initiation entre l'essai d'auto-échauffement et les essais de fatigue. Il n'est donc pas nécessaire de mesurer systématiquement la zone d'initiation pour la mise en place du critère de fatigue. La figure 5.54b montre les régimes observés dans le graphique présentant l'énergie dissipée par cycle au niveau de la zone d'initiation en fonction de l'amplitude d'effort en spécifiant la transition entre le premier et le deuxième régime. Finalement, la figure 5 ,
Critère de fatigue T-Bone 1A (traction) Essais de fatigue classique T-Bone 1A (flexion) Critère de fatigue T-Bone 1A (flexion) Essais de fatigue classique T-Bone 1B (traction) Critère de fatigue T-Bone 1B (traction) Essais de fatigue classique, Bone 1B (flexion) Critère de fatigue T-Bone 1B (flexion) (c) Comparaison des courbes de Wöhler en fonction de ? * ,
Closure approximations for three???dimensional structure tensors, Journal of Rheology, vol.34, issue.3, pp.367-386, 1990. ,
DOI : 10.1122/1.550133
Numerical prediction of three-dimensional fiber orientation in Hele-Shaw flows, Polymer Engineering & Science, vol.7, issue.14, pp.848-859, 1990. ,
DOI : 10.1002/pen.760301408
A comparison of lifetime prediction methods for a thermal fatigue experiment, International Journal of Fatigue, vol.28, issue.7, pp.692-706, 2006. ,
DOI : 10.1016/j.ijfatigue.2005.09.002
URL : https://hal.archives-ouvertes.fr/hal-00111459
Mechanical response of a short fiber-reinforced thermoplastic: Experimental investigation and continuum mechanical modeling, European Journal of Mechanics - A/Solids, vol.29, issue.6, pp.1065-1077, 2010. ,
DOI : 10.1016/j.euromechsol.2010.07.001
URL : https://hal.archives-ouvertes.fr/hal-00524733
Multiscale fatigue damage characterization in short glass fiber reinforced polyamide-66, Composites Part B: Engineering, vol.61, issue.0, pp.6155-65, 2014. ,
DOI : 10.1016/j.compositesb.2014.01.019
URL : https://hal.archives-ouvertes.fr/hal-00973379
Mécanismes d'endommagement du polyamide-66 renforcée par des fibres de verre courtes, soumis à un chargement monotone et en fatigue : Influence de l'humidité relative et de la microstructure induite par le moulage par injection, Thèse de doctorat, ENSAM Paris, 2014. 4 citations pages ix, pp.26-27 ,
Effect of water on the fatigue behaviour of a pa66/glass fibers composite material, Journal of Materials Science, vol.46, issue.23, pp.2181-2188, 2007. ,
DOI : 10.1007/s10853-006-1011-x
Fiber orientation in simple injection moldings. Part I: Theory and numerical methods, Polymer Composites, vol.33, issue.4, pp.317-331, 1992. ,
DOI : 10.1002/pc.750130409
Influence of relative humidity and loading frequency on the PA6.6 cyclic thermomechanical behavior: Part I. mechanical and thermal aspects, Polymer Testing, vol.40, issue.0, pp.290-298 ,
DOI : 10.1016/j.polymertesting.2014.09.019
URL : https://hal.archives-ouvertes.fr/hal-01089675
Kinetics of stored and dissipated energies associated with cyclic loadings of dry polyamide 6.6 specimens, Polymer Testing, vol.34, pp.155-167 ,
DOI : 10.1016/j.polymertesting.2014.01.009
URL : https://hal.archives-ouvertes.fr/hal-00957767
ADVANI : Modeling concepts for the spherulitic growth in polymers and composites, éds : Advanced Polymeric Materials : Structure Property Relathionships. Boca Raton, p.10, 2003. ,
Analisys of the fatigue properties of different specimens of a 10% by weight short glass fibre reinforced polyamide 6.6, Polymer Testing, vol.40, issue.36, pp.149-155, 2014. ,
DOI : 10.1016/j.polymertesting.2014.08.017
Effect of frequency upon fatigue strength of a short glass fiber reinforced polyamide 6: A superposition method based on cyclic creep parameters, Polymer Composites, vol.23, issue.2, pp.154-161, 2009. ,
DOI : 10.1002/pc.20543
Multiaxial fatigue criterion for polypropylene ??? Automotive applications, International Journal of Fatigue, vol.32, issue.8, pp.1389-1392, 2010. ,
DOI : 10.1016/j.ijfatigue.2010.01.008
Infrared Image Processing for the Calorimetric Analysis of Fatigue Phenomena, Experimental Mechanics, vol.1, issue.2, pp.79-90, 2008. ,
DOI : 10.1007/s11340-007-9092-2
URL : https://hal.archives-ouvertes.fr/hal-00572333
Homogénéisation en mécanique des matériaux. (v. 1 & 2) Hermès Science, p.29, 2001. ,
Calorimetric analysis of dissipative and thermoelastic effects associated with the fatigue behavior of steels, International Journal of Fatigue, vol.26, issue.3, pp.221-229, 2004. ,
DOI : 10.1016/S0142-1123(03)00171-3
Deformation mechanisms in crystalline polymers, Journal of Materials Science, vol.30, issue.9, pp.2034-2051, 1974. ,
DOI : 10.1007/BF00540553
Moisture sorption in polyamide 6.6: Experimental investigation and comparison to four physical-based models, Polymer Testing, vol.43, issue.27, pp.10-20, 2015. ,
DOI : 10.1016/j.polymertesting.2015.02.004
URL : https://hal.archives-ouvertes.fr/hal-01126640
Science et génie des matériaux, Canada : Dunod, p.22, 2001. ,
Stiffness and thermal expansion predictions for hybrid short fiber composites, Polymer Composites, vol.31, issue.4, pp.229-239, 1990. ,
DOI : 10.1002/pc.750110406
High-temperature mechanical behavior of semi-crystalline polymers and relationship to a rubber-like ???relaxed??? state, Mechanics of Materials, vol.41, issue.2, pp.75-86, 2009. ,
DOI : 10.1016/j.mechmat.2008.10.001
Cavitation in strained polyvinylidene fluoride: mechanical and X-ray experimental studies, Polymer, vol.41, issue.20, pp.417523-7530, 2000. ,
DOI : 10.1016/S0032-3861(00)00077-X
An infrared image processing to analyse the calorific effects accompanying strain localisation, International Journal of Engineering Science, vol.38, issue.16, pp.1759-1788, 2000. ,
DOI : 10.1016/S0020-7225(00)00002-1
Orthotropic closure approximations for flow???induced fiber orientation, Journal of Rheology, vol.39, issue.6, pp.1095-1122, 1995. ,
DOI : 10.1122/1.550630
Dissipated energy measurements as a marker of microstructural evolution: 316L and DP600, Acta Materialia, vol.59, issue.10, pp.4100-4115 ,
DOI : 10.1016/j.actamat.2011.03.034
The stiffness and strength of a polyamide thermoplastic reinforced with glass and carbon fibres, Journal of Materials Science, vol.5, issue.2, pp.377-390, 1978. ,
DOI : 10.1007/BF00647783
Multiaxial fatigue of a short glass fibre reinforced polyamide 6.6 ??? Fatigue and fracture behaviour, Fourth International Conference on Fatigue of Composites (ICFC4), pp.17-28, 2010. ,
DOI : 10.1016/j.ijfatigue.2009.02.009
Micromechanical modeling and computation of elasto-plastic materials reinforced with distributed-orientation fibers, International Journal of Plasticity, vol.21, issue.10, pp.1919-1940, 2005. ,
DOI : 10.1016/j.ijplas.2004.09.003
Détermination rapide des propriétés en fatigue à grand nombre de cycles à partir d'essais d'échauffement. Thèse de doctorat, Génie mécanique. Génie civil Cachan, Ecole normale supérieure, pp.57-59, 2004. ,
A probabilistic two-scale model for high-cycle fatigue life predictions, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.5, issue.3, pp.279-288, 2005. ,
DOI : 10.1007/BF00553691
URL : https://hal.archives-ouvertes.fr/hal-00322496
Prédiction des propriétés thermo-élastiques d'un composite injecté et chargé de fibres courtes, Thèse de doctorat, p.29, 2006. ,
Modélisation numérique, p.27, 2007. ,
Reprocessing of fiberglass reinforced polyamide 66: Influence on short term properties, Polymer Composites, vol.61, issue.6, pp.823-829, 1996. ,
DOI : 10.1002/pc.10675
The determination of the elastic field of an ellipsoidal inclusion, and related problems, Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences, pp.241376-396, 1226. ,
Introduction à la physique des polymères. Dunod, p.13, 1994. ,
Effet du procédé de compaction isostatique à chaud sur les propriétés à la fatigue polycyclique d'un alliage cuproaluminium de fonderie, Metallurgical Research & Technology, vol.107, issue.2, pp.83-91 ,
Effect of notch and test conditions on the fatigue of a glass-fibre-reinforced polypropylene composite, Composites Science and Technology, vol.57, issue.9-10, pp.1243-1248, 1997. ,
DOI : 10.1016/S0266-3538(97)00052-3
Shear banding in polyamide 6 films as revealed by atomic force microscopy, Polymer, vol.41, issue.4, pp.1561-1569, 2000. ,
DOI : 10.1016/S0032-3861(99)00276-1
Fast Fatigue Properties Identification by ???Self-heating??? Method: Application to Automotive Welded Joints, Fatigue Design 2013, International Conference Procee- dings, pp.676-683, 2013. ,
DOI : 10.1016/j.proeng.2013.12.120
URL : https://hal.archives-ouvertes.fr/hal-00949694
Orientation Behavior of Fibers in Concentrated Suspensions, Journal of Reinforced Plastics and Composites, vol.3, issue.2, pp.98-114, 1984. ,
DOI : 10.1177/073168448400300201
SELL : Localisation des déformations et mécanismes d'endommagement dans les polymères multiphasés, Mécanique et Industries, vol.3, issue.5 11, pp.431-438, 2002. ,
On the post-mortem fracture surface morphology of short fiber reinforced thermoplastics, Composites Part A: Applied Science and Manufacturing, vol.36, issue.7, pp.987-994, 2005. ,
DOI : 10.1016/j.compositesa.2004.11.005
Multiaxial fatigue analysis of orthotropic materials*, Rev. Metall, vol.107, issue.9 3, pp.369-375, 2010. ,
Changes in the morphology of bulk spherulitic nylon 6 due to plastic deformation, Macromolecules, vol.21, issue.9, pp.2761-2770, 1988. ,
DOI : 10.1021/ma00187a021
La thermographie infrarouge. Principes, technologie, p.81, 1984. ,
HAUDIN : Introduction à la mécanique des polymères, INPL, issue.8, 1995. ,
The influence of fiber orientation and stress ratio on the fatigue behavior pf short glass fiber reinforced polymers, Proceedings ANTEC, pp.284-288, 2007. ,
Fatigue characteristics of a glass-fiber-reinforced polyamide, Journal of Applied Polymer Science, vol.5, issue.13, pp.1783-1793, 1999. ,
DOI : 10.1002/(SICI)1097-4628(19990624)72:13<1783::AID-APP14>3.0.CO;2-B
Mise en forme des polymères, cours du CEMEF ,
Constitutive equations in suspension mechanics. Part 1. General formulation, Journal of Fluid Mechanics, vol.48, issue.03, pp.481-495, 1975. ,
DOI : 10.1063/1.1671698
Caractérisation rapide des propriétés en fatigue d'un polymère renforcé par des fibres courtes, pour une application automobile, pp.65-67, 2012. ,
SPOORMAKER : Fatigue fracture mechanisms and fractography of shortglassfibre-reinforced polyamide 6, Journal of Materials Science, vol.32, issue.14, pp.3641-3651, 1997. ,
DOI : 10.1023/A:1018634530869
Effects of time and temperature on the tension-tension fatigue behavior of short fiber reinforced polyamides, Polymer Composites, vol.31, issue.4, pp.408-414, 1998. ,
DOI : 10.1002/pc.10114
Damage behavior in multi-stage fatigue testing of glass-fiber-reinforced polyamide 66, Polymer Composites, vol.54, issue.1, pp.60-81, 2004. ,
DOI : 10.1002/pc.20005
Etude expérimentale et modélisation du comportement en fatigue multiaxiale d'un polymère renforcé pour application automobile, Thèse de doctorat, pp.14-36, 2009. ,
A unified approach to mean stress effect on fatigue threshold conditions, International Journal of Fatigue, vol.17, issue.2, pp.101-106, 1995. ,
DOI : 10.1016/0142-1123(95)95888-N
Fracture micromechanics of polymer materials, p.12, 1981. ,
DOI : 10.1007/978-94-017-1597-3
Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components, International journal of fatigue, vol.22, issue.1, pp.65-73, 2000. ,
Mechanisms of fatigue fracture in short glass fibre-reinforced polymers, Journal of Materials Science, vol.3, issue.5, pp.4015-4030, 1987. ,
DOI : 10.1007/BF01133353
Cyclic behaviour of short glass fibre reinforced polyamide: Experimental study and constitutive equations, International Journal of Plasticity, vol.27, issue.8, pp.1267-1293, 2011. ,
DOI : 10.1016/j.ijplas.2011.02.005
Multiaxial fatigue models for short glass fibre reinforced polyamide. Part II: Fatigue life estimation, International Journal of Fatigue, vol.47, issue.46, pp.390-406, 2013. ,
DOI : 10.1016/j.ijfatigue.2012.09.015
URL : https://hal.archives-ouvertes.fr/hal-00778281
Modelling the influence of temperature and relative humidity on the time-dependent mechanical behaviour of a short glass fibre reinforced polyamide, Mechanics of Materials, vol.56, pp.1-10, 2012. ,
DOI : 10.1016/j.mechmat.2012.08.008
URL : https://hal.archives-ouvertes.fr/hal-00778275
Cyclic approximation of the heat equation in finite strains for the heat build-up problem of rubber, Journal of Mechanics of Materials and Structures, vol.4, issue.2, pp.309-318, 2009. ,
DOI : 10.2140/jomms.2009.4.309
URL : https://hal.archives-ouvertes.fr/hal-00381412
Fatigue and ageing of rubbers under marine and thermal environments : from accelerated tests to structure numerical simulations. Theses, oct. 2010. 7 citations pages xi, pp.59-71 ,
URL : https://hal.archives-ouvertes.fr/tel-00542506
Thermographic detection of fatigue damage of pressure vessel steels at 1,000 Hz and 20 Hz, Scripta Materialia, vol.42, issue.4, pp.389-395, 2000. ,
DOI : 10.1016/S1359-6462(99)00358-9
Essais de fatigue partie i. Techniques de l'ingénieur Essais mécaniques sur les métaux et alliages, base documentaire : TIB531DUO.(ref. article : m4170), pp.2015-2049 ,
Structure and plastic deformation of polyethylene, Journal of Materials Science, vol.43, issue.7, pp.294-323, 1994. ,
DOI : 10.1007/BF01162485
Infrared thermographic scanning of fatigue in metals, Nuclear Engineering and Design, vol.158, issue.2-3, pp.363-376, 1995. ,
DOI : 10.1016/0029-5493(95)01043-H
Fatigue limit evaluation of metals using an infrared thermographic technique, Mechanics of Materials, vol.28, issue.1-4, pp.155-163, 1998. ,
DOI : 10.1016/S0167-6636(97)00047-1
URL : https://hal.archives-ouvertes.fr/hal-00111598
Modélisation du comportement mécanique de matériaux composites viscoélastiques non linéaires par une approche d'homogénéisation, Thèse de doctorat, p.30, 2004. ,
Effect of mean stress on the stress-controlled fatigue of a short E-glass fiber reinforced polyamide-6,6, International Journal of Fatigue, vol.26, issue.9, pp.941-946, 2004. ,
DOI : 10.1016/j.ijfatigue.2004.02.003
Refined experimental methodology for assessing the heat dissipated in cyclically loaded materials at low stress levels, Comptes Rendus M??canique, vol.335, issue.3, pp.168-174, 2007. ,
DOI : 10.1016/j.crme.2007.02.004
Caractérisation multi-axiale du comportement et de la micro-structure d'un semicristallin, E.N.S Cachan, 2003. ,
Dissipation analysis in SFRP structural samples: Thermomechanical analysis and comparison to numerical simulations, Multiaxial Fatigue 2013. 4 citations pages xi, pp.142-150, 2014. ,
DOI : 10.1016/j.ijfatigue.2014.02.004
URL : https://hal.archives-ouvertes.fr/hal-01060009
Micromechanical modeling of self-heating and microplasticity in steels under cyclic loading, Thèse de doctorat, Arts et Métiers ParisTech, déc, p.66, 2007. ,
URL : https://hal.archives-ouvertes.fr/pastel-00003346
Influence of formulation on the fatigue properties of elastomeric materials. Theses, pp.68-69 ,
URL : https://hal.archives-ouvertes.fr/tel-01098577
Determination of dissipated energy fields from temperature mappings on a rubber-like structural sample: Experiments and comparison to numerical simulations, Mechanics of Materials, vol.80, issue.0, pp.113-123 ,
DOI : 10.1016/j.mechmat.2014.09.010
URL : https://hal.archives-ouvertes.fr/hal-01108260
Etude et Modélisation de l'orientation de fibres dans des thermoplastiques renforcés, Thèse de doctorat, pp.13-18, 2005. ,
Effect of water absorption on the plastic deformation behavior of nylon 6, European Polymer Journal, vol.45, issue.3, pp.757-762, 2009. ,
DOI : 10.1016/j.eurpolymj.2008.12.008
Average stress in matrix and average elastic energy of materials with misfitting inclusions, Acta Metallurgica, vol.21, issue.5, pp.571-600, 1973. ,
DOI : 10.1016/0001-6160(73)90064-3
Cyclic Plastic Strain Energy and Fatigue of Metals, pp.45-87, 1965. ,
DOI : 10.1520/STP43764S
Compréhension des mécanisme physique de fatigues dans le PA vierge et renforcé de fibres de verre, Thèse de doctorat, pp.41-42, 2009. ,
Etude de la fatigue des aciers laminés à partir de l'auto-échauffement sous sollicitation cyclique : essais, observations, modélisation et influence d'une prédéformation plastique, Thèse de doctorat, pp.58-59, 2012. ,
Fatigue failure mechanisms of short glass-fiber reinforced nylon 66 based on nonlinear dynamic viscoelastic measurement, Polymer, vol.42, issue.13, pp.5803-5811, 2001. ,
DOI : 10.1016/S0032-3861(00)00897-1
Simulation of small-strain deformations of semi-crystalline polymer: Coupling of structural transformations with stress-strain response, Journal of Materials Science, vol.39, issue.11, pp.3577-3586, 2004. ,
DOI : 10.1023/B:JMSC.0000030709.19754.28
Modélisation micromécanique de composites thermoplastiques élastomères à matrice polypropylène, Thèse de doctorat, 2009. ,
Plastic Deformation of Crystalline Polymers:?? The Role of Cavitation and Crystal Plasticity, Macromolecules, vol.38, issue.23, pp.9688-9697, 2005. ,
DOI : 10.1021/ma050842o
An enhanced affine formulation and the corresponding numerical algorithms for the mean-field homogenization of elasto-viscoplastic composites, International Journal of Plasticity, vol.22, issue.1, pp.131-157, 2006. ,
DOI : 10.1016/j.ijplas.2005.04.001
Multiaxiality, material and stress heterogeneities of self-heating tests and high cycle fatigue tests. Theses, École normale supérieure de Cachan -ENS Cachan, pp.50-66, 2007. ,
URL : https://hal.archives-ouvertes.fr/tel-00200459
The effect of spatial distribution on the effective behavior of composite materials and cracked media, Journal of the Mechanics and Physics of Solids, vol.43, issue.12, pp.1919-1951, 1995. ,
DOI : 10.1016/0022-5096(95)00058-Q
Numerical simulation of fiber orientation in injection of reinforced thermoplastics, Thèse de doctorat, pp.13-20, 2007. ,
URL : https://hal.archives-ouvertes.fr/tel-00332719
Comportement, endommagement et fissuration par fluage du polyamide 6. Etude expérimentale et modélisation, Thèse de doctorat, pp.10-13, 2009. ,
URL : https://hal.archives-ouvertes.fr/tel-00493717
Constitutive modelling of viscoelastic unloading of short glass fibre-reinforced polyethylene, Composites Science and Technology, vol.65, issue.3-4, pp.3-4421, 2005. ,
DOI : 10.1016/j.compscitech.2004.09.010
Testing, Inspection, and Quality Control, éds : Injection Molding Handbook, pp.1028-1126, 2000. ,
DOI : 10.1007/978-1-4615-4597-2_12
SEM observations of the initiation and propagation of cracks in a short fibre-reinforced thermoplastic composite under stress, Journal of Materials Science Letters, vol.13, issue.5, pp.188-190, 1983. ,
DOI : 10.1007/BF00725615
Mechanism of fracture of short glass fibre-reinforced polyamide thermoplastic, Journal of Materials Science, vol.2, issue.4, pp.1145-1152, 1984. ,
DOI : 10.1007/BF01120023
Microfailure behaviour of randomly dispersed short fibre reinforced thermoplastic composites obtained by direct SEM observation, Journal of Materials Science, vol.22, issue.14, pp.3891-3898, 1991. ,
DOI : 10.1007/BF01184987
Approximate analysis of the stress state near the fibre ends of short fibre-reinforced composites and the consequent microfracture mechanisms, Composites Part A: Applied Science and Manufacturing, vol.27, issue.5, pp.357-364, 1996. ,
DOI : 10.1016/1359-835X(95)00037-3
The determination of fatigue limits under alternting stress conditions, Proc. Roy. Soc, pp.411-425, 1914. ,
The effect of aspect ratio of inclusions on the elastic properties of unidirectionally aligned composites, Polymer Composites, vol.9, issue.4, pp.327-333, 1984. ,
DOI : 10.1002/pc.750050413
Précis Matières plastiques , structures-propriétés, mise en oeuvre, normalisation, 1996. ,
Simulation Numérique de l'orientaiton de fibres en moulage par injection de pièces complexes en matériaux composite, Thèse de doctorat, 1995. ,
The effect of the skin thickness and spherulite size on the mechanical properties of injection mouldings, Journal of Materials Science, vol.36, issue.18, pp.4411-4418, 2001. ,
DOI : 10.1023/A:1017970416968
URL : https://hal.archives-ouvertes.fr/hal-00613087
Wöhler's experiments on the strength of metals. 1867, p.65 ,
Fatigue Lives of Short Fiber Reinforced Thermoplastics Parts, Journal of Reinforced Plastics and Composites, vol.20, issue.7, pp.606-620, 2001. ,
DOI : 10.1177/073168401772678625
Cumulative Damage of Short Glass Fiber Reinforced Thermoplastics, Journal of Reinforced Plastics and Composites, vol.20, issue.7, pp.596-605, 2001. ,
DOI : 10.1177/073168401772678616
Modélisation de la cristallisation des polymères dans les procédés de plasturgie : quantification des effets thermiques et rhéologiques, Thèse de doctorat, 2010. ,