D. M. Fuleki, D. C. Knezevici, and J. D. Macleod, Altitude scaling of ice crystal accretion, 5th AIAA Atmospheric and Space Environments Conference, 2013.

T. C. Currie, P. M. Struk, J. C. Tsao, D. M. Fuleki, and D. C. Knezevici, Fundamental study of mixed-phase icing with application to ice crystal accretion in aircraft jet engines, 4th AIAA Atmospheric and Space Environments Conference, 2012.

D. M. Kintea, I. V. Roisman, and C. Tropea, Transport processes in a wet granular ice layer: Model for ice accretion and shedding, Int. J. of Heat and Mass Transfer, vol.97, pp.461-472, 2016.

D. M. Kintea, M. Schremb, I. V. Roisman, and C. Tropea, Numerical investigation of ice particle accretion on heated surfaces with application to aircraft engines, 11th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, 2014.

P. Villedieu, P. Trontin, G. Blanchard, A. V. Kashevarov, A. L. Stasenko et al., Deliverable D65.3 -Final report on the two-layer model, 2016.

T. C. Currie and D. M. Fuleki, Development and application of an impedance-based instrument for measuring the liquid fraction and thickness of ice crystal accretions, SAE 2015 International Conference on Icing of Aircraft, Engines, and Structures, 2015.

K. Al-khalil, E. Irani, and D. Miller, Mixed phase icing simulation and testing at the Cox icing wind tunnel, 41st AIAA Aerospace Sciences Meeting and Exhibit, 2003.

E. P. Lozowski, J. R. Stallabrass, and P. F. Hearty, The icing of an unheated non-rotating cylinder in liquid water droplet-ice crystal clouds, 1979.

J. Cliquet, G. Aouizerate, F. Caminade, E. Ayem, J. P. Pineau et al., Deliverable D66.1 -Final report on model integration in industrial environment incuding basic validation, 2016.

J. Cliquet, G. Aouizerate, F. Caminade, E. Ayem, J. P. Pineau et al., Deliverable D67.1 -Capability assessment: test case definition, 2016.

D. C. Knezevici, D. M. Fuleki, T. C. Currie, and J. D. Macleod, Particle size effects on ice crystal accretion, 4th AIAA Atmospheric and Space Environments Conference, vol.10, pp.6-2012, 2012.

D. C. Knezevici, D. M. Fuleki, T. C. Currie, B. Galeote, J. L. Chalmers et al., Particle size effects on ice crystal accretion-part ii, 5th AIAA Atmospheric and Space Environments Conference, pp.24-27, 2013.

P. Trontin, A. Kontogiannis, G. Blanchard, and P. Villedieu, Description and assessment of the new ONERA 2D icing suite IGLOO2D, 9th AIAA Atmospheric and Space Environments Conference, pp.5-9, 2017.

C. D. Macarthur, J. L. Keller, and L. J. , Numerical simulation of airfoil ice accretion, 20th AIAA Aerospace Sciences Meeting, 1983.

G. A. Ruff and B. M. Berkowitz, Users manual for the NASA Lewis ice accretion prediction code (LEWICE), 1990.

W. B. Wright, Users manual for the improved NASA Lewis ice accretion code LEWICE 1.6, 1995.

J. T. Cansdale and R. W. Gent, Ice accretion on aerofoils in two-dimensional compressible flow-a theoretical model, 1983.

R. W. Gent, TRAJICE2-A combined water droplet trajectory and ice accretion prediction program for aerofoils, Royal Aircraft Establishment TR, p.90054, 1990.

D. Guffond and L. Brunet, Validation du programme bidimensionnel de capitation, 1988.

W. B. Wright, R. W. Gent, and D. Guffond, DRA/NASA/ONERA Collaboration on Icing Research. Part II -Prediction of Airfoil Ice Accretion, 1997.

, Certification Specifications and Acceptable Means of Compliance for Large Aeroplanes CS-25. Amendment 17, 2015.

C. Geuzaine and J. F. Remacle, Gmsh: A 3-D finite element mesh generator with built-in pre-and post-processing facilities, Int. J. for Num. Methods in Engineering, vol.79, issue.11, pp.1309-1331, 2009.

L. , Uber flussigkeits bewegung bei sehr kleiner reibung, Verhaldlg III Int. Math. Kong, pp.484-491, 1904.

B. Aupoix, Couches limites bidimensionnelles compressibles. descriptif et mode d, 1999.

J. Nikuradse, Stromungsgesetze in rauhen rohren: Vdi-forschungschaft 361. Beilage zu Forschung auf dem Gebiete des Ingenieurwesens Ausgabe B, vol.4, 1933.

J. Nikuradse, Laws of flow in rough pipes. National Advisory Committee for Aeronautics Washington, 1950.

B. Aupoix, Revisiting the discrete element method for predictions of flows over rough surfaces, J. of Fluids Eng, vol.138, issue.3, p.31205, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01385460

B. Aupoix, Roughness corrections for the k-? shear stress transport model: Status and proposals, J. of Fluids Eng, vol.137, issue.2, p.21202, 2015.

B. Aupoix, Improved heat transfer predictions on rough surfaces, Int. J. of Heat and Fluid Flow, vol.56, pp.160-171, 2015.

B. Aupoix, A general strategy to extend turbulence models to rough surfaces: Application to smith's k-l model, J. of Fluids Eng, vol.129, issue.10, pp.1245-1254, 2007.

F. Chedevergne and B. Aupoix, Accounting for wall roughness effects in turbulence models: a wall function approach, 7th European Conference for Aeronautics and Aerospace Sciences (EUCASS), pp.2017-372, 2017.

E. Radenac, A. Kontogiannis, C. Bayeux, and P. Villedieu, An extended rough-wall model for an integral boundary layer model intended for ice accretion calculations, 2018 Atmospheric and Space Environments Conference, 2018.

S. T. Mcclain, M. M. Vargas, and J. C. Tsao, Characterization of ice roughness variations in scaled glaze icing conditions, 8th AIAA Atmospheric and Space Environments Conference, 2016.

S. T. Mcclain, D. Reed, M. M. Vargas, R. E. Kreeger, and J. C. Tsao, Ice roughness in short duration SLD icing events, 6th AIAA Atmospheric and Space Environments Conference, 2014.

S. T. Mcclain, M. M. Vargas, R. E. Kreeger, and J. C. Tsao, A reevaluation of appendix C ice roughness using laser scanning, SAE Technical Paper, 2015.

S. T. Mcclain and R. E. Kreeger, Assessment of ice shape roughness using a self-organizing map approach, 5th AIAA Atmospheric and Space Environments Conference, 2013.

S. T. Mcclain, Manual point cloud registration for combined ice roughness and ice thickness measurements, 8th AIAA Atmospheric and Space Environments Conference, 2016.

W. M. Kays and . Crawford, Convective Heat and mass transfer, 1993.

A. Murrone and P. Villedieu, Numerical modeling of dispersed two-phase flows, AerospaceLab, issue.2, p.1, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01181241

P. Villedieu, P. Trontin, D. Guffond, and D. Bobo, SLD Lagrangian modeling and capability assessment in the frame of ONERA 3D icing suite, 4th AIAA Atmospheric and Space Environments Conference, Fluid Dynamics and Co-located Conferences, 2012.

O. Desjardins, R. O. Fox, and P. Villedieu, A quadrature-based moment method for dilute fluidparticle flows, J. of Comput. Phys, vol.227, issue.4, pp.2514-2539, 2008.

B. L. Messinger, Equilibrium temperature of an unheated icing surface as a function of air speed, Journal of the aerospace sciences, vol.20, p.29, 1953.

R. Chauvin, P. Villedieu, and P. Trontin, A robust coupling algorithm applied to thermal ice protection system unsteady modeling, 6th AIAA Atmospheric and Space Environments Conference, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01088749

R. Chauvin, Un modèle unifié pour les phénomènes de givrage en aéronautique et les systèmes de protection thermiques, 2015.

L. Bennani, P. Villedieu, and M. Salaun, Two dimensional model of an electro-thermal ice protection system, 5th AIAA Atmospheric and Space Environments Conference, vol.24, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01853226

L. Bennani, P. Villedieu, M. Salaun, and P. Trontin, Numerical simulation and modeling of ice shedding: Process initiation, Comput. Struct, vol.142, pp.15-27, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01851568

L. Bennani, P. Villedieu, and M. Salaun, A mixed adhesion-brittle fracture model and its application to the numerical study of ice shedding mechanisms, Engineering Fracture Mechanics, vol.158, pp.59-80, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01662767

L. Bennani, Modélisation bidimensionnelle de systèmesélectrothermiques de protection contre le givre, 2014.

P. Trontin, IGLOO2D v1.1.01 : base de validation, ONERA

R. Chauvin, Un modèle unifié pour les phénomènes de givrage en aéronautique et les systèmes de protection thermiques, 2015.

L. Bennani, Modélisation bidimensionnelle de systèmesélectrothermiques de protection contre le givre, 2014.

R. Chauvin, L. Bennani, P. Trontin, and P. Villedieu, An implicit time marching Galerkin method for the simulation of icing phenomena with a triple layer model, Finite Elements in Analysis and Design, vol.150, pp.20-33, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01870069

K. M. Al-khalil, T. G. Keith, and K. J. De-witt, Further development of an anti-icing runback model, 29th AIAA Aerospace Sciences Meeting, 1991.

J. C. Tsao and A. P. Rothmayer, Application of triple-deck theory to the prediction of glaze ice roughness formation on an airfoil leading edge, Computers & fluids, vol.31, issue.8, pp.977-1014, 2002.

J. C. Tsao, A. P. Rothmayer, and A. I. Ruban, Stability of air flow past thin liquid films on airfoils, Computers & fluids, vol.26, issue.5, pp.427-452, 1997.

S. P. Otta and A. P. Rothmayer, Instability of stagnation line icing, Computers & Fluids, vol.38, issue.2, pp.273-283, 2009.

Y. Bourgault, H. Beaugendre, and W. G. Habashi, Development of a shallow-water icing model in FENSAP-ICE, J. of Aircraft, vol.37, issue.4, pp.640-646, 2000.

P. Lavoie, S. Bourgault-côté, and E. Laurendeau, Numerical algorithms for infinite swept wing ice accretion, Computers & Fluids, vol.161, pp.189-198, 2018.

P. Verdin, J. P. Charpin, and C. P. Thompson, Multistep results in ICECREMO2, J. of Aircraft, vol.46, issue.5, pp.1607-1613, 2009.

T. G. Myers and D. W. Hammond, Ice and water film growth from incoming supercooled droplets, Int. J. of Heat and Mass Transfer, vol.42, issue.12, pp.2233-2242, 1999.

T. G. Myers, Extension to the messinger model for aircraft icing, AIAA J, vol.39, issue.2, pp.211-218, 2001.

G. Gori, M. Zocca, M. Garabelli, A. Guardone, and G. Quaranta, PoliMIce: A simulation framework for three-dimensional ice accretion, Applied Mathematics and Computation, vol.267, pp.96-107, 2015.

D. Yanxia, G. Yewei, X. Chunhua, and Y. Xian, Investigation on heat transfer characteristics of aircraft icing including runback water, Int. J. of Heat and Mass Transfer, vol.53, pp.3702-3707, 2010.

T. G. Myers, S. L. Mitchell, G. Muchatibaya, and M. Y. Myers, A cubic heat balance integral method for one-dimensional melting of a finite thickness layer, Int. J. of Heat and Mass Transfer, vol.50, pp.5305-5317, 2007.

D. J. Benney, Long waves on liquid films, J. of mathematics and physics, vol.45, issue.1-4, pp.150-155, 1966.

P. L. Roe, Approximate riemann solvers, parameter vectors, and difference schemes, J. of Comput. Phys, vol.43, issue.2, pp.357-372, 1981.

V. Alexiades and A. D. Solomon, Mathematical modeling of melting and freezing processes. Hemisphere, 1993.

H. A. Schwarz, Über einen Grenzübergang durch alternirendes Verfahren. Vierteljahrsschrift der Naturforschenden Gesellschaft in Zürich, vol.15, pp.272-286, 1870.

P. L. Lions, On the schwarz alternating method. iii : a variant for nonoverlapping subdomains, Third International Symposium on Domain Decomposition Methods for Partial Differential Equations, 1990.

P. Charton, F. Nataf, and F. Rogier, Méthode de décomposition de domaine pour l'équation d'advection-diffusion, C.R.Acad. Sci, vol.313, issue.9, pp.623-626, 1991.

Y. Wei, R. M. Adamson, and J. P. Dempsey, Ice/metal interfaces: fracture energy and fractography, J. of materials science, vol.31, issue.4, pp.943-947, 1996.

C. Miehe, M. Hofacker, and F. Welschinger, A phase field model for rate-independent crack propagation: Robust algorithmic implementation based on operator splits, Computer Methods in Applied Mechanics and Engineering, vol.199, pp.2765-2778, 2010.

J. Lemaitre, J. L. Chaboche, A. Benallal, and R. Desmorat, Mécanique des matériaux solides, 2009.

A. Griffith and M. Eng, Vi. the phenomena of rupture and flow in solids, Phil. Trans. R. Soc. Lond. A, vol.221, pp.163-198, 1921.

B. Bourdin, G. A. Francfort, and J. J. Marigo, The variational approach to fracture, J. of elasticity, vol.91, issue.1-3, pp.5-148, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00551079

. .. Line, 3.3 Shallow water like system (conservative formulation), Modeling of thin liquid films with a contact

P. .. Conclusions,

, The development of a shallow water type model to simulate dynamics of thin partially wetting films is proposed. It is mainly based on the PhD works of J. Lallement [1], the work of whom I have supervised with P. Villedieu. An article on this topic is being written

J. Lallement, Modélisation et simulation numérique d'écoulements de films minces avec effet de mouillage partiel, 2019.

P. Villedieu, J. Lallement, P. Trontin, C. Laurent, and J. P. Vila, Dealing with contact line forces in shallow water models, XXIV ICTAM, pp.21-26, 2016.

J. Lallement, P. Villedieu, P. Trontin, and C. Laurent, A shallow water type model to describe the dynamic of thin partially wetting films, 2017.

J. Lallement, P. Trontin, C. Laurent, and P. Villedieu, A shallow water type model to describe the dynamic of thin partially wetting films for the simulation of anti-icing systems, 10th AIAA Atmospheric and Space Environments Conference, pp.25-29, 2018.

P. Villedieu, J. Lallement, P. Trontin, and C. Laurent, Numerical simulation of rivulets formation based on a shallow water type model, 13th World Congress in Computational Mechanics (WCCM), pp.22-27, 2018.

P. G. De-gennes, Wetting: statics and dynamics, Reviews of modern physics, vol.57, issue.3, p.827, 1985.

J. H. Snoeijer and B. Andreotti, Moving contact lines: scales, regimes, and dynamical transitions. Annual review of fluid mechanics, vol.45, 2013.

E. B. Dussan, On the spreading of liquids on solid surfaces: static and dynamic contact lines, Annual Review of Fluid Mechanics, vol.11, issue.1, pp.371-400, 1979.

K. Zhang, T. Wei, and H. Hu, An experimental investigation on the surface water transport process over an airfoil by using a digital image projection technique, Experiments in Fluids, vol.56, issue.9, p.173, 2015.

K. M. Al-khalil, T. G. Keith, and K. J. Dewitt, Numerical modeling of runback water on ice protected aircraft surfaces, 5th Symposium on Numerical & Physical Aspects of Aerodynamics Flows, 1992.

G. Silva, O. Silvares, and E. Zerbini, Water film breakdown and rivulets formation effects on thermal anti-ice operation simulation, 9th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, 2006.

A. N. Frumkin, On wetting and sticking phenomena, Zhurn. Phys. Chem.(USSR), vol.12, pp.337-345, 1938.

B. V. Derjaguin, Tiyra Kapillyarnoy Kondesatsii and Drugiz Kapillapnvix Yavlenii Uchetom Rasklinivayushchevo Daystviya Polimolekuyarnox Shidi Plenox (phonetic translation of the original Russian title), Zh. Fiz. Khim, vol.14, pp.137-147, 1940.

N. V. Churaev, Wetting films and wetting, Revue de Physique Appliquée, vol.23, issue.6, pp.975-987, 1988.
URL : https://hal.archives-ouvertes.fr/jpa-00245926

N. V. Churaev and V. D. Sobolev, Prediction of contact angles on the basis of the frumkin-derjaguin approach, Advances in colloid and interface science, vol.61, pp.1-16, 1995.

P. G. De-gennes, F. Brochard-wyart, and D. Quéré, Capillarity and Wetting Phenomena: Drops, Bubbles, Pearls, Waves, 2004.

P. Noble and J. P. Vila, Stability theory for difference approximations of some dispersive shallow water equations and application to thin film flows, SIAM J. Numer. Anal, vol.52, issue.6, pp.2770-2791, 2014.

C. Huh and L. E. Scriven, Hydrodynamic model of steady movement of a solid/liquid/fluid contact line, J. of Colloid and Interface Science, vol.35, issue.1, pp.85-101, 1971.

S. M. Troian, E. Herbolzheimer, S. A. Safran, and J. F. Joanny, Fingering instabilities of driven spreading films, Europhysics Letters), vol.10, issue.1, p.25, 1989.

A. L. Bertozzi and M. P. Brenner, Linear stability and transient growth in driven contact lines, Phys. Fluids, vol.9, issue.3, pp.530-539, 1997.

L. Kondic, Instabilities in gravity driven flow of thin fluid films, Siam review, vol.45, issue.1, pp.95-115, 2003.

B. , Etude expérimentale de la formation et du comportement de ruisselets sur une paroi, 2019.

M. F. Johnson, R. A. Schluter, M. J. Miksis, and S. G. Bankoff, Experimental study of rivulet formation on an inclined plate by fluorescent imaging, J. Fluid Mech, vol.394, pp.339-354, 1999.

P. Trontin, Développement d'une approche de type LES pour la simulation d'écoulements diphasiques avec interface, 2009.

P. Trontin, S. Vincent, J. L. Estivalezes, and J. P. Caltagirone, Detailed comparisons of frontcapturing methods for turbulent two-phase flow simulations, Int. J. Numer. Meth. Fluid, vol.56, issue.8, pp.1543-1549, 2008.

P. Trontin, S. Vincent, J. L. Estivalezes, and J. P. Caltagirone, Direct numerical simulation of a freely turbulent interfacial flow, Int. J. Mult. Flow, vol.36, pp.891-907, 2010.

P. Trontin, S. Vincent, J. L. Estivalezes, and J. P. Caltagirone, A subgrid computation of the curvature by a particle/level-set method. application to a front-tracking/ghost-fluid method for incompressible flows, J. of Comput. Phys, vol.231, issue.20, pp.6990-7010, 2012.

P. Trontin, S. Vincent, J. L. Estivalezes, and J. P. Caltagirone, An a priori study for the modeling of subgrid terms in multiphase flows, Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol.110, 2010.

P. Trontin, J. L. Estivalezes, S. Vincent, and J. P. Caltagirone, A phase-conditioned filtering of incompressible interfacial multiphase flow equations: A priori study for the modeling of les subgrid scale terms, Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol.125, pp.165-172, 2014.

P. Trontin, S. Vincent, J. L. Estivalezes, and J. P. Caltagirone, Detailed comparisons of frontcapturing methods for turbulent two-phase flow simulations, 2007.

P. Trontin, S. Vincent, J. L. Estivalezes, and J. P. Caltagirone, An a priori study for the modelling of subgrid-scale phenomena in the interaction between a liquid sheet and a decaying turbulence, Proceedings of FEDSM2008

P. Trontin, S. Vincent, J. L. Estivalezes, and J. P. Caltagirone, An a priori study for the modeling of subgrid terms in multiphase flows

J. L. Estivalezes, P. Trontin, S. Vincent, and J. P. Caltagirone, Critical weber number for HIT flow interacting with an interface

S. Vincent, C. Caruyer, J. L. Estivalezes, P. Trontin, and J. P. Caltagirone, Hybrid eulerianlagrangian methods for free surface flow simulations

J. L. Estivalezes, S. Vincent, B. Rabé, J. P. Caltagirone, and P. Trontin, Effects of density ratio during the disintegration of a liquid sheet by a HIT flow, 24 th European Conference on Liquid Atomization and Spray Systems, 2011.

F. Couderc, Développement d'un code de calcul pour la simulation d'écoulements de fluides non miscibles, 2007.

A. J. Chorin, Numerical solution of the navier-stokes equations, Math. Comput, vol.22, issue.104, pp.745-762, 1968.

R. Temam, Sur l'approximation de la solution deséquations de navier-stokes par la méthode des pas fractionnaires, Arch. Ration. Mech. Anal, vol.32, issue.2, pp.135-153, 1969.

F. H. Harlow and J. E. Welch, Numerical calculation of time-dependent viscous incompressible flow of fluid with free surface. Phys. of fluids, vol.8, pp.2182-2189, 1965.

S. Osher and J. A. Sethian, Fronts propagating with curvature-dependent speed: algorithms based on hamilton-jacobi formulations, J. Comput. Phys, vol.79, issue.1, pp.12-49, 1988.

M. Sussman, P. Smereka, and S. Osher, A level set approach for computing solutions to incompressible two-phase flow, J. Comput. Phys, vol.114, issue.1, pp.146-159, 1994.

M. Sussman and E. G. Puckett, A coupled level set and volume-of-fluid method for computing 3d and axisymmetric incompressible two-phase flows, J. Comput. Phys, vol.162, issue.2, pp.301-337, 2000.

M. Sussman, A second order coupled level set and volume-of-fluid method for computing growth and collapse of vapor bubbles, J. Comput. Phys, vol.187, issue.1, pp.110-136, 2003.

R. P. Fedkiw, T. Aslam, B. Merriman, and S. Osher, A non-oscillatory Eulerian approach to interfaces in multimaterial flows (the ghost fluid method), J. Comput. Phys, vol.152, issue.2, pp.457-492, 1999.

R. Scardovelli and S. Zaleski, Direct numerical simulation of free-surface and interfacial flow. Annual review of fluid mechanics, vol.31, pp.567-603, 1999.

S. Shin and D. Juric, Modeling three-dimensional multiphase flow using a level contour reconstruction method for front tracking without connectivity, J. Comput. Phys, vol.180, issue.2, pp.427-470, 2002.
URL : https://hal.archives-ouvertes.fr/hal-02146146

S. T. Zalesak, Fully multidimensional flux-corrected transport algorithms for fluids, J. Comput. Phys, vol.31, issue.3, pp.335-362, 1979.

C. Shu, Essentially non-oscillatory and weighted essentially non-oscillatory schemes for hyperbolic conservation laws, Advanced numerical approximation of nonlinear hyperbolic equations, pp.325-432, 1998.

D. L. Youngs, Time-dependent multi-material flow with large fluid distortion. Numerical methods for fluid dynamics, 1982.

J. B. Bell, P. Colella, and H. M. Glaz, A second-order projection method for the incompressible navier-stokes equations, J. Comput. Phys, vol.85, issue.2, pp.257-283, 1989.

J. Bardina, J. H. Ferziger, and W. C. Reynolds, Improved subgrid-scale models for large-eddy simulation, 13th AIAA Fluid and PlasmaDynamics Conference, 1980.

J. Bardina, J. H. Ferziger, and W. C. Reynolds, Improved turbulence models based on large eddy simulation of homogeneous, incompressible turbulent flows, 1983.

D. Zuzio and J. L. Estivalezes, An efficient block parallel AMR method for two phase interfacial flow simulations, Comput. Fluids, vol.44, issue.1, pp.339-357, 2011.

A. Orazzo, I. Lagrange, J. L. Estivalezes, and D. Zuzio, A VOF-based consistent mass-momentum transport for two-phase flow simulations, ASME 2017 Fluids Engineering Division Summer Meeting, 2017.

S. Vincent, M. Tavares, S. Fleau, S. Mimouni, M. Ould-rouiss et al., A priori filtering and les modeling of turbulent two-phase flows application to phase separation, Comput. Fluids, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01420300

M. Herrmann and M. Gorokhovski, An outline of a LES subgrid model for liquid/gas phase interface dynamics, Proceedings of the 2008 CTR Summer Program, pp.171-181, 2008.

P. Trontin, Isogeometric analysis of Euler compressible flow. Application to aerodynamics, 50th AIAA Aerospace Sciences Meeting

T. J. Hughes, J. A. Cottrell, and Y. Bazilevs, Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement, Computer methods in applied mechanics and engineering, vol.194, pp.4135-4195, 2005.
URL : https://hal.archives-ouvertes.fr/hal-01513346

J. A. Cottrell, T. J. Hughes, and Y. Bazilevs, Isogeometric analysis: toward integration of CAD and FEA, 2009.

F. Bassi and S. Rebay, High-Order Accurate Discontinuous Finite Element Solution of the 2D Euler Equations, Journal of Computational Physics, vol.138, issue.2, pp.251-285, 1997.

Y. Bazilevs, L. B. Da-veiga, J. A. Cottrell, T. J. Hughes, and G. Sangalli, Isogeometric analysis: approximation, stability and error estimates for h-refined meshes, Mathematical Models and Methods in Applied Sciences, vol.16, issue.7, p.1031, 2006.

L. A. Piegl and W. Tiller, The NURBS book, 1997.

M. G. Cox, The numerical evaluation of b-splines, IMA Journal of Applied Mathematics, vol.10, issue.2, p.134, 1972.

C. D. Boor, On calculation with B-splines, Journal of Approximation Theory, vol.6, pp.50-62, 1972.

Y. Saad and M. H. Schultz, Gmres: A generalized minimal residual algorithm for solving nonsymmetric linear systems, SIAM J. Sci. Stat. Comput, vol.7, issue.3, pp.856-869, 1986.

G. J. Beau and T. E. Tezduyar, Army High Performance Computing Research Center, and University of Minnesota. Finite element computation of compressible flows with the SUPG formulation. Army High Performance Computing Research Center, 1991.

L. Catabriga, A. Coutinho, and T. E. Tezduyar, Compressible flow supg parameters computed from element matrices, Communications in numerical methods in engineering, vol.21, issue.9, pp.465-476, 2005.

. .. Introduction, 139 10.2 Basics of the adjoint method

P. .. Conclusions,

J. Peter, M. Nguyen-dinh, and P. Trontin, Goal oriented mesh adaptation using total derivative of aerodynamic functions with respect to mesh coordinates-with applications to euler flows, Computers & fluids, vol.66, pp.194-214, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00769151

J. Peter, P. Trontin, and M. Nguyen-dinh, Total derivative of aerodynamic function w.r.t. mesh coordinates for shape optimization and goal oriented mesh adaptation, ICCFD

J. Peter, P. Trontin, and M. Nguyen-dinh, Goal oriented mesh adaptation using total derivative of aerodynamic functions with respect to mesh coordinates, 49th AIAA Aerospace Sciences Meeting
URL : https://hal.archives-ouvertes.fr/hal-00769599

M. Nguyen-dinh, P. Trontin, M. Meaux, J. Peter, and F. Renac, Total derivative of aerodynamic functions w.r.t. volume or wall mesh nodes for shape optimization and mesh adaptation, 11 th ONERA-DLR Aerospace Symposium

J. Peter, M. Nguyen-dinh, and P. Trontin, Goal oriented mesh adaptation using a projection of the total derivative of aerodynamic functions with respect to mesh coordinates, 50th AIAA Aerospace Sciences Meeting

P. Trontin, J. Peter, and F. Renac, Discrete adjoint solver for design in aeronautics, FLOWHEAD, workshop on industrial design optimization for fluid

M. Nguyen-dinh, Qualification of numerical simulations by anisotropic mesh adaptation, 2014.
URL : https://hal.archives-ouvertes.fr/tel-00987202

S. Bourasseau, Contributionà une méthode de raffinement de maillage basée sur le vecteur adjoint pour le calcul de fonctions aérodynamiques, 2015.

M. B. Giles and N. A. Pierce, An introduction to the adjoint approach to design. Flow, turbulence and combustion, vol.65, pp.393-415, 2000.

O. Pironneau, On optimum design in fluid mechanics, Journal of Fluid Mechanics, vol.64, issue.1, pp.97-110, 1974.

A. Jameson, Aerodynamic design via control theory, Journal of scientific computing, vol.3, issue.3, pp.233-260, 1988.

J. Reuter and A. Jameson, Control theory based airfoil design for potential flow and a finite volume discretization, 32nd Aerospace Sciences Meeting and Exhibit, p.499, 1994.

A. Jameson, Optimum aerodynamic design using cfd and control theory, 12th Computational Fluid Dynamics Conference, p.1729, 1995.

A. Jameson and J. Reuther, Control theory based airfoil design using the euler equations, 5th Symposium on Multidisciplinary Analysis and Optimization, p.4272, 1994.

A. Jameson, L. Martinelli, and N. A. Pierce, Optimum aerodynamic design using the navier-stokes equations. Theoretical and computational fluid dynamics, vol.10, pp.213-237, 1998.

J. Reuther, A. Jameson, J. Farmer, L. Martinelli, and D. Saunders, Aerodynamic shape optimization of complex aircraft configurations via an adjoint formulation, 34th Aerospace Sciences Meeting and Exhibit, p.94, 1996.

A. Jameson, Re-engineering the design process through computation, Journal of Aircraft, vol.36, issue.1, pp.36-50, 1999.

J. Reuther, A. Jameson, M. J. Alonso, J. Rimlinger, and D. Saunders, Constrained multipoint aerodynamic shape optimization using an adjoint formulation and parallel computers, part 1, Journal of aircraft, vol.36, issue.1, pp.51-60, 1999.

J. Reuther, A. Jameson, J. Alonso, M. J. Rimlinger, and D. Saunders, Constrained multipoint aerodynamic shape optimization using an adjoint formulation and parallel computers, part 2, Journal of aircraft, vol.36, issue.1, pp.61-74, 1999.

J. C. Newman, I. , A. C. Taylor, I. , R. W. Barnwell et al., Overview of sensitivity analysis and shape optimization for complex aerodynamic configurations, Journal of Aircraft, vol.36, issue.1, pp.87-96, 1999.

C. Johnson, R. Rannacher, and M. Boman, Numerics and hydrodynamic stability: toward error control in computational fluid dynamics, SIAM Journal on Numerical Analysis, vol.32, issue.4, pp.1058-1079, 1995.

R. Becker and R. Rannacher, Weighted a posteriori error control in FE methods, 1996.

R. Becker and R. Rannacher, An optimal control approach to a posteriori error estimation in finite element methods. Acta numerica, vol.10, pp.1-102, 2001.

E. Suli, Adaptive error control for finite element approximations of the lift and drag coefficients in viscous flow, 1997.

S. Prudhomme and J. T. Oden, On goal-oriented error estimation for elliptic problems: application to the control of pointwise errors, Computer Methods in Applied Mechanics and Engineering, vol.176, issue.1-4, pp.313-331, 1999.

M. G. Larson and T. J. Barth, A posteriori error estimation for adaptive discontinuous galerkin approximations of hyperbolic systems, Discontinuous Galerkin Methods, pp.363-368, 2000.

L. Machiels, J. Peraire, and A. T. Patera, A posteriori finite-element output bounds for the incompressible navier-stokes equations: application to a natural convection problem, Journal of Computational Physics, vol.172, issue.2, pp.401-425, 2001.

R. Hartmann and P. Houston, Adaptive discontinuous galerkin finite element methods for the compressible euler equations, Journal of Computational Physics, vol.183, issue.2, pp.508-532, 2002.

T. Leicht and R. Hartmann, Error estimation and anisotropic mesh refinement for 3d laminar aerodynamic flow simulations, Journal of Computational Physics, vol.229, issue.19, pp.7344-7360, 2010.

R. Hartmann, J. Held, and T. Leicht, Adjoint-based error estimation and adaptive mesh refinement for the rans and k-? turbulence model equations, Journal of Computational Physics, vol.230, issue.11, pp.4268-4284, 2011.

A. Loseille, A. Dervieux, and F. Alauzet, Fully anisotropic goal-oriented mesh adaptation for 3d steady euler equations, Journal of computational physics, vol.229, issue.8, pp.2866-2897, 2010.

D. J. Mavriplis, Multigrid solution of the discrete adjoint for optimization problems on unstructured meshes, AIAA journal, vol.44, issue.1, pp.42-50, 2006.

P. Trontin and J. Peter, Développement du mode adjoint d'elsA. Contrat DTP Optimisation 2/FLIPPER, 2011.

N. Pierce and M. B. Giles, Adjoint recovery of superconvergent functionals from pde approximations, SIAM review, vol.42, issue.2, pp.247-264, 2000.

N. Pierce and M. B. Giles, Adjoint and defect error bounding and correction for functional estimates, Journal of Computational Physics, vol.200, issue.2, pp.769-794, 2004.

D. A. Venditti and D. L. , Adjoint error estimation and grid adaptation for functional outputs: Application to quasi-one-dimensional flow, Journal of Computational Physics, vol.164, issue.1, pp.204-227, 2000.

D. A. Venditti and D. L. , Grid adaptation for functional outputs: application to twodimensional inviscid flows, Journal of Computational Physics, vol.176, issue.1, pp.40-69, 2002.

D. A. Venditti and D. L. , Anisotropic grid adaptation for functional outputs: application to two-dimensional viscous flows, Journal of Computational Physics, vol.187, issue.1, pp.22-46, 2003.

R. P. Dwight, Goal-oriented mesh adaptation for finite volume methods using a dissipation-based error indicator, Int. J. for Num. Meth. in fluids, vol.56, issue.8, pp.1193-1200, 2008.

R. P. Dwight, Heuristic a posteriori estimation of error due to dissipation in finite volume schemes and application to mesh adaptation, J. of Comput. Phys, vol.227, issue.5, pp.2845-2863, 2008.

M. Nguyen-dinh, J. Peter, R. Sauvage, M. Meaux, and J. A. Désidéri, Mesh quality assessment based on aerodynamic functional output total derivatives, European Journal of Mechanics-B/Fluids, vol.45, pp.51-71, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01107620

G. Todarello, F. Vonck, S. Bourasseau, J. Peter, and J. A. Désidéri, Finite-volume goal-oriented mesh adaptation for aerodynamics using functional derivative with respect to nodal coordinates, Journal of Computational Physics, vol.313, pp.799-819, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01410153