P. Childs, J. Greenwood, C. Long, C. T. Kidd, and C. G. Nelson, Heat flux measurement techniques proceedings of the Institution of mechanical engineers Azerou, « Conception, réalisation et mise en oeuvre de fluxmètres thermiques passifs et dynamiques à base de couches minces, Thèse de l'Université de Nantes Proc. 41 st Int. Instrum. Symp., Auora, CO (United States), pp.655-677, 1978.

C. Brunjail and F. , Capteurs ?? impulsion pour la caract??risation des transferts thermiques entre une paroi et son environnement microclimatique en r??gime variable, Revue de Physique Appliqu??e, vol.1, issue.4, pp.187-199, 1982.
DOI : 10.1051/rphysap:01982001704018700

H. Cordier, Une nouvelle méthode de mesure de coefficients locaux de convection, 1958.

A. V. Murthy, D. P. Dewitt, B. K. Tsai, G. T. Fraser, and R. D. Saunders, «Temperature and Flux Scales for Heat Flux Sensor Calibration», proc, of AIP Conference, pp.687-692, 2003.
DOI : 10.1063/1.1627207

J. Ballestrin, C. A. Estrada, M. Rodriguez-alonso, C. Perez-rabago, L. W. Langley et al., High-heat-flux sensor calibration using calorimetry, Metrologia, vol.41, issue.4, p.314, 2004.
DOI : 10.1088/0026-1394/41/4/013

A. Gifford, A. Hoffie, T. Diller, and S. Huxtable, Convection Calibration of Schmidt???Boelter Heat Flux Gauges in Stagnation and Shear Air Flow, Journal of Heat Transfer, vol.109, issue.3, 2009.
DOI : 10.1115/1.1650387

D. Holmberg and C. A. Womeldorf, «Performance and modeling of heat flux sensors in different environments», Proc. ASME Heat Transfer Division, pp.71-78, 1999.

P. Thery, B. Duthoit, and J. Pauquet, Propri??t??s thermo??lectriques des syst??mes ?? deux couches minces superpos??es. Application ?? la mesure des flux thermiques, Revue de Physique Appliqu??e, vol.VIII, issue.E, pp.741-747, 1980.
DOI : 10.1051/rphysap:01980001503074100

P. Thery and J. Marechal, «Etude et caractérisation d'un nouveau fluxmètre calorifique, J. Phys. E. Sci. Instrum, vol.13, pp.859-865, 1980.

B. Duthoit and P. Thery, «Caractérisation d'un "bicouche" par traitement d'évolutions thermocinétiques», Entropie, n° 192, pp.49-55, 1980.

J. M. Hager, S. Simmons, D. Smith, L. W. Onishi, T. E. Langley et al., Experimental Performance of a Heat Flux Microsensor, Journal of Engineering for Gas Turbines and Power, vol.113, issue.2, pp.246-250, 1991.
DOI : 10.1115/1.2906555

P. Kayser, M. Rodrigues, and J. C. Godefroy, «Thin gradient heat fluxmeters developed at ONERA», New Trends in Instrumentation for Hypersonic Research, pp.481-492, 1993.
DOI : 10.1007/978-94-011-1828-6_43

D. G. Holmberg and T. E. Diller, High-Frequency Heat Flux Sensor Calibration and Modeling, Journal of Fluids Engineering, vol.3, issue.4, pp.659-664, 1995.
DOI : 10.1115/1.2817319

D. Holmberg, K. Steckler, C. Womeldorf, and W. Grosshandler, «Facility for calibrating heat flux sensors in a convective environment», pp.165-172, 1997.

S. H. Oh, K. C. Lee, J. Chun, M. Kim, and S. S. Lee, Micro heat flux sensor using copper electroplating in SU-8 microstructures, Journal of Micromechanics and Microengineering, vol.11, issue.3, p.221, 2001.
DOI : 10.1088/0960-1317/11/3/310

M. Rencz, E. Kollar, and V. Székely, «Heat-flux sensor to support transient thermal characterisation of IC packages», Sensor Actuat A: Phys, pp.284-292, 2004.
DOI : 10.1016/j.sna.2004.05.002

M. Yala-aithammouda, « Etude et réalisation de microcapteurs de flux thermique en technologie silicium, Thèse de l, 2007.

C. A. Pullins and T. E. Diller, In situ High Temperature Heat Flux Sensor Calibration, International Journal of Heat and Mass Transfer, vol.53, issue.17-18, pp.117-135, 2010.
DOI : 10.1016/j.ijheatmasstransfer.2010.03.042

S. D. Wilson, G. C. Fralick, and J. , Wrbanek et A. Sayir, «Fabrication and testing of a thin-film heat flux sensor for a Stirling convertor», Proc. of the Seventh International Energy Conversion Engineering Conference, 2010.

J. Ewing, A. Gifford, D. Hubble, P. Vlachos, A. Wicks et al., A direct-measurement thin-film heat flux sensor array, Measurement Science and Technology, vol.21, issue.10, p.105201, 2010.
DOI : 10.1088/0957-0233/21/10/105201

L. Li and J. , Wang et X. Fan, «Development of integrated high temperature sensor for simultaneous measurement of wall heat flux and temperature», Rev. Sci. Instrum, vol.83, 2012.

B. A. Jasperson, J. Schmale, W. Qu, F. E. Pfefferkorn, and K. T. Turner, Thin film heat flux sensors fabricated on copper substrates for thermal measurements in microfluidic environments, Journal of Micromechanics and Microengineering, vol.24, issue.12, p.125018, 2014.
DOI : 10.1088/0960-1317/24/12/125018

A. H. Epstein, G. R. Guenette, and R. J. , High???frequency response heat???flux gauge, Review of Scientific Instruments, vol.4, issue.4, pp.639-649, 1986.
DOI : 10.2514/3.1586

M. Hayashi, A. Sakurai, and S. Aso, «Measurement of heat-transfer coefficients in shock wave-turbulent boundary layer interaction regions with a multi-layered thin film heat transfer gauge», 1986.

G. C. Fralick, J. D. Wrbanek, and C. Blaha, « Thin Film Heat Flux Sensor of Improved Design, 2002.

H. Mocikat and H. Herwig, Heat Transfer Measurements with Surface Mounted Foil-Sensors in an Active Mode: A Comprehensive Review and a New Design, Sensors, vol.44, issue.4, pp.3011-3032, 2009.
DOI : 10.1007/s00231-007-0336-6

URL : http://www.mdpi.com/1424-8220/9/4/3011/pdf

J. W. Post and A. Bhattacharyya, Imran, «Experimental results and a user-friendly model of heat transfer from a thin film resistance temperature detector», pp.116-130, 2009.
DOI : 10.1016/j.applthermaleng.2008.02.009

D. Hamadi, B. Garnier, H. Willaime, F. Monti, and H. Peerhossaini, A novel thin-film temperature and heat-flux microsensor for heat transfer measurements in microchannels, Lab Chip, vol.66, issue.2, pp.652-658, 2012.
DOI : 10.1016/j.ces.2011.04.019

H. Ammar, B. Garnier, A. O. Moctar, H. Willaime, F. Monti et al., Thermal analysis of chemical reactions in microchannels using highly sensitive thin-film heat-flux microsensor, Chemical Engineering Science, vol.94, pp.150-155, 2013.
DOI : 10.1016/j.ces.2013.02.055

B. Azerou, B. Garnier, and J. Launay, Lahmar, «Conception, fabrication et tests de fluxmètres thermiques 1D performants réalisés à partir de dépôts couches minces», proc, 2011.

F. P. D-'aleo, R. Stalder, and H. M. Prasser, «Design and development of resistive temperature detector arrays on aluminium substrates. Measurements in mixing experiments», Flow Meas, Instrum, vol.45, pp.176-187, 2015.

F. P. D-'aleo-et and H. M. , Prasser, «Design, calibration and testing of a thin film temperature gauge array for temperature and heat flux measurements in fluid mixing experiments», Flow Meas, Instrum, vol.24, pp.29-35, 2012.

B. Bourouga, V. Goizet, and J. , Bardon, «Les aspects théoriques régissant l'instrumentation d'un capteur thermique pariétal à faible inertie», Therm. Sci., n° 139, pp.96-109, 2000.
DOI : 10.1016/s1290-0729(00)00192-6

J. Fayreau and E. Georgin, Savanier, «Good practices for the implementation of surface temperature measurements», proc, of International Congress of Metrology, 2015.

H. Trethowen, Measurement errors with surface-mounted heat flux sensors, Building and Environment, vol.21, issue.1, pp.41-56, 1986.
DOI : 10.1016/0360-1323(86)90007-7

G. J. Weir, Surface mounted heat flux sensors, The Journal of the Australian Mathematical Society. Series B. Applied Mathematics, vol.24, issue.03, pp.281-294, 1986.
DOI : 10.1007/BF01535196

URL : https://www.cambridge.org/core/services/aop-cambridge-core/content/view/956F948B296EE6DAEE378140656ABAE0/S0334270000004938a.pdf/div-class-title-surface-mounted-heat-flux-sensors-div.pdf

J. Frim and M. B. Ducharme, Heat flux transducer measurement error: a simplified view, Journal of Applied Physiology, vol.74, issue.4, pp.2040-2044, 1993.
DOI : 10.1152/jappl.1993.74.4.2040

M. L. Matson and T. R. , Reinarts, «Development and calibration of a thermal model of a Schmidt-Boelter gauge to quantify environmental and installation effects on heat flux measurements for launch vehicles», proc, of AIP Conference, pp.119-126, 2002.

Y. Shen, J. He, W. Zhao, T. Sun, K. T. Grattan et al., Fiber-optic sensor system for heat-flux measurement, Review of Scientific Instruments, vol.28, issue.4, pp.1006-1012, 2004.
DOI : 10.1063/1.1475366

A. Medvid and J. Kaupuzs, «Heat-flux sensor», Sensor Actuat. A: Phys, Proc. of Eurosensors, pp.381-383, 1994.

L. W. Langley, A. Barnes, G. Matijasevic, and P. Gandhi, High-sensitivity, surface-attached heat flux sensors, Microelectronics Journal, vol.30, issue.11, pp.1163-1168, 1999.
DOI : 10.1016/S0026-2692(99)00080-4

N. R. Nagaiah, J. S. Kapat, and L. , Novel polymer derived ceramic-high temperature heat flux sensor for gas turbine environment, Journal of Physics: Conference Series, vol.34, pp.458-463, 2006.
DOI : 10.1088/1742-6596/34/1/075

URL : http://iopscience.iop.org/article/10.1088/1742-6596/34/1/075/pdf

A. V. Mityakov, S. Z. Sapozhnikov, V. Y. Mityakov, A. A. Snarskii, M. I. Zhenirovsky et al., Pyrhönen, «Gradient heat flux sensors for high temperature environments», Sensor Actuat, A: Phys, vol.176, pp.1-9, 2012.
DOI : 10.1016/j.sna.2011.12.020

T. Meier, P. Stathopoulos, and P. R. Rohr, Design and convective calibration of a transverse heat flux sensor, Experimental Heat Transfer, vol.3, issue.2, pp.139-150, 2016.
DOI : 10.1016/j.crme.2005.08.002

]. E. Dellali, S. Begot, F. Lanzetta, R. Chutani, E. Gavignet et al., «Design and thermal modeling of a micro-regenerator, proc. of ICREGA, Internal Conference on Renewable Energy: Generation and Applications» Lanzetta et E. Gavignet, «Design, fabrication and CFD modeling of a Stirling engine microregenerator, proc. of 17th International Stirling Engine Conference and Exhibition, pp.24-26, 2016.

J. M. Toonder, A. R. Van-dijken, G. Flik, H. C. Eisenschmid, F. Raudzis et al., «Optimization of mechanical properties of thin free-standing metal films for RF-MEMS», proc Schoenenborn et H. Trah, «Microsensors for automotive applications ? metrology and test», of Materials Research Society Symposium, pp.177-182, 1986.

P. Childs, J. R. Greenwood, and C. A. , Long, «Heat flux measurement techniques», Proc. of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol.2139, pp.17-655, 1999.
DOI : 10.1243/0954406991524471

G. Asch, « Les capteurs en instrumentation industrielle », 7ème édition, Dunod, p.264265, 1983.

A. Zribi, F. Lanzetta, M. Barthès, and S. Bégot, détermination du transfert de chaleur fluide-paroi. Application à l'écoulement de type marche d'escalier», proc. of Troisième Congrès Tunisien de Mécanique, mars, pp.24-26, 2014.

H. M. Prasser and F. P. , Aleo, «Design, calibration and testing of a thin film temperature gauge array for temperature and heat flux measurements in fluid mixing experiments», Flow Measurement and Instrumentation, pp.29-35, 2012.

L. I. Maissel and R. Glang, Handbook of Thin Film Technology, Journal of The Electrochemical Society, vol.118, issue.4, 1970.
DOI : 10.1149/1.2408101

V. Demarne, «Réalisation d'un capteur de gaz intégré sur silicium, étude des mécanismes physico-chimique liés au fonctionnement de ces capteurs, dans le cas de couches minces de dioxyde d'étain pur et dopé», Thèse de l'Ecole Polytechnique Fédérale de Lausanne (EPFL), 1991.

D. Dibartolome and J. H. Klems, «Large-area, high-sensitivity heat-flow sensor», Review of Scientific Instruments, vol.53, 1982.

B. Azerou, «Conception, réalisation et mise en oeuvre de fluxmètres thermiques passif et dynamique à base de couches minces», Thèse de l'Université de Nantes, 2013.

C. Habib, «Conception et réalisation d'une plate-forme multi capteur de gaz conductimétriques, vers le nez électronique intégré», 2007.

. «bruker» and . En, Available: https://www.bruker.com/fr/products/x-ray- diffraction-and-elemental-analysis/x-ray-diffraction/d8-advance/learn-more.html

S. Mahato, N. Shakti, and K. A. , Annealing temperature dependent structural and optical properties of electrodeposited CdSe thin films, Materials Science in Semiconductor Processing, vol.39, pp.742-747, 2015.
DOI : 10.1016/j.mssp.2015.06.019

P. Chelvanathan, Z. Zakaria, Y. Yusoff, M. Akhtaruzzaman, M. M. Alam et al., Annealing effect in structural and electrical properties of sputtered Mo thin film, Applied Surface Science, vol.334, pp.129-137, 2015.
DOI : 10.1016/j.apsusc.2014.08.154

P. Scherrer, «Estimation of size and internal structure of colloidal particles by means of XRD», Göttinger Nachrichten Gesell, vol.2, pp.96-100, 1918.

A. L. Patterson, The Scherrer Formula for X-Ray Particle Size Determination, Physical Review, vol.74, issue.10, pp.978-982, 1939.
DOI : 10.1098/rspa.1938.0079

E. Mortier, S. Jager, and D. Gerdolle, Dahoun, «La microscopie électronique à balayage environnementale : application à l'observation des tissus dentaires minéralisés», pp.221-229, 2011.
DOI : 10.1051/aos/2011305

URL : http://aos.edp-dentaire.fr/10.1051/aos/2011305/pdf

«. S. A» and . En, Available: http://www.tcsa.fr Available: http://uk.tek.com/tektronix-and-keithley-digital- multimeter/keithley-2100-series-6%C2%BD-digit-usb-multimeter. [Accès le 30 septembre 2016]. [4] « Evaluation of measurement data. Guide to the expression of uncertainty in measurement, JCGM, vol.1005, p.2008, 1995.

B. Kuyatt, T. N. , E. Chrisaleo, F. P. Prasser, and H. , « Guidelines for evaluating and expressing the uncertainty of NIST measurement results Grosser, «The impact of annealing temperature and time on the electrical performance of Ti/Pt thin films, Applied Surface Science» Design, calibration and testing of a thin film temperature gauge array for temperature and heat flux measurements in fluid mixing experiments Flow Meas, National Institute of Standards and Technology Asch, « Les capteurs en instrumentation industrielle », Dunod, pp.1256-4564, 1983.

H. Esch, G. Huyberechts, R. Mertens, R. Maes, J. Manca et al., De Schepper, «The stability of Pt heater and temperature sensing elements for silicon integrated tin oxide gas sensors», Sensors Actuat. B: Chemical, n°, vol.165, issue.3, pp.190-192, 2000.
DOI : 10.1016/s0925-4005(99)00301-9

L. Thiery, Application des microcapteurs thermoelectriques en métrologie optothermique, Thèse de l'Université de Franche-Comté, 1994.

F. Lanzetta, Etude des transferts de chaleur instationnaires au sein d'une machine frigorifique de Stirling, Thèse de l'Université de Franche-Comté, 1997.

A. H. Epstein, G. R. Guenette, R. J. Norton, and C. , High???frequency response heat???flux gauge, Review of Scientific Instruments, vol.4, issue.4, pp.639-649, 1986.
DOI : 10.2514/3.1586