A. Ahadi and Q. Sun, Effects of grain size on the rate-dependent thermomechanical responses of nanostructured superelastic NiTi, Acta Materialia, vol.76, pp.186-197, 2014.

A. Ahadi, . Rezaei, and . Taheri, Effect of hot rolling on microstructure and transformation cycling behaviour of equiatomic NiTi shape memory alloy, In: Mater. Sci. and Technol, pp.727-732, 2012.

T. Alonso, P. Alvarez-alonso, C. O. Aguilar-ortiz, E. Villa, A. Nespoli et al., Caractérisation par essais DMA et optimisation du comportement thermomécanique de fils de NiTi-ApplicationàApplicationà une aiguille médicale pilotable, Scripta Materialia, vol.128, pp.36-40, 2015.

F. P. Amarante and C. Cismasiu, L ' hypertrophie de la prostate et la ré-tention aiguë d ' urine : vers un stent urétraì a base de bio-matériaux NiTi et silicone, 2011.

R. Arbab-chirani, V. Chevalier, S. Arbab-chirani, and S. Calloch, Comparative analysis of torsional and bending behavior through finite-element models of 5 NiTi endodontic instruments". In: Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology and Endodontology 111, vol.1, pp.115-121, 2011.

X. Balandraud, E. Ernst, and E. Sos, Monotone strain-stress models for shape memory alloys hysteresis loop and pseudoelastic behaviorx, Zeitschrift fr angewandte Mathematik und Physik 56, vol.2, pp.304-356, 2005.
DOI : 10.1007/s00033-004-2026-2

B. Berthel, A. Chrysochoos, B. Wattrisse, and A. Galtier, Infrared image processing for the calorimetric analysis of fatigue phenomena, pp.79-90, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00572333

L. C. Brinson, I. Schmidt, and R. Lammering, Stress-induced transformation behavior of a polycrystalline NiTi shape memory alloy: Micro and macromechanical investigations via in situ optical microscopy, Journal of the Mechanics and Physics of Solids, vol.52, pp.1549-1571, 2004.

L. C. Brown, The Thermal Effect in Pseudoelastic Single Crystals of ?-CuZnSn, In: Metallurgical and Materials Transactions A, vol.12, issue.8, pp.1491-1494, 1981.

S. Bibliography-chang, S. Wu, and G. Chang, Transformation sequence in severely cold-rolled and annealed Ti50Ni50 alloy, Materials Science and Engineering: A 438-440, pp.509-512, 2006.

H. Chee-siong-loh, T. Yokoi, and . Arai, New Shape Memory Alloy Actuator: Design and Application in the Prosthetic Hand, IEEE Engineering in Medicine and Biology 27th Annual Conference, vol.7, pp.6900-6903, 2005.

I. Chen, Y. Chiao, and K. Tsuzaki, Statistics of martensitic nucleation, Acta Metallurgica 33, vol.10, pp.1847-1859, 1985.

A. Chrysochoos, H. Pham, and O. Maisonneuve, Energy balance of thermoelastic martensite transformation under stress, Nuclear Engineering and Design, vol.162, pp.1-12, 1996.
DOI : 10.1016/0029-5493(95)01140-4

A. Chrysochoos, . Huon, J. Jourdan, . Muracciote, B. Peyroux et al., Use of full-field digital image correlation and infrared thermography measurements for the thermomechanical analysis of material behaviour, vol.46, pp.117-130, 2010.

A. Chrysochoos and H. Louche, An infrared image processing to analyse the calorific effects accompanying strain localisation, International Journal of Engineering Science, vol.38, pp.1759-1788, 2000.

C. Cismasiu, Shape Memory Alloys, 2010.

J. Cui, Y. Wu, J. Muehlbauer, Y. Hwang, R. Radermacher et al., Demonstration of high efficiency elastocaloric cooling with large ?T using NiTi wires, Applied Physics Letters, vol.101, p.73904, 2012.

V. Delobelle, D. Favier, and H. Louche, Heat Estimation from Infrared Measurement Compared to DSC for Austenite to R Phase Transformation in a NiTi Alloy, Journal of Materials Engineering and Performance, vol.22, pp.1688-1693, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01300481

V. Delobelle, D. Favier, H. Louche, and N. Connesson, Determination of Local Thermophysical Properties and Heat of Transition from Thermal Fields Measurement During Drop Calorimetric Experiment, Experimental Mechanics, vol.55, pp.711-723, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01300519

V. Delobelle, D. Delpueyo, M. Grédiac, X. Balandraud, and C. Badulescu, ContribuitionsàContribuitions`Contribuitionsà l'´ etude thermomécanique des alliagesàalliages`alliagesà memoire de forme NiTi etàetà la réalisation par soudage e matériaux architecturés NiTi, Mechanics of Materials, vol.45, pp.34-51, 2012.

R. Delville, B. Malard, J. Pilch, P. Sittner, and D. Schryvers, Microstructure changes during non-conventional heat treatment of thin Ni-Ti wires by pulsed electric current studied by transmission electron microscopy, Acta Materialia, vol.58, pp.4503-4515, 2010.

L. Dieng, G. Helbert, S. A. Chirani, T. Lecompte, and P. Pilvin, Use of Shape Memory Alloys damper device to mitigate vibration amplitudes of bridge cables, Engineering Structures, vol.56, pp.1547-1556, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00985898

D. Favier, H. Louche, P. Schlosser, L. Orgéas, P. Vacher et al., Homogeneous and heterogeneous deformation mechanisms in an austenitic polycrystalline Ti-50.8 at.% Ni thin tube under tension. Investigation via temperature and strain fields measurements, Acta Materialia, vol.55, pp.5310-5322, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00336739

J. Frenzel, A. Wieczorek, I. Opahle, B. Maaß, R. Drautz et al., On the effect of alloy composition on martensite start temperatures and latent heats in Ni-Ti-based shape memory alloys, Acta Materialia, vol.90, pp.213-231, 2015.

V. Gheorghita, P. Gümpel, J. Strittmatter, C. Anghel, T. Heitz et al., Using Shape Memory Alloys in Automotive Safety Systems, Lecture Notes in Electrical Engineering, vol.200, pp.909-917, 2013.

A. Glezer, E. Blinova, V. Pozdnyakov, and A. Shelyakov, Martensite Transformation in Nanoparticles and Nanomaterials, Journal of Nanoparticle Research, vol.5, issue.6, pp.551-560, 2003.

S. Gur, S. K. Mishra, and G. N. Frantziskonis, Thermo-mechanical strain ratedependent behavior of shape memory alloys as vibration dampers and comparison to conventional dampers, Journal of Intelligent Material Systems and Structures, vol.27, pp.1250-1264, 2016.

R. F. Hamilton, H. Sehitoglu, Y. Chumlyakov, and H. J. Maier, Stress dependence of the hysteresis in single crystal NiTi alloys, Acta Materialia, vol.52, pp.3383-3402, 2004.

Y. J. He and Q. P. Sun, Frequency-dependent temperature evolution in NiTi shape memory alloy under cyclic loading, Smart Materials and Structures 19, vol.11, p.115014, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01241586

Y. He and Q. Sun, On non-monotonic rate dependence of stress hysteresis of superelastic shape memory alloy bars, International Journal of Solids and Structures, vol.48, pp.1688-1695, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00830703

Y. He, H. Yin, R. Zhou, and Q. Sun, Ambient effect on damping peak of NiTi shape memory alloy, Materials Letters, vol.64, pp.1483-1486, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01241581

Q. Kan, C. Yu, G. Kang, J. Li, and W. Yan, Experimental observations on rate-dependent cyclic deformation of super-elastic NiTi shape memory alloy, Mechanics of Materials 97, pp.48-58, 2016.

J. Khalil-allafi and B. Amin-ahmadi, The effect of chemical composition on enthalpy and entropy changes of martensitic transformations in binary NiTi shape memory alloys, Journal of Alloys and Compounds, vol.487, issue.2, pp.363-366, 2009.

I. Khmelevskaya, E. Ryklina, S. Prokoshkin, G. Markossian, E. Tarutta et al., A shape memory device for the treatment of high myopia, Materials Science and Engineering, pp.651-653, 2008.

J. Koike, D. M. Parkin, and M. Nastasi, Crystal-to-amorphous transformation of NiTi induced by cold rolling, Journal of Materials Research, vol.5, pp.1414-1418, 1990.
DOI : 10.1557/jmr.1990.1414

D. C. Lagoudas, Shape Memory Alloys, p.435, 2008.
URL : https://hal.archives-ouvertes.fr/hal-01199907

P. Leo, T. Shield, and O. Bruno, Transient heat transfer effects on the pseudoelastic behavior of shape-memory wires, Acta Metallurgica et Materialia 41, vol.8, pp.2477-2485, 1993.

C. Li, L. Chiang, Y. Hsu, and W. Wang, Cold Rolling-Induced Multistage Transformation in Ni-Rich NiTi Shape Memory Alloys, MATERIALS TRANSACTIONS 49, vol.9, pp.2136-2140, 2008.
DOI : 10.2320/matertrans.e2008001
URL : https://www.jstage.jst.go.jp/article/matertrans/49/10/49_E2008001/_pdf

H. Louche, Analyse pas thermographie infrarouge des effets dissipatifs de la localisation dans des aciers, p.272, 1999.

H. Bibliography-louche and A. Chrysochoos, Thermal and dissipative effects of accompanying Lüders band propagation, Materials Science and Engineering A, vol.307, issue.2, pp.15-22, 2001.

H. Louche, P. Vacher, and R. Arrieux, Thermal observations associated with the Portevin-Le Châtelier effect in an Al-Mg alloy, Materials Science and Engineering A, vol.404, issue.2, pp.188-196, 2005.
DOI : 10.1016/j.msea.2005.05.058

P. Mccormick, Y. Liu, and S. Miyazaki, Intrinsic thermal-mechanical behaviour associated with the stress-induced martensitic transformation in NiTi, Materials Science and Engineering: A, vol.167, issue.2, pp.51-56, 1993.

J. L. Mcnichols and J. S. Cory, Thermodynamics of Nitinol". In: Journal of Applied Physics, vol.61, pp.972-984, 1987.

C. Messner, G. Reisner, Q. P. Sun, and E. Werner, On instabilities and autocatalytic effects associated with the nucleation of martensite bands in polycrystalline SMA flat tensile specimens, Computational Materials Science, vol.19, pp.313-319, 2000.

D. Miller and D. C. Lagoudas, Influence of cold work and heat treatment on the shape memory effect and plastic strain development of NiTi, Materials Science and Engineering: A, vol.308, issue.2, pp.161-175, 2001.

M. E. Mitwally and M. Farag, Effect of cold work and annealing on the structure and characteristics of NiTi alloy, Materials Science and Engineering: A, vol.519, issue.2, pp.155-166, 2009.

S. Miyazaki, T. Imai, K. Otsuka, and Y. Suzuki, Lüders-like deformation observed in the transformation pseudoelasticity of a TiNi alloy, Scripta Metallurgica 15, vol.8, pp.853-856, 1981.

S. Miyazaki, S. Kimura, K. Otsuka, and Y. Suzuki, The habit plane and transformation strains associated with the martensitic transformation in Ti-Ni single crystals, Scripta Metallurgica 18, vol.9, pp.883-888, 1984.
DOI : 10.1016/0036-9748(84)90254-0

M. Jani, J. , M. Leary, A. Subic, and M. A. Gibson, A review of shape memory alloy research, applications and opportunities, Materials & Design, vol.56, pp.1078-1113, 2013.

K. Mukherjee, S. Sircar, and N. B. Dahotre, Thermal effects associated with stress-induced martensitic transformation in a TiNi alloy, Materials Science and Engineering, vol.74, pp.75-84, 1985.
DOI : 10.1016/0025-5416(85)90111-9

L. Orgéas and D. Favier, Stress-induced martensitic transformation of a NiTi alloy in isothermal shear, tension and compression, Acta Materialia, vol.46, pp.5579-5591, 1998.

J. Ortín and A. Planes, Thermodynamic analysis of thermal measurements in thermoelastic martensitic transformations, Acta Metallurgica 36, pp.1873-1889, 1988.

J. Ortín and A. Planes, Thermodynamics of thermoelastic martensitic transformations, Acta Metallurgica, vol.37, pp.1433-1441, 1989.

J. Ortín, A. Planes, and ;. Transformations, Le Journal de Physique IV 01.C4, pp.4-13, 1991.

H. Ossmer, . Lambrecht, C. Gultig, . Chluba, M. Quandt et al., Evolution of temperature profiles in TiNi films for elastocaloric cooling, Acta Materialia, vol.81, pp.9-20, 2014.

H. Ossmer, S. Miyazaki, and M. Kohl, Elastocaloric heat pumping using a shape memory alloy foil device, 2015 Transducers-2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems, pp.726-729, 2015.

K. Otsuka and X. Ren, Physical metallurgy of Ti-Ni-based shape memory alloys, Progress in Materials Science 50, vol.5, pp.511-678, 2005.

K. Otsuka and C. Wayman, Shape memory materials, vol.1, 1998.

Q. Pan and C. Cho, The Investigation of a Shape Memory Alloy Micro-Damper for MEMS Applications, Sensors 7.9, pp.1887-1900, 2007.

G. J. Pataky, E. Ertekin, and H. Sehitoglu, Elastocaloric cooling potential of NiTi, Ni2FeGa, and CoNiAl, Acta Materialia 96, pp.420-427, 2015.

J. R. Patel and M. Cohen, Criterion for the action of applied stress in the martensitic transformation, Acta Metallurgica 1.5, pp.531-538, 1953.

A. R. Pelton, B. Clausen, and A. P. Stebner, Situ Neutron Diffraction Studies of Increasing Tension Strains of Superelastic Nitinol, pp.375-386, 2015.

M. Peterlechner, J. Bokeloh, G. Wilde, and T. Waitz, Study of relaxation and crystallization kinetics of NiTi made amorphous by repeated cold rolling, Acta Materialia, vol.58, pp.6637-6648, 2010.

R. Peyroux, C. Chrysochoos, and . Licht, Thermomechanical coupling and pseudoelasticity of shape memory alloys, International Journal of Engineering Science, vol.36, pp.489-509, 1998.

R. Peyroux, A. Chrysochoos, C. Licht, and M. Löbel, THERMOMECHANICAL COUPLINGS AND PSEUDOELASTICITY OF SHAPE MEMORY ALLOYS, International Journal of Engineering Science, vol.36, pp.489-509, 1998.
URL : https://hal.archives-ouvertes.fr/hal-02000681

E. Pieczyska, Activity of stress-induced martensite transformation in TiNi shape memory alloy studied by infrared technique, Journal of Modern Optics, vol.57, pp.1700-1707, 2010.

S. Qian, Y. Wang, Y. Geng, J. Ling, J. Muehlbauer et al., Experimental Evaluation of a Compressive Elastocaloric Cooling System, 16th International Refrigeration and Air Conditioning Conference at Purdue, p.2385, 2016.

S. Qian, Y. Geng, Y. Wang, J. Ling, Y. Hwang et al., A review of elastocaloric cooling: Materials, cycles and system integrations, International Journal of Refrigeration, vol.64, pp.1-19, 2016.

G. Quan, Y. Mao, G. Li, W. Lv, Y. Wang et al., A characterization for the dynamic recrystallization kinetics of as-extruded 7075 aluminum alloy based on true stress-strain curves, Computational Materials Science, vol.55, pp.65-72, 2012.

D. Rittel, On the conversion of plastic work to heat during high strain rate deformation of glassy polymers, Mechanics of Materials, vol.31, pp.131-139, 1999.

C. Rodriguez and L. C. Brown, The thermal effect due to stress-induced martensite formation in-CuAlNi single crystals, Metallurgical Transactions A 11, pp.147-150, 1980.

J. Bibliography-roh, Thermomechanical Modeling of Shape Memory Alloys with Rate Dependency on the Pseudoelastic Behavior, Mathematical Problems in Engineering, pp.1-9, 2014.

R. Salzbrenner and M. Cohen, On the thermodynamics of thermoelastic martensitic transformations, Acta Metallurgica, vol.27, pp.739-748, 1979.

P. Schlosser, Influence of thermal and mechanical aspects on deformation behaviour of NiTi alloys, 2008.
URL : https://hal.archives-ouvertes.fr/tel-00384405

P. Schlosser, H. Louche, D. Favier, and L. Orgéas, Image Processing to Estimate the Heat Sources Related to Phase Transformations during Tensile Tests of NiTi Tubes, pp.260-271, 2007.

I. Schmidt, A Phenomenological Model for Superelastic NiTi Wires Based on Plasticity With Focus on Strain-Rate Dependency Caused by Temperature, Journal of Engineering Materials and Technology, vol.128, p.279, 2006.

M. Schmidt, A. Schütze, and S. Seelecke, Scientific test setup for investigation of shape memory alloy based elastocaloric cooling processes, International Journal of Refrigeration, vol.54, pp.88-97, 2015.

M. Schmidt, J. Ullrich, A. Wieczorek, J. Frenzel, A. Schütze et al., Thermal Stabilization of NiTiCuV Shape Memory Alloys: Observations During Elastocaloric Training, Shape Memory and Superelasticity, pp.132-141, 2015.

M. Schmidt, . S.-m, S. Kirsch, A. Seelecke, S. Schütze et al., Elastocaloric Cooling: from Fundamental Thermodynamics to Solid State Air Conditioning, Science and Technology for the Built Environment, vol.22, pp.475-488, 2016.

A. Sergueeva, R. Song, A. Valiev, and . Mukherjee, Structure and properties of amorphous and nanocrystalline NiTi prepared by severe plastic deformation and annealing, In: Materials Science and Engineering: A, vol.339, issue.2, pp.159-165, 2003.

J. Shaw, Thermomechanical aspects of NiTi, Journal of the Mechanics and Physics of Solids, vol.43, pp.1243-1281, 1995.

J. A. Shaw and S. Kyriakides, Initiation and propagation of localized deformation in elasto-plastic strips under uniaxial tension, International Journal of Plasticity, vol.13, pp.837-871, 1997.

J. Shaw, On the nucleation and propagation of phase transformation fronts in a NiTi alloy, Acta Materialia, vol.45, pp.683-700, 1997.

X. Shi, L. Cui, D. Jiang, C. Yu, F. Guo et al., Grain size effect on the R-phase transformation of nanocrystalline NiTi shape memory alloys, Journal of Materials Science, vol.49, pp.4643-4647, 2014.

P. Sittner, V. Liu, ;. Novak, P. Sittner, M. Landa et al., R-phase transformation phenomena in thermomechanically loaded NiTi polycrystals, Journal of Materials Engineering and Performance, vol.53, pp.2303-2314, 2005.

A. P. Stebner, H. M. Paranjape, B. Clausen, L. C. Brinson, and A. R. Pelton, Situ Neutron Diffraction Studies of Large Monotonic Deformations of Superelastic Nitinol, pp.252-267, 2015.

Q. P. Sun and Z. Q. Li, Phase transformation in superelastic NiTi polycrystalline micro-tubes under tension and torsion-From localization to homogeneous deformation, International Journal of Solids and Structures, vol.39, pp.3797-3809, 2002.

K. Tsuchiya, M. Inuzuka, D. Tomus, A. Hosokawa, H. Nakayama et al., Martensitic transformation in nanostructured TiNi shape memory alloy formed via severe plastic deformation, Materials Science and Engineering, pp.643-648, 2006.

J. Tu?ek, K. Engelbrecht, L. P. Mikkelsen, and N. Pryds, Elastocaloric effect of Ni-Ti wire for application in a cooling device, Journal of Applied Physics, vol.117, p.12, 2015.

J. Tu?ek, K. Engelbrecht, and N. Pryds, Elastocaloric effect of a Ni-Ti plate to be applied in a regenerator-based cooling device, Science and Technology for the Built Environment, vol.22, pp.489-499, 2016.

J. Tu?ek, K. Engelbrecht, L. Mañosa, E. Vives, and N. Pryds, Understanding the Thermodynamic Properties of the Elastocaloric Effect Through Experimentation and Modelling, Shape Memory and, pp.317-329, 2016.

T. Waitz, . Tsuchiya, F. D. Antretter, and . Fischer, Phase Transformations of Nanocrystalline Martensitic Materials, MRS Bulletin, vol.34, issue.11, pp.814-821, 2009.

P. Wollants, J. Roos, and L. Delaey, Thermally-and stress-induced thermoelastic martensitic transformations in the reference frame of equilibrium thermodynamics, Progress in Materials Science, vol.37, pp.227-288, 1993.

Y. Wu, E. Ertekin, and H. Sehitoglu, Elastocaloric cooling capacity of shape memory alloys-Role of deformation temperatures, mechanical cycling, stress hysteresis and inhomogeneity of transformation, Acta Materialia, vol.135, pp.158-176, 2017.

Y. Xiao, P. Zeng, and L. Lei, Grain size effect on mechanical performance of nanostructured superelastic NiTi alloy, 2017.

X. Xie, Q. Kan, G. Kang, F. Lu, and K. Chen, Observation on rate-dependent cyclic transformation domain of super-elastic NiTi shape memory alloy, Materials Science and Engineering A, vol.671, pp.32-47, 2016.

S. Yang, J. Han, and I. Lee, Characteristics of smart composite wing with SMA actuators and optical fiber sensors, International Journal of Applied Electromagnetics and Mechanics, vol.23, pp.177-186, 2006.

H. Yin and Q. Sun, Temperature Variation in NiTi Shape Memory Alloy During Cyclic Phase Transition, Journal of Materials Engineering and Performance, vol.21, pp.2505-2508, 2012.

H. Yin, Y. He, and Q. Sun, Effect of deformation frequency on temperature and stress oscillations in cyclic phase transition of NiTi shape memory alloy, Journal of the Mechanics and Physics of Solids, vol.67, pp.100-128, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01241642

C. Yu, B. Aoun, L. Cui, Y. Liu, H. Yang et al., Synchrotron high energy X-ray diffraction study of microstructure evolution of severely cold drawn NiTi wire during annealing, Acta Materialia, vol.115, pp.35-44, 2016.

R. Zaera, J. A. Rodríguez-martínez, A. Casado, J. Fernández-sáez, A. Rusinek et al., A constitutive model for analyzing martensite formation in austenitic steels deforming at high strain rates, International Journal of Plasticity, vol.29, pp.77-101, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01108963

R. Bibliography-zaera, J. A. Rodríguez-martínez, and D. Rittel, On the Taylor-Quinney coefficient in dynamically phase transforming materials. Application to 304 stainless steel, International Journal of Plasticity, vol.40, pp.185-201, 2013.

X. Zhang, P. Feng, Y. He, T. Yu, and Q. Sun, Experimental study on rate dependence of macroscopic domain and stress hysteresis in NiTi shape memory alloy strips, International Journal of Mechanical Sciences, vol.52, pp.1660-1670, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01241589

S. Zhu and Y. Zhang, A thermomechanical constitutive model for superelastic SMA wire with strain-rate dependence, Smart Materials and Structures 16, pp.1696-1707, 2007.