M. Ait-ahmed, Contribution à la modélisation géométrique et dynamique des robots parallèles, Thèse de doctorat, 1993.

J. Angeles, S. Caro, W. Khan, and A. Morozov, The Design and Prototyping of an Innovative Schonflies Motion Generator, Proceedings of the Journal of Mechanical Engineering Science, special issue: Kinematics, Kinematic Geometry and their applications, vol.220, issue.C7, pp.935-944, 2006.

J. Angeles, Fundamentals of Robotic Mechanical Systems, Theory, Methods and Algorithms, 2007.

S. R. Ball, Theory of Screws, 1900.

P. Bégon, Commande des robots parallèles rapides : application au robot Hexa, Thèse de doctorat, 1995.

P. Ben-horin and M. Shoham, Singularity analysis of a class of parallel robots based on Grassmann???Cayley algebra, Mechanism and Machine Theory, vol.41, issue.8, pp.4-6, 2005.
DOI : 10.1016/j.mechmachtheory.2006.03.008

P. Ben-horin and M. Shoham, Singularity condition of six-degree-of-freedom three-legged parallel robots based on grassmann-cayley algebra, IEEE Transactions on Robotics, vol.22, issue.4, pp.577-590, 2006.
DOI : 10.1109/TRO.2006.878958

P. Ben-horin, M. Shoham, S. Caro, D. Chablat, and W. Ph, A Graphical user interface for the singularity analysis of parallel robots based on Grassmann-Cayley Algebra Advances in robot kinematics, pp.49-58, 2008.

S. Bhattacharya, H. Hatwal, and A. Ghosh, An on-line parameter estimation scheme for generalized stewart platform type parallel manipulators, Mechanism and Machine Theory, vol.32, issue.1, pp.79-89, 1997.
DOI : 10.1016/0094-114X(96)00018-3

S. Bhattacharya, D. N. Nenchev, and M. Uchiyama, A recursive formula for the inverse of the inertia matrix of a parallel manipulator, Mechanism and Machine Theory, vol.33, issue.7, pp.957-964, 1998.
DOI : 10.1016/S0094-114X(97)00105-5

I. A. Bonev and J. Ryu, Workspace Analysis of 6-PRRS Parallel Manipulators based on the vertex space concept, ASME Design Engineering Technical Conference, 1999.

I. A. Bonev, Delta parallel robot?The story of success " , article en ligne : http://www.parallemic.org/Reviews, 2001.

I. A. Bonev, Geometric Analysis of Parallel Mechanisms, Thèse de doctorat, 2002.

I. A. Bonev, Les robots parallèles : de la recherche vers les applications, Journées Nationales de la Recherche en Robotique, pp.9-12, 2007.

S. Caro, P. Wenger, F. Bennis, and D. Et-chablat, Sensitivity Analysis of the Orthoglide: A Three-DOF Translational Parallel Kinematic Machine, Journal of Mechanical Design, vol.128, issue.2, pp.392-402, 2006.
DOI : 10.1115/1.2166852

D. Chablat, Domaines d'Unicité et Parcourabilité pour les Manipulateurs Pleinement Parallèles, Thèse de Doctorat, 1998.

D. Chablat and W. Ph, Architecture optimization of a 3-DOF translational parallel mechanism for machining applications, the orthoglide, IEEE Transactions on Robotics and Automation, vol.19, issue.3, pp.403-410, 2003.
DOI : 10.1109/TRA.2003.810242
URL : https://hal.archives-ouvertes.fr/hal-00168179

D. Chablat and W. Ph, Device for the movement and orientation of an object in space and use thereof in rapid machining, Demande PCT: WO2004071705, 2004.

D. Chablat and P. Wenger, Design of a Spherical Wrist with Parallel Architecture: Application to Vertebrae of an Eel Robot, Proceedings of the 2005 IEEE International Conference on Robotics and Automation, pp.3347-3352, 2005.
DOI : 10.1109/ROBOT.2005.1570625
URL : https://hal.archives-ouvertes.fr/hal-00162717

S. Charentus and M. Renaud, Modeling and controle of a modular redundant robot manipulator, First International Symposium on Experimental Robotics, 1989.

S. Chen, Dynamic model of a hybrid robot manipulator based on Stewart platform, Robotics: Kinematics, Dynamics and Controls ASME, vol.72, pp.249-253, 1994.

R. Clavel, DELTA, A Fast Robot with Parallel Geometry, Proceedings of 18th international symposium on industrial robots, pp.91-100, 1988.

R. Clavel, Conception d'un robot parallèle rapide à 4 degrés de liberté, Thèse de Doctorat, 1991.

A. Codourey, R. Clavel, and C. W. Burckhardt, CONTROL ALGORITHM AND CONTROLLER FOR THE DIRECT DRIVE DELTA ROBOT, International 3rd IFAC/IFIP/IMAGS Symposium Syroco 91, pp.169-175, 1991.
DOI : 10.1016/B978-0-08-041276-4.50096-0

A. Codourey and E. Burdet, A body-oriented method for finding a linear form of the dynamic equation of fully parallel robots, Proceedings of International Conference on Robotics and Automation, pp.1612-1619, 1997.
DOI : 10.1109/ROBOT.1997.614371

O. Company, F. Pierrot, F. Launay, and C. Fioroni, Modeling and preliminary design issues of a 3-axis parallel machine tool, Proceedings International Conference PKM, pp.14-23, 2000.

O. Company and F. Pierrot, Modelling and design issues of a 3-axis parallel machine-tool, Mechanism and Machine Theory, vol.37, issue.11, pp.1325-1345, 2002.
DOI : 10.1016/S0094-114X(02)00040-X
URL : https://hal.archives-ouvertes.fr/lirmm-00268577

J. J. Craig, Introduction to robotics: mechanics and control, 1986.

. Dasgupta, B. Dasgupta, and T. S. Mruthyunjaya, Closed-Form Dynamic Equations of the General Stewart Platform through the Newton???Euler Approach, Mechanism and Machine Theory, vol.33, issue.7, pp.993-1012, 1998.
DOI : 10.1016/S0094-114X(97)00087-6

. Dasgupta, B. Dasgupta, and T. S. Mruthyunjaya, A Newton-Euler formulation for the inverse dynamics of the Stewart platform manipulator, Mechanism and Machine Theory, vol.33, issue.8, pp.1135-1152, 1998.
DOI : 10.1016/S0094-114X(97)00118-3

A. K. Dashy, S. H. Yeoy, G. Yangz, and I. Cheny, Workspace analysis and singularity representation of three-legged parallel manipulators, 7th International Conference on Control, Automation, Robotics and Vision, 2002. ICARCV 2002., pp.962-967, 2002.
DOI : 10.1109/ICARCV.2002.1238554

B. Dheeman and G. Ashitava, Singularity Analysis of Platform-Type Multi-Loop Spatial Mechanisms, Mechanism and Machine Theory, vol.33, pp.375-389, 1997.

G. Gogu, Structural Synthesis of Parallel Robots, Part 1: Methodology " , Solid Mechanics and its Applications, 2008.

C. M. Gosselin and J. Angeles, Singularity analysis of closed-loop kinematic chains, IEEE Transactions on Robotics and Automation, vol.6, issue.3, pp.281-290, 1990.
DOI : 10.1109/70.56660

C. M. Gosselin, Parallel computationnal algorithms for the kinematics and dynamics of parallel manipulators, IEEE International. Conference on Robotics and Automation, vol.1, pp.883-889, 1993.

C. M. Gosselin and J. Wang, Singular Loci of Planar Parallel Manipulators, 9th World Congress on the Theory of Machines and Mechanisms, 1995.

V. E. Gough and S. G. Whitehall, Universal tyre test machine, Proceedings of the FISITA Ninth International Technical Congress, pp.117-137, 1962.

S. Guegan, Contribution à la modélisation et l'identification dynamique des robots parallèles, Thèse de doctorat, 2003.

P. Gugliemetti and R. Longchamp, A Closed form Inverse Dynamic Model ofthe Delta Parallel Robot, 4th IFAC Symp. on Robot Control, Syroco, pp.51-56, 1994.

J. E. Gwinnett, Amusement device, Brevet américain, vol.789, issue.1, p.680, 1928.

K. Han, W. Chung, and Y. Youm, Local structurization for the forward kinematics of parallel manipulators using extra sensor data, Proceedings IEEE International Conference Robotics, Automation, pp.514-520, 1995.

F. Hao and J. M. Et-mccarthy, Conditions for line-based singularities in spatial platform manipulators, Journal of Robotic Systems, vol.15, issue.1, pp.43-55, 1998.
DOI : 10.1002/(SICI)1097-4563(199812)15:1<43::AID-ROB4>3.0.CO;2-S

R. J. Haugh, F. A. Adkins, and C. M. Luh, Domain of Operation and Interference for Bodies in Mechanisms and Manipulators, Computational Kinematics, pp.193-202, 1995.

J. M. Hervé and F. Sparacino, Structural synthesis of 'parallel' robots generating spatial translation, Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments, pp.808-813, 1991.
DOI : 10.1109/ICAR.1991.240575

R. Hoffman and M. Et-hoffman, Vibrational modes of an aircraft simulator motion system, Proceedings 5th World Congress on Theory of Machines and Mechanisms, pp.603-606, 1979.

J. M. Hollerbach, An iterative lagrangian formulation of manipulators dynamics and a comparative study of dynamics formulation complexity, IEEE Transaction on Systems, Man, and Cybernetics SMC, issue.1011, pp.730-736, 1980.

K. H. Hunt, Kinematic Geometry of Mechanisms, 1978.

K. H. Hunt, Structural Kinematics of In-Parallel-Actuated Robot-Arms, Journal of Mechanisms Transmissions and Automation in Design, vol.105, issue.4, pp.705-7012, 1983.
DOI : 10.1115/1.3258540

O. Ibrahim, W. Khalil, and S. Guegan, Dynamic modeling of some parallel robots, ISR International Symposium. Robotics, 2004.

O. Ibrahim and W. Khalil, Inverse Dynamic Modeling of Serial-Parallel Hybrid Robots, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.2156-2161, 2006.
DOI : 10.1109/IROS.2006.282498

O. Ibrahim and W. Khalil, Kinematic and dynamic modelling of the 3- RPS parallel manipulator, 12 IFToMM World Congress, 2007.

C. Innocenti and V. Et-parenti-castelli, Direct Kinematics of the 6-4 Fully Parallel Manipulator with Position and Orientation Uncoupled, European Robotics and Intelligent Systems Conference, pp.23-28
DOI : 10.1007/978-94-011-2526-0_1

C. Innocenti and V. Parenti-castelli, Direct kinematics of the 6-4 fully parallel manipulator with position and orientation decoupled, Robotic Systems, pp.3-10, 1992.

P. Ji and H. Wu, A closed-form forward kinematics solution for the, pp.6-6

Z. Ji, Study of the effect of leg inertia in Stewart platforms, [1993] Proceedings IEEE International Conference on Robotics and Automation, pp.121-126, 1993.
DOI : 10.1109/ROBOT.1993.291971

J. D. Haug and E. J. , Workspace Analysis of Closed-Loop Mechanisms with Unilateral Constraints, ASME Design and Automation Conference, 1989.

S. A. Joshi and L. W. Tsai, Jacobian analysis of limited-DOF parallel manipulators, ASME Journal of Mechanical Design, issue.124, pp.254-258, 2002.

D. Kanaan, W. Ph, and D. Et-chablat, Workspace Analysis of the Parallel Module of the VERNE Machine, Problems of Mechanics, vol.4, issue.25, pp.26-42, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00160062

D. Kanaan, P. Wenger, and D. Et-chablat, Kinematics analysis of the parallel module of the Verne machine, Proceedings of the 12th IFToMM World Congress, pp.18-21, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00145391

D. Kanaan, P. Wenger, and D. Et-chablat, Workspace and Kinematic Analysis of the Verne machine, Proceedings of IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00164877

D. Kanaan, P. Wenger, and D. Et-chablat, Kinematic analysis of a serial???parallel machine tool: The VERNE machine, Mechanism and Machine Theory, 2008.
DOI : 10.1016/j.mechmachtheory.2008.03.002
URL : https://hal.archives-ouvertes.fr/hal-00342928

D. Kanaan, . Wenger-ph, and D. Et-chablat, Singularity Analysis of Limited-DOF Parallel Manipulators using Grassmann-Cayley Algebra Advances in robot kinematics, pp.59-68, 2008.

W. Khalil and J. Kleinfinger, A new geometric notation for open and closed-loop robots, Proceedings. 1986 IEEE International Conference on Robotics and Automation, pp.1174-1180, 1986.
DOI : 10.1109/ROBOT.1986.1087552

W. Khalil and J. Kleinfinger, Minimum operations and minimum parameters of the dynamic models of tree structure robots, IEEE Journal on Robotics and Automation, vol.3, issue.6, pp.517-526, 1987.
DOI : 10.1109/JRA.1987.1087145

W. Khalil and D. Murareci, Kinematic analysis and singular configurations of a class of parallel robots, Mathematics and Computers in Simulation, vol.41, issue.3-4, pp.377-390, 1996.
DOI : 10.1016/0378-4754(95)00086-0

W. Khalil and D. Creusot, SYMORO+: A system for the symbolic modelling of robots, Robotica, vol.15, issue.2, pp.153-161, 1997.
DOI : 10.1017/S0263574797000180
URL : https://hal.archives-ouvertes.fr/hal-00401687

W. Khalil and S. Besnard, Self calibration of Stewart-Gough parallel robots without extra sensors, IEEE Transactions on Robotics and Automation, vol.15, issue.6, pp.1116-1121, 1999.
DOI : 10.1109/70.817674

W. Khalil, E. Dombre, and . Modeling, identification and control of robots, Hermès Penton, 2002.
URL : https://hal.archives-ouvertes.fr/lirmm-00268633

W. Khalil and S. Guegan, Inverse and Direct Dynamic Modeling of Gough???Stewart Robots, IEEE Transactions on Robotics, vol.20, issue.4, pp.754-762, 2004.
DOI : 10.1109/TRO.2004.829473
URL : https://hal.archives-ouvertes.fr/hal-00401751

W. Khalil and O. Ibrahim, General Solution for the Dynamic Modeling of Parallel Robots, IEEE International Conference on Robotics and Automatio, pp.3665-3670, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00401684

W. Khalil and O. Ibrahim, General Solution for the Dynamic Modeling of Parallel Robots, Journal of Intelligent and Robotic Systems, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00401684

P. K. Khosla, Real-time control and identification of direct drive manipulators, 1986.

H. S. Kim and L. W. Et-tsai, Evaluation of a Cartesian manipulator, Advances in Robot Kinematic

H. S. Kim and L. Tsai, Kinematic Synthesis of a Spatial 3-RPS Parallel Manipulator, Journal of mechanical design, vol.125, pp.92-97, 2003.

J. Kleinfinger and W. Khalil, Dynamic modelling of closed-chain robots, 16th International Symposium on Industrial Robots, pp.401-412, 1986.

]. X. Kong and C. M. Gosselin, Type Synthesis of Linear Translational Parallel Manipulators, pp.453-462, 2002.
DOI : 10.1007/978-94-017-0657-5_48

S. Krut, Contributions à l'étude des robots parallèles légers, 3T-1R et 3T-2R, à forts débattements angulaires, Thèse de Doctorat, 2003.

G. Lebret, G. K. Liu, F. L. Lewis, and D. K. Shah, Dynamic analysis and control of a Stewart platform manipulator Dynamic analysis of a three-degrees-offreedom in-parallel actuated manipulator, Journal of Robotic Systems IEEE Journal of Robotics and Automation, vol.10, issue.4 3, pp.629-655361, 1988.

H. Lipkin and J. Et-duffy, The Elliptic Polarity of Screws, Journal of Mechanisms Transmissions and Automation in Design, vol.107, issue.3, pp.377-387, 1985.
DOI : 10.1115/1.3260725

K. Liu, J. M. Fitzgerald, and F. L. Lewis, Kinematic analysis of a Stewart platform manipulator, IEEE Transactions on Industrial Electronics, vol.40, issue.2, pp.282-293, 1993.
DOI : 10.1109/41.222651

M. Liu, C. Li, and C. Li, Dynamics analysis of the Gough-Stewart platform manipulator, IEEE Transaction on Robotics and Automation, vol.16, issue.1, pp.94-98, 2000.

X. J. Liu, J. S. Wang, F. Gao, and L. P. Wang, On the analysis of a new spatial three-degree-of freedom parallel manipulator, IEEE Trans

J. Y. Luh, M. W. Walker, and R. C. Paul, On-Line Computational Scheme for Mechanical Manipulators, Journal of Dynamic Systems, Measurement, and Control, vol.102, issue.2, pp.69-76, 1980.
DOI : 10.1115/1.3149599

J. Y. Luh and J. F. Zheng, Computation of input generalized forces for robots with closed kinematic chain mechanisms, IEEE Journal on Robotics and Automation, vol.1, issue.2, pp.95-103, 1985.
DOI : 10.1109/JRA.1985.1087008

O. Ma and J. Angeles, Direct kinematics and dynamics of a planar threedof parallel manipulator, ASME Design and Automation Conference, vol.3, pp.313-320, 1989.

O. Ma and J. Angeles, Architecture singularities of platform manipulators, Proceedings. 1991 IEEE International Conference on Robotics and Automation, pp.1542-1547, 1991.
DOI : 10.1109/ROBOT.1991.131835

F. Majou, Analyse Cinétostatique des Machines Parallèles à Translations, Thèse de doctorat de l'Ecole Centrale de Nantes, 2004.

Y. S. Martin, M. Giménez, M. Rauch, and J. Hascoët, A new 5-axes hybrid architecture machining center, 5th Chemnitzer Parallel kinematic Seminar, pp.657-676, 2006.

T. Mcmillan, Invariants of Antisymmetric Tensors, 1990.

J. P. Merlet, Singular Configurations of Parallel Manipulators and Grassmann Geometry, The International Journal of Robotics Research, vol.8, issue.5, 1989.

J. P. Merlet, Direct kinematics of parallel manipulators, IEEE Transactions on Robotics and Automation, vol.9, issue.6, pp.842-846, 1993.
DOI : 10.1109/70.265928

J. Merlet, Determination of the orientation workspace of parallel manipulators, Journal of Intelligent & Robotic Systems, vol.180, issue.1, pp.143-160, 1995.
DOI : 10.1007/BF01254849

J. P. Merlet, Parallel Robots, Solid Dynamics and its Applications, 2000.

J. P. Merlet, An improved design algorithm based on interval analysis for spatial parallel manipulator with specified workspace, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164), pp.23-25, 2001.
DOI : 10.1109/ROBOT.2001.932788

J. Merlet, Parallel robots, 2005.
DOI : 10.1007/978-94-010-9587-7
URL : https://hal.archives-ouvertes.fr/lirmm-00127856

K. Miller and R. Clavel, The Lagrange-based model of Delta-4 robot dynamics, Robotersysteme, vol.8, issue.1, pp.49-54, 1992.

K. Miller, Modeling of dynamics and model-based control of Delta direct-drive parallel robot, Journal of Robotics and Mechatronics, vol.17, issue.4, pp.334-352, 1995.

K. Miller, Optimal Design and Modeling of Spatial Parallel Manipulators, The International Journal of Robotics Research, vol.23, issue.2, pp.127-140, 2004.
DOI : 10.1177/0278364904041322

R. Nair and J. H. Et-maddocks, On the Forward Kinematics of Parallel Manipulators, The International Journal of Robotics Research, vol.180, issue.15, pp.171-188, 1994.
DOI : 10.1177/027836499401300207

Y. Nakamura and M. Ghodoussi, A computational scheme of closed link robot dynamics derived by D'Alembert principle, Proceedings. 1988 IEEE International Conference on Robotics and Automation, pp.1354-1360, 1988.
DOI : 10.1109/ROBOT.1988.12256

C. C. Nguyen, Trajectory planning and control of a Stewart platform base end-effector with passive compliance for part assembly, Journal of Intelligent and Robotic Systems, vol.6, issue.2-3, pp.263-281, 1992.

D. E. Orin and S. Y. Oh, Control of force distrubution in robotic mechanism containing closed kinematic chains, Journal of Dynamic system Measure and Control, vol.102, pp.134-141, 1981.

P. J. Parikh and S. S. Lam, A hybrid strategy to solve the forward kinematics problem in parallel manipulators, IEEE Transactions on Robotics, vol.21, issue.1, pp.18-25, 2005.
DOI : 10.1109/TRO.2004.833801

D. Chablat and P. Et-wenger, Kinematics and Workspace Analysis of a Three-Axis Parallel Manipulator: the Orthoglide, Robotica, vol.24, issue.1, pp.39-49, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00168340

F. Pierrot and A. Fournier, The Delta robot : towards the dynamic control, SIFIR'89, pp.97-101, 1989.

F. Pierrot, Robots pleinement parallèles légers : conception, modélisation et commande, Thèse de doctorat, université Montpellier II, 1991.

F. Pierrot, Parallel mechanisms and redudancy, 1st Int

S. R. Ploen and F. C. Park, Coordinate-invariant algorithms for robot dynamics, IEEE Transactions on Robotics and Automation, vol.15, issue.6, pp.1130-1135, 1999.
DOI : 10.1109/70.817677

W. L. Pollard, Position controlling apparatus, Brevet américain, vol.286, issue.2, p.571, 1938.

A. Pott, D. Franitza, and M. Et-hiller, Orientation workspace verification for parallel kinematic machines with constant legs length, Mechatronics and Robotics Conference, pp.984-989, 2004.

H. Pottmann, M. Peternell, and B. Et-ravani, An introduction to line geometry with applications, Computer-Aided Design, vol.31, issue.1
DOI : 10.1016/S0010-4485(98)00076-1

C. Reboulet and T. Berthomieu, Dynamic models of a six degree of freedom parallel manipulators, Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments, pp.1153-1157, 1991.
DOI : 10.1109/ICAR.1991.240400

M. Renaud, Contribution à la modélisation et à la commande dynamique des robots manipulateurs, Thèse d'état, 1980.

J. Sefrioui and C. M. Gosselin, Singularity analysis and representation of planar parallel manipulators, Robotic and Autonomous Systems, pp.209-224, 1993.
DOI : 10.1016/0921-8890(92)90001-F

E. Staffetti and F. Et-thomas, Analysis of rigid body interactions for compliant motion tasks using the Grassmann-Cayley algebra, Proceedings of the IEEE/RSJ International Conference on Intelligent Robotic System, 2000.

D. Stewart, A platform with six degrees of freedom, Proceedings of the IMechE, pp.371-385, 1965.

K. J. Waldron, M. Raghavan, and B. Et-roth, Kinematics of a Hybrid Series-Parallel Manipulation System, Journal of Dynamic Systems, Measurement, and Control, vol.111, issue.2, pp.211-221, 1989.
DOI : 10.1115/1.3153039

M. Weck and M. Et-staimer, Parallel Kinematic Machine Tools ??? Current State and Future Potentials, CIRP Annals - Manufacturing Technology, vol.51, issue.2, pp.671-683, 2002.
DOI : 10.1016/S0007-8506(07)61706-5

W. Ph, C. Gosselin, and B. Et-maille, A comparative study of serial and parallel mechanism topologies for machine tools, Proceedings of PKM'99, pp.23-32, 1999.

N. White, The Bracket of 2-Extensors, Congressus Numerantium, vol.40, pp.419-428, 1983.

N. White, Grassmann?Cayley algebra and robotics, Journal of Intelligent & Robotic Systems, vol.11, issue.1-2, pp.91-107, 1994.
DOI : 10.1007/BF01258296

N. White, Grassmann-Cayley Algebra and Robotics Applications, Handbook of Geometric Computing. Corrochano E. B, pp.629-656, 2005.
DOI : 10.1007/3-540-28247-5_19

. J. Wittenburg, Dynamics of Systems of Rigid Bodies, Journal of Applied Mechanics, vol.45, issue.2, 1977.
DOI : 10.1115/1.3424342

M. Shoham, Investigation of parallel manipulators using linear complex approximation, ASME Journal of Mechanical Design, vol.125, pp.564-572, 2003.

M. Zein, Analyse Cinématique des Manipulateurs Sériels 3R Orthogonaux et des manipulateurs Parallèles Plans, Thèse de Doctorat, École Centrale de Nantes, 2007.

T. Zhao, J. S. Dai, and Z. Huang, Geometric Analysis of Overconstrained Parallel Manipulators with Three and Four Degrees of Freedom., PUBLICATIONS PERSONNELLES Publications dans des revues internationales avec comités de lecture, pp.730-740, 2002.
DOI : 10.1299/jsmec.45.730

D. Kanaan, P. Wenger, and D. Et-chablat, Workspace Analysis of the Parallel Module of the Verne Machine, Problems of Mechanics N°, vol.425, pp.26-42, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00160062

D. Kanaan, P. Wenger, and D. Et-chablat, Kinematic analysis of a serial???parallel machine tool: The VERNE machine, Mechanism and Machine Theory, pp.sous-presse, 2008.
DOI : 10.1016/j.mechmachtheory.2008.03.002
URL : https://hal.archives-ouvertes.fr/hal-00342928

D. Kanaan, P. Wenger, S. Caro, and D. Et-chablat, Singularity Analysis of Lower Mobility Parallel Manipulators Using Grassmann–Cayley Algebra, IEEE Transactions on Robotics, vol.25, issue.5, 2008.
DOI : 10.1109/TRO.2009.2017132

D. Kanaan, P. Wenger, and D. Et-chablat, Singularity Analysis of Limited-DOF Parallel Manipulators using Grassmann-Cayley Algebra Advances in robot kinematics, pp.59-68, 2008.