]. N. Ginot, M. A. Mannah, C. Batard, and M. , MACHMOUM: Application of power line communication for data transmission over PWM network, IEEE Transactions on Smart Grid, vol.1, pp.2-178, 2010.

M. A. Mannah, C. Batard, N. Ginot, M. N. Machmoum, J. C. Ginot et al., Investigations on power line communicatin technology for motor drive application, International Review of Electrical Engineering, vol.5, issue.9, pp.2-3, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00812042

C. Batard, F. Poitiers, N. Ginot, and C. , Power Line Communication Technologies for Smart Grids, Smart Cars, and Smart Homes MILLET: Simulation of power converters using Matlab-Simulink, dans l'ouvrage "MATLAB -A Fundamental Tool for Scientific Computing and Engineering Applications, pp.43-68, 2012.

[. Antonios, C. Batard, Y. Scuceller, N. Ginot, M. J. Machmoum et al., Methodology for constructing a compact electro-thermal model for IGBT-based power inverters MACHMOUM: Construction of a multi-frequency compact electro-thermal model for IGBT-based power inverters, 14th European Conference on Power Electronics and Applications (EPE) 10 pages Nicolas Ginot, -IV -Bibliographie [BOI01] I. BOIKO: Input-output analysis of limit cycling relay feedback control systems, American Control Conference, pp.542-546, 1999.

J. C. Le-claire, S. Siala, J. Saillard, R. C. Le-doeuffcla02-]-j, . Le et al., A resonant current controller for fast AC voltage regulation, PEVD 2000 conference A resonant voltage controller for fast voltage regulation of a single-phase DC/AC power converter, pp.305-310

]. L. Jae-cheon and S. Myung-won, Procédé et dispositif de commutateurs pour régulation par modulation d'impulsions à fréquence commandable, International patent WO 99, 1925.

. S. Modélisation, N. Raman, W. Sivashankar, W. Milam, S. Stuart et al., Design and implementation of HIL simulators for powertrain control system software development, American Control Conférence BALDA: A versatile laboratory test bench for developing powertrains of electric vehicles, Vehicular Technology Conference, Thèse de doctorat soutenue le 5 décembre, pp.709-713, 1999.

A. Ammous, S. G²hedira, S. B. Allard, H. Morel, and D. Renault, Choosing a thermal model for electrothermal simulation of power semiconductor devices, IEEE Transaction, vol.14, pp.2-300, 1999.
URL : https://hal.archives-ouvertes.fr/hal-00140099

N. Ginotbie01, ]. Mh, . W. Bierhoff-;-f, and . Fuchs, Semiconductor losses in voltage source and current source IGBT converters based on analytical derivation, 35th Annual IEEE Power Electronics Specialists Conference, pp.122-2836

[. Bryant, A. T. Mawby, P. A. Palmer, P. R. Santi, E. Hudgins et al., Exploration of Power Device Reliability Using Compact Device Models and Fast Electrothermal Simulation, IEEE Transactions on Industry Applications, vol.44, issue.3, pp.3-894, 2008.
DOI : 10.1109/TIA.2008.921388

D. , B. Hudgins, J. L. Santi, E. Bryant, A. T. Palmer et al., Transient thermal analysis of power devices based on Fourier-series thermal model, pp.3129-3125, 2008.

G. , Y. C. Castellazzi, A. Wachutka, G. K. Hefner, A. R. Kimball et al., Electrothermal Simulation of Multichip-Modules With Novel Transient Thermal Model and Time-Dependent Boundary Conditions A Dynamic Electro-Thermal Model for the IGBT A method of including switching loss in electro-thermal simulation models: Modeling controlled switches and diodes for electro-thermal simulation, IEEE Workshop on Computers in Power Electronics (COMPEL) RANBIR SINGH: Compact models for silicon carbide power devices, pp.45-55, 1994.

N. Ginotmun01, ]. Munoz, A. R. Lipo, and T. A. , On-Line Dead-Time Compensation Technique for Open-Loop PWM-VSI Drives, IEEE transactions on power electronics, pp.123-127, 1999.

P. , P. R. Joyce, J. C. Eng, P. Y. Hudgins, J. Santi et al., Circuit Simulator Models for the Diode and IGBT With Full Temperature Dependent Features, IEEE transactions, vol.18, p.5, 2003.

[. Williams, B. W. Finney, and S. J. , A Review of IGBT Models, pp.6-1250, 2003.

[. , P. Ciappa, M. Fichtner, and W. , Thermal Component Model for Electrothermal Analysis of IGBT Module Systems, IEEE transactions on advanced packaging, pp.3-401, 2001.

J. Ahola, T. Lindh, V. S. Arkim-aki, and R. , TIAINEN: Modeling the High Frequency Characteristics of Industrial Low Voltage Distribution Network, Nordic Workshop on Power and Industrial Electronics, 2004.

J. [. Ahola, A. Toukonen, T. Kosonen, and . Lindh, Electric motor cable communication overcomes the biggest obstacle in on-line condition monitoring, pp.105-110, 2005.

A. J. Ahola, A. Kosonen, J. Toukonen, T. N. Coakley, and R. C. Kavanagh, LINDH: A new approach to data transmission between an electric motor and an inverter, SPEEDAM Real-time control of a servosystem using the inverter -fed power lines to communicate sensor feedback, IEEE Transactions on Industrial Electronics, vol.46, pp.126-130, 1999.

N. Ginot, ]. E. Cottais, and J. , SAILLARD: Coefficients of LC passive insertion filters for a voltage response analysis, International Journal of Electronics, vol.96, issue.COT01 2, pp.124-139, 2008.

]. A. Characterisationkos01, M. Kosonen, V. Jokinen, J. Särkimäki, . Kos02-]-a et al., AHOLA: Motor feedback speed control by utilizing the motor feeder cable as a communication channel NIEMELA: Real-time induction motor speed control with a feedback utilizing power line communications and a motor feeder cable in data transmission KOSONEN: Power line communication in motor cables of variable-speed electric drives ? analysis and Implementation: Channel model for a power line communication medium in an LVDC distribution system, Thèse de doctoratRAZ01] H. RAZIK: La machine asynchrone à vitesse variable 2 : capteurs, modèles, contrôle et diagnostic, Collection Sciences et technologies de l'énergie électrique WILFRIED: Contribution à l'étude des communications courant porteur haut débit pour l'embarqué, Institut National des Sciences Appliquées de Thèse de doctorat, pp.37-44131, 1999.

W. Y. Weens, N. Idir, R. Bausiere, and J. J. , Modeling and simulation of unshielded and shielded energy cables in frequency and time domains, Modélisation des câbles d'énergies soumis aux contraintes générées par les convertisseurs électroniques de puissance Thèse de Doctorat, pp.1876-1882, 2006.
DOI : 10.1109/TMAG.2006.874306

N. Ginot, ]. P. Van-rensburg, and H. C. Ferreira, Coupling circuitry: understanding the functions of different components, 7th international symposium on power-line communications and its applications, p.125

B. O. Bilal, E. Liu, Y. Gao, and T. O. , KORHONEN: Design of broadband coupling circuits for powerline communication, p.31, 2004.

V. I. Utkin, J. Guldner, and J. Shi, Sliding mode control on electro-mechanical systems, Mathematical Problems in Engineering, vol.8, issue.4-5, 1999.
DOI : 10.1080/10241230306724

S. Buso, S. Fasolo, L. Malesani, and P. Mattavelli, A dead-beat adaptive hysteresis current control, IEEE Transactions on Industry Applications, vol.36, issue.4, pp.1174-1180, 2000.
DOI : 10.1109/28.855976

A. B. Rey, S. De-pablo, J. M. Ruiz, and J. A. Ravelo, A novel current control strategy for PWM inverters using the sliding mode techniques, 7th IEEE International Power Electronics Congress. Technical Proceedings. CIEP 2000 (Cat. No.00TH8529), pp.276-279
DOI : 10.1109/CIEP.2000.891426

J. C. Le-claire, A new resonant voltage controller for fast AC voltage regulation of a single-phase DC/AC power converter, Proceedings of the Power Conversion Conference-Osaka 2002 (Cat. No.02TH8579), pp.1067-1072
DOI : 10.1109/PCC.2002.998120

N. Ginot, J. C. Le-claire, and L. Loron, Active loads for hardware in the loop emulation of electro-technical bodies, 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005., pp.6-10, 2005.
DOI : 10.1109/IECON.2005.1569062

J. C. Le-claire, J. Saillard, S. Siala, and R. L. Doeuf, Method and Device for Controlling Switches in a Control System with Variable Structure, with Controllable Frequency, U.S. patent number, vol.6376, p.935, 2002.

J. C. Le-claire, S. Siala, J. Saillard, and R. L. Doeuff, A new pulse modulation for voltage supply inverter's current control, Proceedings of the 8th European Conference on Power Electronics and Applications, 1999.

H. Bühler, Réglage par mode de glissement, Presses Polytechnique Romandes, 1986.

I. Boiko, Input-output analysis of limit cycling relay feedback control systems, Proceedings of the American Control Conference, California, 1999.

P. M. Fabis, D. Shum, and H. Windischmann, Thermal modeling of diamondbased power electronics packaging, 15th Annual IEEE Semiconductor Thermal Measurement and Management Symposium, 1999.

B. Du, J. L. Hudgins, E. Santi, A. T. Bryant, P. R. Palmer et al., Transient electro?thermal simulation of power semiconductor devices, IEEE Trans. Power Electron, vol.25, issue.1, pp.237-248, 2010.

S. M. 'rad, B. Allard, X. , and M. Vellvehi, An experimentally verified compact transient electro-thermal modeling procedure for power modules, IEEE EPE, European Conference on Power Electronics and Applications, pp.1-8, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00369425

Q. Chen, X. Yang, W. Zhaoan, L. Zhang, and M. Zheng, Thermal Design Considerations for Integrated Power Electronics Modules based on Temperature Distribution Cases Study, 2007 IEEE Power Electronics Specialists Conference, pp.1029-1035, 2007.
DOI : 10.1109/PESC.2007.4342133

M. N. Sabry, W. Fikry, K. Sabram, M. Awad, and A. Nasser, A lumped transient thermal model for self-heating in MOSFETs, Microelectron, J, pp.32-847, 2001.

L. Codecasa, D. Dario, P. Amore, and . Maffezzoni, Thermal networks for electrothermal analysis of power devices, Microelectron, J, vol.32, pp.817-822, 2001.

Y. C. Gerstenmaier, W. Kiffe, and G. Wachutka, Combinaison of thermal subsystems by use of rapid circuit transformation and extended two-ports theory, Microelectron, J, pp.40-66, 2009.

H. and G. Stehfest, Algorithm 368: Numerical inversion of Laplace transforms [D5], Communications of the ACM, vol.13, issue.1, pp.47-49, 1970.
DOI : 10.1145/361953.361969

L. Yonge, The home plug powerline alliance and home plug AV overviews, Proc. IEEE Int. Symp. Power Line Commun, pp.9-10, 2006.

H. Meng, S. Chen, Y. L. Guan, C. L. Law, P. L. So et al., Modeling of Transfer Characteristics for the Broadband Power Line Communication Channel, IEEE Transactions on Power Delivery, vol.19, issue.3, pp.1057-1064, 2004.
DOI : 10.1109/TPWRD.2004.824430

A. Majumder and J. Caffrey, Power line communications: an overview, IEEE Potentials, vol.23, issue.4, pp.4-13, 2004.
DOI : 10.1109/MP.2004.1343222

S. Chen, E. Zhong, and T. A. Lipo, A new approach to motor condition monitoring in induction motor drives, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting, pp.905-911, 1994.
DOI : 10.1109/IAS.1993.298883

R. Tiainen, V. Saïrkimaïki, T. Lindh, and J. Ahola, Estimation of the data transfer requirements of vibration and temperature measurements in induction motor condition monitoring, 2005 European Conference on Power Electronics and Applications, pp.10-10, 2005.
DOI : 10.1109/EPE.2005.219710

N. G. Coakley and R. C. Kavanagh, Real-time control of a servosystem using the inverter-fed power lines to communicate sensor feedback, IEEE Transactions on Industrial Electronics, vol.46, issue.2, pp.360-369, 1999.
DOI : 10.1109/41.753775

M. A. Mannah, C. Batard, N. Ginot, and M. Machmoum, Investigations on power line communication technology for motor drive application, Int. Rev. Elect. Eng, vol.5, issue.2, pp.542-551, 2010.

Y. H. Ma, P. L. So, and E. Gunawan, Performance Analysis of OFDM Systems for Broadband Power Line Communications Under Impulsive Noise and Multipath Effects, IEEE Transactions on Power Delivery, vol.20, issue.2, pp.674-682, 2005.
DOI : 10.1109/TPWRD.2005.844320

J. Anatory, N. Theethayi, and R. Thottappillil, Effects of Multipath on OFDM Systems for Indoor Broadband Power-Line Communication Networks, IEEE Transactions on Power Delivery, vol.24, issue.3, pp.1190-1197, 2009.
DOI : 10.1109/TPWRD.2009.2014281

N. Ginot, M. A. Mannah, C. Batard, and M. Machmoum, Application of Power Line Communication for Data Transmission Over PWM Network, IEEE Transactions on Smart Grid, vol.1, issue.2, pp.178-185, 2010.
DOI : 10.1109/TSG.2010.2053225
URL : https://hal.archives-ouvertes.fr/hal-00813171

M. A. Mannah, C. Batard, N. Ginot, and M. Machmoum, Power line communication over feeder cables in an industrial application, Proc. IEEE Int. Symp. Power Line Commun, pp.255-260, 2009.

J. Ahola, A. Kosonen, J. Toukonen, and T. Lindh, A new approach to data transmission between an electric motor and an inverter, International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006., pp.126-130, 2006.
DOI : 10.1109/SPEEDAM.2006.1649757

A. Kosonen, M. Jokinen, J. Ahola, N. Niemelä, and J. Toukonen, Ethernet-based broadband power line communication between motor and inverter, IET Electric Power Applications, vol.2, issue.5, pp.316-324, 2008.
DOI : 10.1049/iet-epa:20070435

C. Konaté, A. Kosonen, J. Ahola, M. Machmoum, and J. F. Diouris, Power Line Communication in Motor Cables of Inverter-Fed Electric Drives, IEEE Transactions on Power Delivery, vol.25, issue.1, pp.125-131, 2010.
DOI : 10.1109/TPWRD.2009.2035279

E. J. Bartolucci and B. H. Finke, Cable design for PWM variable-speed AC drives, IEEE Transactions on Industry Applications, vol.37, issue.2, pp.415-422, 2001.
DOI : 10.1109/28.913704