B. Viii, . Monies, and F. Monies, Positionnements hors interférence pour l'usinage en bout et en roulant de formes gauches, 2001.

. Monies, Determining a collision-free domain for the tool in five-axis machining, International Journal of Production Research, vol.7, issue.21, pp.424513-4530, 2004.
DOI : 10.1007/BF01179412

. Morikawa, 5-axis control tool path generation using curved surface interpolation, JSME International Journal, vol.49, issue.4, 2006.

. Morishige, Collision-free tool path generation using 2-dimensional C-space for 5-axis control machining, The International Journal of Advanced Manufacturing Technology, vol.41, issue.1, pp.393-400, 1997.
DOI : 10.1007/BF01179033

P. Pechard, Génération de trajectoires d'usinage grande vitesse 5 axes par flanc d'outil : intégration d'un critère de fluidité, 2009.

D. Prevost, Modélisation avancée du couple Machine Outil / Commande Numérique dans un contexte UGV pour l'optimisation du calcul de trajectoires multi axes, 2011.

. Redonnet, Optimising Tool Positioning for End-Mill Machining of Free-Form Surfaces on 5-Axis Machines for both Semi-Finishing and Finishing, The International Journal of Advanced Manufacturing Technology, vol.16, issue.6, pp.383-391, 2000.
DOI : 10.1007/s001700050170

. Rehsteiner, F. Renker-]-rehsteiner, and H. Renker, Collision-Free Five-Axis Milling of Twisted Ruled Surfaces, CIRP Annals - Manufacturing Technology, vol.42, issue.1, pp.457-461, 1993.
DOI : 10.1016/S0007-8506(07)62485-8

C. Roberts and R. Rawat, An Approach for Tool Accessibility Evaluation for Multi-axis Machining Models, Computer-Aided Design and Applications, vol.26, issue.1, pp.1-4385, 2007.
DOI : 10.1080/16864360.2007.10738558

W. Rubio, Génération de trajectoires du centre de l'outil pour l'usinage de surfaces complexes sur machinesàmachines`machinesà trois et cinq axes, 1993.

. Rubio, Calculation of tool paths for a torus mill on free-form surfaces on five-axis machines with detection and elimination of interference, The International Journal of Advanced Manufacturing Technology, vol.20, issue.6, pp.13-20, 1998.
DOI : 10.1007/BF01179412

S. Rubrecht, Contibutions to the control of constrained robots, 2011.

. Schmitz, Shrink fit tool holder connection stiffness/damping modeling for frequency response prediction in milling, International Journal of Machine Tools and Manufacture, vol.47, issue.9, pp.1368-1380, 2007.
DOI : 10.1016/j.ijmachtools.2006.08.009

. Senatore, Analysis of improved positionning in five-axis ruled surface milling using envelope surface, Computer- Aided Design, issue.10, pp.37989-998, 2005.

. Song, . Kumar, P. Song, and R. Kumar, A potential field based approach to multirobot manipulation, IEEE International Conference on Robotics and Automation, vol.2, pp.1217-1222, 2002.

. Takeuchi, 5- axis control machining using side-milling cutter, Journal of Advanced Automation Technology, vol.7, issue.1, pp.60-65, 1995.

. Tarbutton, Gougefree voxel-based machining for parallel processors, The International Journal of Advanced Manufacturing Technology, vol.69, pp.9-121941, 2013.

R. Tönshoff, H. Tönshoff, and N. Rackow, Optimal tool positioning for five-axis flank milling of arbitrary shaped surfaces, Annals of the German Academic Society for Production Engineering (WGP), vol.7, issue.1, pp.57-60, 2000.

C. Tournier, ContributionàContribution`Contributionà la conception des formes complexes : La surface d'usinage en fraisage 5 axes isocrête, 2001.

I. Ulrich and J. Borenstein, VFH/sup */: local obstacle avoidance with look-ahead verification, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065), pp.2505-2511, 2000.
DOI : 10.1109/ROBOT.2000.846405

. Umehara, Tool Posture Determination for 5-Axis Control Machining by Area Division Method, JSME International Journal Series C, vol.49, issue.1, pp.35-42, 2006.
DOI : 10.1299/jsmec.49.35

K. Volpe, R. Volpe, and P. Khosla, Manipulator control with superquadric artificial potential functions: theory and experiments, IEEE Transactions on Systems, Man, and Cybernetics, vol.20, issue.6, 1990.
DOI : 10.1109/21.61211

T. Wang, N. Wang, and K. Tang, Automatic generation of gouge-free and angular-velocity-compliant five-axis toolpath, Computer-Aided Design, vol.39, issue.10, pp.39841-852, 2007.
DOI : 10.1016/j.cad.2007.04.003

T. Wang, N. Wang, and K. Tang, Five-axis tool path generation for a flatend tool based on iso-conic partioning, Computer-Aided Design, issue.12, pp.401067-1079, 2008.

. Wang, Graphics-assisted approach to rapid collision detection for multi-axis machining, The International Journal of Advanced Manufacturing Technology, vol.1, issue.6, pp.853-863, 2006.
DOI : 10.1007/s00170-005-0127-5

C. Warren, Global path planning using artificial potential fields Visibility maps and spherical algorithms, IEEE. Computer-Aided Design, vol.26, issue.1, pp.6-16, 1989.
DOI : 10.1109/robot.1989.100007

H. Yau and L. Tsou, Efficient NC Simulation for Multi-Axis Solid Machining With a Universal APT Cutter, Journal of Computing and Information Science in Engineering, vol.9, issue.2, 2009.
DOI : 10.1115/1.3130231

. Zhiwei, Approximate tool posture collision-free area generation for five-axis CNC finishing process using admissible area interpolation, The International Journal of Advanced Manufacturing Technology, vol.13, issue.6, pp.1191-1203, 2012.
DOI : 10.1007/s00170-011-3851-z

L. Zhu, W. Zhu, and Y. Lee, Dexel-based force???torque rendering and volume updating for 5-DOF haptic product prototyping and virtual sculpting, Computers in Industry, vol.55, issue.2, pp.125-145, 2004.
DOI : 10.1016/j.compind.2004.07.003

L. Zhu, W. Zhu, and Y. Lee, Five-axis pencil-cut planning and virtual prototyping with 5-DOF haptic interface, Computer-Aided Design, vol.36, issue.13, pp.1295-1307, 2004.
DOI : 10.1016/j.cad.2004.01.013