R. Normes, A. Nf, and . En, Nf en 9100 -série aérospatiale -système de management de la qualité exigences pour les organismes de l'aéronautique, l'espace et la défense, 2010.

A. N. Abenhaim, A. Desrochers, A. S. Tahan, and J. Et-bigeon, A virtual fixture using a FE-based transformation model embedded into a constrained optimization for the dimensional inspection of nonrigid parts, Computer-Aided Design, vol.62, pp.248-258, 2015.
DOI : 10.1016/j.cad.2014.12.006
URL : https://hal.archives-ouvertes.fr/hal-01114609

A. N. Abenhaim, A. S. Tahan, A. Desrochers, and R. Et-maranzana, A Novel Approach for the Inspection of Flexible Parts Without the Use of Special Fixtures, Journal of Manufacturing Science and Engineering, vol.133, issue.1, pp.1-11, 2011.
DOI : 10.1115/1.4003335

G. N. Abenhaim, Nouvelle méthode d'inspection des pièces flexibles sans gabarit de conformité, Thèse de Doctorat, 2009.

G. N. Abenhaim, A. Desrochers, and A. S. Et-tahan, An Investigation of the Repeatability of Nonrigid Parts Measurements: A Case Study of an Aluminum Panel, 12th CIRP Conference on Computer Aided Tolerancing, pp.105-111, 2012.
DOI : 10.1016/j.procir.2013.08.019

G. N. Abenhaim, A. Desrochers, and A. S. Et-tahan, Nonrigid parts??? specification and inspection methods: notions, challenges, and recent advancements, The International Journal of Advanced Manufacturing Technology, vol.60, issue.7, pp.741-752, 2012.
DOI : 10.1007/s00170-012-3929-2

G. N. Abenhaim, A. S. Tahan, A. Desrochers, and J. Et-lalonde, Aerospace Panels Fixtureless Inspection Methods with Restraining Force Requirements; A Technology Review, SAE Technical Paper Series, 2013.
DOI : 10.4271/2013-01-2172

J. D. Adams and D. E. Whitney, Application of Screw Theory to Constraint Analysis of Mechanical Assemblies Joined by Features, Journal of Mechanical Design, vol.123, issue.1, pp.26-32, 1999.
DOI : 10.1115/1.1334858

P. A. Adragna, Tolérancement des systèmes assemblés, une approche par le tolérancement inertiel et modal, Thèse de Doctorat, 2007.

P. A. Adragna, S. Samper, and H. Et-favreliere, How form errors impact on 2d precision assembly with clearance ? Precision Assembly Technologies and Systems, pp.50-59, 2010.

A. Aidibe, Inspection des pièces flexibles sans gabarit de conformation, Thèse de Doctorat, 2014.

A. Aidibe, A. S. Tahan, and G. N. Et-abenhaim, Distinguishing profile deviations from a part's deformation using the maximum normed residual test, WSEAS Transactions on Applied and Theoretical Mechanics, vol.7, pp.18-28, 2012.

L. Andolfatto, Assistance à l'élaboration de gammes d'assemblage innovantes de structures composites, Thèse de Doctorat, 2013.

B. Anselmetti, ISO manufacturing tolerancing: three-dimensional transfer with analysis line method, The International Journal of Advanced Manufacturing Technology, vol.39, issue.n??14, pp.1085-1099, 2012.
DOI : 10.1007/s00170-011-3769-5

B. Anselmetti and K. Et-mawussi, Cotation fonctionnelle des interfaces entre pièces, 2001.

B. Anselmetti and K. Et-mawussi, Computer Aided Tolerancing Using Positioning Features, Journal of Computing and Information Science in Engineering, vol.3, issue.1, pp.15-21, 2003.
DOI : 10.1115/1.1565074

N. Anwer, A. Ballu, and L. Mathieu, The skin model, a comprehensive geometric model for engineering design, CIRP Annals - Manufacturing Technology, vol.62, issue.1, pp.143-146, 2013.
DOI : 10.1016/j.cirp.2013.03.078

M. A. Ardayfio, Methods for capturing design intent using key characteristics, 1995.

R. Ascione and W. Et-polini, Measurement of nonrigid freeform surfaces by coordinate measuring machine, The International Journal of Advanced Manufacturing Technology, vol.14, issue.1, pp.1055-1067, 2010.
DOI : 10.1007/s00170-010-2684-5

N. Audfray, Une approche globale pour la métrologie 3d automatique multi-systèmes, Thèse de Doctorat, 2012.

N. Audfray, C. Mehdi-souzani, N. Anwer, H. Zhao, and C. Et-lartigue, Méthodes d'identification de caractéristiques géométriques d'un nuage de points issu de la mesure 3d sans contact, 2010.

N. Audfray, C. Mehdi-souzani, and C. Et-lartigue, A Novel Approach for 3D Part Inspection Using Laser-plane Sensors, Procedia CIRP, the 12th CIRP Conference on Computer Aided Tolerancing, pp.23-29, 2013.
DOI : 10.1016/j.procir.2013.08.008

B. Ayadi, B. Anselmetti, Z. Bouaziz, and A. Et-zghal, Three-dimensional modelling of manufacturing tolerancing using the ascendant approach, The International Journal of Advanced Manufacturing Technology, vol.38, issue.1???2, pp.279-290, 2008.
DOI : 10.1007/s00170-007-1225-3

E. Ballot, Lois de comportement géométrique des mécanismes pour le tolérancement, Thèse de Doctorat, 1995.

A. Ballu, Caractérisation et métrologie de la géométrie et des déplacements pour le tolérancement et la biomécanique, 2009.

A. Ballu, Measurement of gap hull for model validation, product verification and maintenance, 11th CIRP Conference on Computer Aided Tolerancing, 2009.

A. Ballu, J. Y. Dantan, and L. Et-mathieu, Tolérancement géométrique des produits -langage de spécification : Geospelling. Editions Hermes-Lavoisier, pp.39-66, 2007.

J. L. Bentley, Multidimensional binary search trees used for associative searching, Communications of the ACM, vol.18, issue.9, pp.509-517, 1975.
DOI : 10.1145/361002.361007

I. Besic, N. Van-gestel, J. P. Kruth, P. Bleys, and J. Et-hodolic, Accuracy improvement of laser line scanning for feature measurements on CMM, Optics and Lasers in Engineering, vol.49, issue.11, pp.1274-1280, 2011.
DOI : 10.1016/j.optlaseng.2011.06.009

P. J. Besl and N. Et-mckay, A method for registration of 3-D shapes, IEEE Transactions on Pattern Analysis and Machine Intelligence, vol.14, issue.2, pp.239-256, 1992.
DOI : 10.1109/34.121791

S. Bhide, G. Ameta, J. K. Davidson, and J. J. Et-shah, Tolerance-maps applied to the straightness and orientation of an axis. Models for Computer Aided Tolerancing in Design and Manufacturing, pp.45-54, 2007.

E. M. Bispo and R. B. Et-fisher, Free-form surface matching for surface inspection, Proceedings of the 6th IMA Conference on the Mathematics of Surfaces, pp.119-136, 1996.

K. Blaedel, B. Swift, A. Claudet, E. Kasper, and S. Et-petterson, Metrology of non-rigid objects, 2002.

P. Bourdet, Chaines de cotes de fabrication (méthode des delta l) : première partie "modèles". L'ingénieur et le technicien de l'enseignement technique, 1973.

P. Bourdet and A. Clement, A Study of Optimal-Criteria Identification Based on the Small-Displacement Screw Model, CIRP Annals - Manufacturing Technology, vol.37, issue.1, pp.503-506, 1988.
DOI : 10.1016/S0007-8506(07)61687-4

F. Boussuge, J. C. Léon, S. Hahmann, and L. Et-fine, An analysis of dmu transformation requirements for structural assembly simulations, The 8th International Conference on Engineering Computational Technology, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00765407

P. Breteau, Simulation d'assemblage flexible par la mesure -application au domaine de l'aéronautique, Thèse de Doctorat, 2009.

J. Bruyère, J. Y. Dantan, R. Bigot, and P. Et-martin, Statistical tolerance analysis of bevel gear by tooth contact analysis and monte carlo simulation. Mechanism and Machine Theory, pp.1326-1351, 2007.

J. N. Buttrick, Shim measurement system and method of operating the same, 2014.

W. Cai, S. J. Hu, and J. X. Et-yuan, Deformable Sheet Metal Fixturing: Principles, Algorithms, and Simulations, Journal of Manufacturing Science and Engineering, vol.118, issue.3, pp.318-324, 1996.
DOI : 10.1115/1.2831031

J. A. Camelio, S. J. Hu, and D. Et-ceglarek, Modeling Variation Propagation of Multi-Station Assembly Systems With Compliant Parts, Journal of Mechanical Design, vol.125, issue.4, pp.673-681, 2003.
DOI : 10.1115/1.1631574

J. A. Camelio, S. J. Hu, and D. Et-ceglarek, Impact of fixture design on sheet metal assembly variation, Journal of Manufacturing Systems, vol.23, issue.3, pp.182-193, 2004.
DOI : 10.1016/S0278-6125(05)00006-3

S. Carmignato, E. Savio, and L. Et-de-chiffre, Ct techniques for reconstructing 3d geometrical models of complex parts : an approach for traceability establishment and uncertainty evaluation, 2nd International Symposium on Measurement, Analysis and Modeling of Human Functions, pp.387-390, 2004.

R. Chavanne, Contribution au tolérancement fonctionnel 3d des mécanismes complexes : synthèse des spécifications et analyse de tolérances, Thèse de Doctorat, 2012.

G. Cid, Etablissement des relations de comportement de mécanismes avec prise en compte des écarts géométriques et des souplesses des composants, Thèse de Doctorat, 2005.

A. Clément, A. Desrochers, and A. Etrivì-ere, Theory and practice of 3d tolerancing for assembly, 2nd CIRP Conference on Computer Aided Tolerancing, pp.25-55, 1991.

P. Clozel, Mecamaster, expertise en conception mécanique pour les bureaux d'etudes, International Conference StruCoMe, pp.757-770, 1990.

A. Contri, Qualité géométrique de la mesure de surfaces complexes par moyens optiques, Thèse de Doctorat, 2002.

A. Contri, P. Bourdet, and C. Et-lartigue, Quality of 3D digitised points obtained with non-contact optical sensors, CIRP Annals - Manufacturing Technology, vol.51, issue.1, pp.443-446, 2002.
DOI : 10.1016/S0007-8506(07)61556-X

T. L. Cung, P. Y. Joubert, and E. Et-vourc-'h, Eddy current evaluation of air???gaps in aeronautical multilayered assemblies using a multi-frequency behavioral model, Measurement, vol.44, issue.6, pp.1108-1116, 2011.
DOI : 10.1016/j.measurement.2011.03.012
URL : https://hal.archives-ouvertes.fr/hal-00832676

J. Y. Dantan, A. Ballu, and L. Mathieu, Geometrical product specifications ??? model for product life cycle, Computer-Aided Design, vol.40, issue.4, pp.493-501, 2008.
DOI : 10.1016/j.cad.2008.01.004

J. Y. Dantan, J. Bruyere, C. Baudouin, and L. Et-mathieu, Geometrical Specification Model for Gear - Expression, Metrology and Analysis, CIRP Annals - Manufacturing Technology, vol.56, issue.1, pp.517-520, 2007.
DOI : 10.1016/j.cirp.2007.05.123
URL : https://hal.archives-ouvertes.fr/hal-00750731

J. Y. Dantan, A. Hassan, A. Etienne, A. Siadat, and P. Et-martin, Information modeling for variation management during the product and manufacturing process design, International Journal on Interactive Design and Manufacturing (IJIDeM), vol.57, issue.5, pp.107-118, 2008.
DOI : 10.1007/s12008-008-0040-x

B. Denkena, H. Ahlers, F. Berg, T. Wolf, and H. K. Et-tönshoff, Fast Inspection of Larger Sized Curved Surfaces by Stripe Projection, CIRP Annals - Manufacturing Technology, vol.51, issue.1, pp.499-502, 2002.
DOI : 10.1016/S0007-8506(07)61570-4

A. Deraemaeker, P. Ladevèze, and S. Et-le-loch, RESULTS OBTAINED BY THE CRE UPDATING METHOD USING A PLATE MODEL, Mechanical Systems and Signal Processing, vol.17, issue.1, pp.47-54, 2003.
DOI : 10.1006/mssp.2002.1538

W. Estler, K. Edmundson, G. Peggs, and D. Et-parker, Large-Scale Metrology ??? An Update, CIRP Annals - Manufacturing Technology, vol.51, issue.2, pp.587-609, 2002.
DOI : 10.1016/S0007-8506(07)61702-8

C. J. Evans, R. J. Hocken, and W. T. Et-estler, Self-Calibration: Reversal, Redundancy, Error Separation, and ???Absolute Testing???, CIRP Annals - Manufacturing Technology, vol.45, issue.2, pp.617-634, 1996.
DOI : 10.1016/S0007-8506(07)60515-0

D. H. Evans, Statistical tolerancing : the state of the art, Journal of Quality Technology, vol.6, pp.188-195, 1974.

H. Favreliere, Tolérancement modal : de la métrologie vers les spécifications, Thèse de Doctorat, 2009.

A. Fleming, Geometric relationships between toleranced features, Artificial Intelligence, vol.37, issue.1-3, pp.403-412, 1988.
DOI : 10.1016/0004-3702(88)90062-8

J. H. Friedman, J. L. Bentley, and R. A. Et-finkel, An Algorithm for Finding Best Matches in Logarithmic Expected Time, ACM Transactions on Mathematical Software, vol.3, issue.3, pp.209-226, 1977.
DOI : 10.1145/355744.355745

F. Gant, P. Rouch, F. Louf, and L. Et-champaney, Definition and updating of simplified models of joint stiffness, International Journal of Solids and Structures, vol.48, issue.5, pp.775-784, 2011.
DOI : 10.1016/j.ijsolstr.2010.11.011

I. Gentilini and K. Et-shimada, Predicting and evaluating the post-assembly shape of thin-walled components via 3D laser digitization and FEA simulation of the assembly process, Computer-Aided Design, vol.43, issue.3, pp.316-328, 2011.
DOI : 10.1016/j.cad.2010.11.004

M. Giordano and D. Et-duret, Clearance space and deviation space, 3rd CIRP Conference on Computer Aided Tolerancing, pp.179-196, 1993.

J. Grandjean, Influence des défauts de forme sur les performances d'assemblages -application aux prothèses totales de hanche, Thèse de Doctorat, 2013.

A. Hassani, N. Aifaoui, A. Benamara, and S. Et-samper, M??thodologie d'analyse et d'optimisation des tol??rances dans un contexte de conception int??gr??e??: TOL_ANALYSES, M??canique & Industries, vol.9, issue.5, pp.381-395, 2009.
DOI : 10.1051/meca/2009002

K. Hirata, T. Yajima, and Y. Et-sonda, Shape inspection method and apparatus, 2009.

Y. S. Hong and T. C. Chang, A comprehensive review of tolerancing research, International Journal of Production Research, vol.30, issue.11, pp.2425-2459, 2002.
DOI : 10.1080/002075499189880

W. Huang and D. Et-ceglarek, Mode-based Decomposition of Part Form Error by Discrete-Cosine-Transform with Implementation to Assembly and Stamping System with Compliant Parts, CIRP Annals - Manufacturing Technology, vol.51, issue.1, pp.21-26, 2002.
DOI : 10.1016/S0007-8506(07)61457-7

X. Huang and P. Et-gu, Cad-model based inspection of sculptured surfaces with datums, International Journal of Production Research, vol.36, pp.1351-1367, 1998.

X. Huang, P. Gu, and R. Et-zernicke, Localization and comparison of two free-form surfaces, Computer-Aided Design, vol.28, issue.12, pp.1017-1022, 1996.
DOI : 10.1016/0010-4485(96)00011-5

J. Jamshidi, A. Kayani, P. Iravani, P. G. Maropoulos, and M. D. Et-summers, Manufacturing and assembly automation by integrated metrology systems for aircraft wing fabrication, Proceedings of the Institution of Mechanical Engineers, pp.25-36, 2010.
DOI : 10.1243/09544054JEM1280

A. Jaramillo, F. Prieto, and P. Et-boulanger, Fixtureless inspection of deformable parts using partial captures, International Journal of Precision Engineering and Manufacturing, vol.4, issue.6, pp.77-83, 2013.
DOI : 10.1007/s12541-013-0012-3

A. E. Jaramillo, P. Boulanger, and F. Et-prieto, On-line 3-D inspection of deformable parts using FEM trained radial basis functions, 2009 IEEE 12th International Conference on Computer Vision Workshops, ICCV Workshops, pp.733-1739, 2009.
DOI : 10.1109/ICCVW.2009.5457492

B. Karp and G. Et-adam, Small gap width measurement with a finite X-ray source, NDT & E International, vol.27, issue.1, pp.21-25, 1994.
DOI : 10.1016/0963-8695(94)90006-X

K. Kase, A. Makinouchi, T. Nakagawa, H. Suzuki, and F. Et-kimura, Shape error evaluation method of free-form surfaces, Computer-Aided Design, vol.31, issue.8, pp.495-505, 1999.
DOI : 10.1016/S0010-4485(99)00046-9

S. R. Kim, S. K. Chang, H. S. Joo, Y. T. Hwang, S. W. Yang et al., Swelling tape for filling gap, 2014.

Z. Kong, R. Kumar, S. Gogineni, Y. Zhou, and D. Et-ceglarek, Mode-based tolerance analysis in multi-station assembly using stream of variation model. Transactions of North American Manufacturing Research Institution of SME, pp.469-476, 2006.

D. Kosmopoulos and T. Varvarigou, Automated inspection of gaps on the automobile production line through stereo vision and specular reflection, Computers in Industry, vol.46, issue.1, pp.49-63, 2001.
DOI : 10.1016/S0166-3615(01)00113-0

J. Kruth, M. Bartscher, S. Carmignato, R. Schmitt, L. De-chiffre et al., Computed tomography for dimensional metrology, CIRP Annals - Manufacturing Technology, vol.60, issue.2, pp.821-842, 2011.
DOI : 10.1016/j.cirp.2011.05.006

H. N. Lê, Influences des défauts decision forme surface le comportement des liaisons : étude expérimentale et théorique, Thèse de Doctorat, 2013.

C. Lacroix, L. Mathieu, F. Thiébaut, M. Douilly, and H. Et-falgarone, Numerical Process Based on Measuring Data for Gap Prediction of an Assembly, Procedia CIRP, 13th CIRP Conference on Computer Aided Tolerancing, pp.97-102, 2015.
DOI : 10.1016/j.procir.2015.04.050
URL : https://hal.archives-ouvertes.fr/hal-01229354

P. Ladevèze, Model updating of complex structures, 1983.

C. Lartigue, A. Contri, and P. Bourdet, Digitised point quality in relation with point exploitation, Measurement, vol.32, issue.3, pp.193-203, 2002.
DOI : 10.1016/S0263-2241(02)00008-8

C. Lartigue, F. Thiebaut, P. Bourdet, and N. Et-anwer, DIMENSIONAL METROLOGY OF FLEXIBLE PARTS: IDENTIFICATION OF GEOMETRICAL DEVIATIONS FROM OPTICAL MEASUREMENTS, Advanced Mathematical and Computational Tools in Metrology VII, pp.196-203, 2006.
DOI : 10.1142/9789812774187_0019
URL : https://hal.archives-ouvertes.fr/hal-01226524

J. Lecompte, O. Legoff, and J. Y. Et-hascoet, Technological form defects identification using discrete cosine transform method, The International Journal of Advanced Manufacturing Technology, vol.257, issue.1, pp.1033-1044, 2010.
DOI : 10.1007/s00170-010-2687-2
URL : https://hal.archives-ouvertes.fr/hal-00633692

D. Lee and A. Et-thornton, The identification and use of key characteristics in the products development process, 1996.

S. Lemes, Validation of numerical simulations by digital scanning of 3d sheet metal objects, Thèse de Doctorat, 2010.

Y. Li and P. Et-gu, Free-form surface inspection techniques state of the art review, Computer-Aided Design, vol.36, issue.13, pp.1395-1417, 2004.
DOI : 10.1016/j.cad.2004.02.009

Y. Li and P. Et-gu, Feature-Based Alignment and Comparison between Portion and Whole of Free-Form Surfaces, CIRP Annals - Manufacturing Technology, vol.54, issue.1, pp.135-138, 2005.
DOI : 10.1016/S0007-8506(07)60067-5

Y. Li and P. Et-gu, Inspection of free-form shaped parts, Robotics and Computer-Integrated Manufacturing, vol.21, issue.4-5, pp.421-430, 2005.
DOI : 10.1016/j.rcim.2004.11.015

B. Lindau, A. Andersson, L. Lindkvist, and R. Et-söderberg, Body in White Geometry Measurements of Non-Rigid Components: A Virtual Perspective, Volume 5: 6th International Conference on Micro- and Nanosystems; 17th Design for Manufacturing and the Life Cycle Conference, pp.497-505, 2012.
DOI : 10.1115/DETC2012-70765

S. C. Liu, S. J. Hu, and T. C. Et-woo, Tolerance Analysis for Sheet Metal Assemblies, Journal of Mechanical Design, vol.118, issue.1, pp.62-67, 1996.
DOI : 10.1115/1.2826857

M. Mahmud, D. Joannic, R. Roy, A. Isheil, and J. Et-fontaine, 3D part inspection path planning of a laser scanner with control on the uncertainty, Computer-Aided Design, vol.43, issue.4, pp.345-355, 2011.
DOI : 10.1016/j.cad.2010.12.014
URL : https://hal.archives-ouvertes.fr/hal-00786785

R. Mantripragada and D. E. Whitney, The Datum Flow Chain: A systematic approach to assembly design and modeling, Research in Engineering Design, vol.65, issue.2, pp.150-165, 1998.
DOI : 10.1007/BF01607157

B. Marguet, Contribution à l'analyse des variations géométriques dans les ensembles structuraux en aéronautique : Démarche et outils, Thèse de Doctorat, 2001.

B. Marguet, H. Falgarone, and N. Et-chevassus, Anatole : un outil d'analyse 3d des variations géométriques pour la conception de produit aéronautique, pp.113-122, 2003.

P. Maropoulos, Y. Guo, J. Jamshidi, and B. Et-cai, Large volume metrology process models: A framework for integrating measurement with assembly planning, CIRP Annals - Manufacturing Technology, vol.57, issue.1, pp.477-480, 2008.
DOI : 10.1016/j.cirp.2008.03.017

P. Maropoulos, P. Vichare, O. Martin, J. Muelaner, M. D. Summers et al., Early design verification of complex assembly variability using a Hybrid ??? Model Based and Physical Testing ??? Methodology, CIRP Annals - Manufacturing Technology, vol.60, issue.1, pp.207-210, 2011.
DOI : 10.1016/j.cirp.2011.03.097

O. C. Martin, J. E. Muelaner, Z. K. Wang, D. Tomlinson, P. G. Maropoulos et al., Metrology enhanced tooling for aerospace (meta) : A live fixturing wing box assembly case study, 7th International Conference on Digital Enterprise Technology, 2011.

S. Martinez, E. Cuesta, J. Barreiro, and B. Et-alvarez, Analysis of laser scanning and strategies for dimensional and geometrical control, The International Journal of Advanced Manufacturing Technology, vol.47, issue.5-8, pp.621-629, 2010.
DOI : 10.1007/s00170-009-2106-8

L. Mathieu, Contribution à la maitrise des variations géométriques des produits le long de leur cycle de vie, Thèse d'Habilitation à Diriger des Recherches, 2007.

L. Mathieu and A. Ballu, Geospelling : A common language for specification and verification to express method uncertainty, Proceedings of 8th CIRP seminar on Computer Aided Tolerancing, pp.70-79, 2003.

L. Mathieu and B. Et-marguet, Integrated Design Method to Improve Producibility based on Product Key Characteristics and Assembly Sequences, CIRP Annals - Manufacturing Technology, vol.50, issue.1, pp.85-88, 2001.
DOI : 10.1016/S0007-8506(07)62077-0

L. Mathieu and F. Et-villeneuve, Tolérancement géométrique des produits, Editions Hermes-Lavoisier, 2007.

C. Mehdi-souzani, F. Thiebaut, and C. Et-lartigue, Scan Planning Strategy for a General Digitized Surface, Journal of Computing and Information Science in Engineering, vol.6, issue.4, pp.331-339, 2006.
DOI : 10.1115/1.2353853
URL : https://hal.archives-ouvertes.fr/hal-01226542

K. G. Merkley, Tolerance analysis of compliant assemblies, Thèse de Doctorat, 1998.

S. Moriere, Contribution à l'étude des assemblages avec prise en compte des défauts de forme : modélisation et expérimentation, Thèse de Doctorat, 2010.

G. Moroni, W. Polini, and M. Et-rasella, Non-rigid free form surface inspection : an aeronautical composite component case study, Proceedings of 10th CIRP Conference on Computer Aided Tolerancing, 2007.

J. E. Mottershead and M. I. Et-friswell, Model Updating In Structural Dynamics: A Survey, Journal of Sound and Vibration, vol.167, issue.2, pp.347-375, 1993.
DOI : 10.1006/jsvi.1993.1340

M. Mounaud, Contribution à l'analyse des défauts géométriques dans le routage d'un réseau hydraulique en aéronautique : Incidences sur la conception, Thèse de Doctorat, 2010.

J. E. Muelaner, A. Kayani, O. Martin, and P. Et-maropoulos, Measurement assisted assembly and the roadmap to part-to-part assembly, 7th International Conference on Digital Enterprise Technology, pp.11-19, 2011.

J. E. Muelaner and P. G. Et-maropoulos, Design for measurement assisted determinate assembly (mada) of large composite structures, Journal of the Coordinate Metrology Systems Conference, vol.5, pp.18-25, 2010.

H. Pahk and W. J. Et-ahn, Precision inspection system for aircraft parts having very thin features based on CAD/CAI integration, The International Journal of Advanced Manufacturing Technology, vol.41, issue.2, pp.442-449, 1996.
DOI : 10.1007/BF01186933

G. N. Peggs, P. G. Maropoulos, E. B. Hughes, A. B. Forbes, S. Robson et al., Recent developments in large-scale dimensional metrology, Proceedings of the Institution of Mechanical Engineers, pp.587-609, 2009.
DOI : 10.1243/09544054JEM1284

J. P. Petit, Spécification géométrique des produits : méthode d'analyse de tolérances. application en conception assistee par ordinateur, Thèse de Doctorat, 2004.

F. Prieto, H. T. Redarce, R. Lepage, and P. Et-boulanger, A non contact cad based inspection system, Quality Control by Artificial Vision, pp.33-38, 1999.

M. Radouani, Contribution à la validation du modèle des chaînes de cotes, Thèse de Doctorat, 2003.

H. Radvar-esfahlan and S. A. Et-tahan, Nonrigid geometric metrology using generalized numerical inspection fixtures, Precision Engineering, vol.36, issue.1, pp.1-9, 2012.
DOI : 10.1016/j.precisioneng.2011.07.002

S. Ravishankar, H. N. Dutt, and B. Et-gurumoorthy, Automated inspection of aircraft parts using a modified ICP algorithm, The International Journal of Advanced Manufacturing Technology, vol.24, issue.2003, pp.227-236, 2010.
DOI : 10.1007/s00170-009-2067-y

A. A. Requicha, Toward a Theory of Geometric Tolerancing, The International Journal of Robotics Research, vol.29, issue.10, pp.45-60, 1983.
DOI : 10.1177/027836498300200403

F. Romdhani, Méthodologie d'estimation des incertitudes d'un processus de mesure utilisant un bras polyarticulé portable, Thèse de Doctorat, 2014.

G. Rosenzveig, Recalage de modèles eléments finis de structures aéronautiques légères en vue de la simulation de leur assemblage, 2011.

M. Saadat, Challenges in the assembly of large aerospace components. Integrated Systems, Design and Technology, pp.37-46, 2011.

M. Saadat and L. Et-cretin, Measurement systems for large aerospace components, Sensor Review, vol.22, issue.3, pp.199-206, 2002.
DOI : 10.1108/02602280210433025

M. Saadat, L. Cretin, R. Sim, and F. Et-najafi, Deformation analysis of large aerospace components during assembly, The International Journal of Advanced Manufacturing Technology, vol.48, issue.9, pp.145-155, 2009.
DOI : 10.1007/s00170-008-1464-y

M. Saadat, R. Sim, and F. Et-najafi, Prediction of geometrical variations in Airbus wingbox assembly, Assembly Automation, vol.27, issue.4, pp.324-332, 2007.
DOI : 10.1108/01445150710827104

S. Samper, Tolérancement et analyse des structures au service des systèmes souples et du défaut de forme, Thèse d'Habilitation à Diriger des Recherches, 2007.

S. Samper, P. A. Adragna, H. Favreliere, and M. Pillet, Modeling of 2D and 3D Assemblies Taking Into Account Form Errors of Plane Surfaces, Journal of Computing and Information Science in Engineering, vol.9, issue.4, pp.1-12, 2009.
DOI : 10.1115/1.3249575
URL : https://hal.archives-ouvertes.fr/hal-00451883

S. Samper and F. Et-formosa, Form Defects Tolerancing by Natural Modes Analysis, Journal of Computing and Information Science in Engineering, vol.7, issue.1, pp.44-51, 2007.
DOI : 10.1115/1.2424247
URL : https://hal.archives-ouvertes.fr/hal-00333036

E. Savio, L. De-chiffre, and R. Schmitt, Metrology of freeform shaped parts, CIRP Annals - Manufacturing Technology, vol.56, issue.2, pp.810-835, 2007.
DOI : 10.1016/j.cirp.2007.10.008

B. Schleich, N. Anwer, L. Mathieu, and S. Et-wartzack, Skin Model Shapes: A new paradigm shift for geometric variations modelling in mechanical engineering, Computer-Aided Design, vol.50, pp.1-15, 2014.
DOI : 10.1016/j.cad.2014.01.001

B. Schleich and S. Et-wartzack, Approaches for the assembly simulation of skin model shapes, Computer-Aided Design, vol.65, pp.18-33, 2015.
DOI : 10.1016/j.cad.2015.03.004

H. Schwenke, U. Neuschaefer-rube, T. Pfeifer, and H. Et-kunzmann, Optical Methods for Dimensional Metrology in Production Engineering, CIRP Annals - Manufacturing Technology, vol.51, issue.2, pp.685-699, 2002.
DOI : 10.1016/S0007-8506(07)61707-7

Y. Segal and F. Et-trichter, Gap width measurements in fuel elements, NDT International, vol.22, pp.222-228, 1989.

N. Shukla, D. Ceglarek, and M. Tiwari, Key characteristics-based sensor distribution in multi-station assembly processes, Journal of Intelligent Manufacturing, vol.47, issue.6, pp.43-58, 2013.
DOI : 10.1007/s10845-013-0759-5

A. Stricher, Tolérancement flexible d'assemblages de grandes structures aéronautiques, Thèse de Doctorat, 2013.

Y. Sun, D. L. Page, J. K. Paik, A. Koschan, and M. A. Et-abidi, Triangle mesh-based edge detection and its application to surface segmentation and adaptive surface smoothing, Proceedings. International Conference on Image Processing, pp.825-828, 2002.
DOI : 10.1109/ICIP.2002.1039099

D. Teissandier, Y. Couétard, A. Gérard, P. Centra, and F. Et-le-breton, Three-dimensional Functional Tolerancing with Proportioned Assemblies Clearance Volume (U.P.E.L : Unions Pond??r??es d???Espaces de Libert??) : application to setup planning, ASME Conference on Engineering Systems Design and Analysis, pp.129-136, 1996.
DOI : 10.1007/978-1-4615-5797-5_13

F. Thiébaut, Contribution à la définition d'un moyen unifié de gestion de la géométrie réaliste basé sur le calcul des lois de comportement des mécanismes, Thèse de Doctorat, 2001.

C. Thiery, Tomographie à rayons x. Techniques de l'ingénieur CND : méthodes globales et volumiques, p.585, 2013.

A. C. Thornton, Key characteristics : To cut variation and manufacturing costs, focus on key characteristics. Association for Manufacturing Excellence, pp.14-19, 1996.

A. C. Thornton, A Mathematical Framework for the Key Characteristic Process, Research in Engineering Design, vol.11, issue.3, pp.145-157, 1999.
DOI : 10.1007/s001630050011

A. C. Thornton, S. Donnelly, and B. Et-ertan, More than Just Robust Design: Why Product Development Organizations Still Contend with Variation and its Impact on Quality, Research in Engineering Design, vol.12, issue.3, pp.127-143, 2000.
DOI : 10.1007/s001630050028

N. Van-gestel, S. Cuypers, P. Bleys, and J. P. Et-kruth, A performance evaluation test for laser line scanners on CMMs, Optics and Lasers in Engineering, vol.47, issue.3-4, pp.336-342, 2009.
DOI : 10.1016/j.optlaseng.2008.06.001

P. Vichare, O. Martin, and J. Et-jamshidi, Dimensional management for aerospace assemblies: framework implementation with case-based scenarios for simulation and measurement of in-process assembly variations, The International Journal of Advanced Manufacturing Technology, vol.224, issue.B6, pp.215-225, 2013.
DOI : 10.1007/s00170-013-5262-9

A. Weckenmann and A. Gabbia, Testing formed sheet metal parts using fringe projection and evaluation by virtual distortion compensation, pp.539-546, 2005.
DOI : 10.1007/3-540-29303-5_71

A. Weckenmann, P. Gall, and A. Gabbia, 3D surface coordinate inspection of formed sheet material parts using optical measurement systems and virtual distortion compensation, Eighth International Symposium on Laser Metrology, pp.640-647, 2005.
DOI : 10.1117/12.611842

A. Weckenmann, X. Jiang, K. D. Sommer, V. Neuschaefer-rube, J. Seewig et al., Multisensor data fusion in dimensional metrology, CIRP Annals - Manufacturing Technology, vol.58, issue.2, pp.701-721, 2009.
DOI : 10.1016/j.cirp.2009.09.008

A. Weckenmann and J. Et-weickmann, Optical inspection of formed sheet metal parts applying fringe projection systems and virtual fixation, Metrology and Measurement Systems, vol.4, pp.321-334, 2006.

A. Weckenmann, J. Weickmann, and N. Et-petrovic, Shortening of inspection processes by virtual reverse deformation, 4th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, pp.391-398, 2007.

D. J. Whitehouse, Some theoretical aspects of error separation techniques in surface metrology, Journal of Physics E: Scientific Instruments, vol.9, issue.7, pp.531-536, 1976.
DOI : 10.1088/0022-3735/9/7/007

D. E. Whitney, M. Anderson, C. Cadet, C. Fine, D. Gossard et al., Agile pathfinders in the aircraft and automobile industries : a progress report, 1995.

H. Zhao, Multisensor integration and discrete geometry processing for coordinate metrology, Thèse de Doctorat, 2010.
URL : https://hal.archives-ouvertes.fr/tel-00451244

S. Zirmi, H. Paris, and I. Et-belaidi, Analyse de la conception d'un montage d'usinage ?? l'aide d'??l??ments modulaires, M??canique & Industries, vol.8, issue.1, pp.1-6, 2007.
DOI : 10.1051/meca:2007017