B. Agostini, Etude expérimentale de l'ébullition de fluide réfrigérant en convection forcée dans des mini-canaux, Thèse de doctorat, 2002.

B. Agostini, M. Fabbri, J. E. Park, L. Wojtan, J. R. Thome et al., State of the Art of High Heat Flux Cooling Technologies, Heat Transfer Engineering, vol.9, issue.4, pp.258-281, 2007.
DOI : 10.1147/rd.466.0739

B. Agostini, R. Revellin, and J. R. Et-thome, Elongated bubbles in microchannels. Part I: Experimental study and modeling of elongated bubble velocity, International Journal of Multiphase Flow, vol.34, issue.6, pp.590-601, 2008.
DOI : 10.1016/j.ijmultiphaseflow.2007.07.007

F. Agostini, Boiling on a Tube Bundle : Heat Transfer, Pressure Drop and Flow Patterns, Thèse de doctorat, 2008.

L. Antoni, Les piles à combustible, École Énergies et Recherches -23 mars 2006 (CEA), 2006.
URL : https://hal.archives-ouvertes.fr/hal-00140959

O. Baker, Simultaneous flow of oil and gas, Oil and Gas Journal, vol.53, pp.185-195, 1954.

A. Barajas and R. Et-paton, The effects of contact angle on two-phase flow in capillary tubes, International Journal of Multiphase Flow, vol.19, issue.2, pp.337-346, 1993.
DOI : 10.1016/0301-9322(93)90007-H

C. Baroczy, Correlation of liquid fraction in two-phase flow with application to liquid metals, Chemical Engineering Progress Symposium series, issue.57, pp.61179-191, 1965.
DOI : 10.2172/4742622

C. Baroczy, A systematic correlation for two-phase pressure drop, Chemical Engineering Progress Symposium series, vol.62, pp.232-249, 1966.

R. Bavière, Etude de l'hydrodynamique et des transferts de chaleur dans des microcanaux, Thèse de doctorat, 2005.

R. Bavière, M. Favre-marinet, and S. Et-le-person, Bias effects on heat transfer measurements in microchannel flows, International Journal of Heat and Mass Transfer, vol.49, issue.19-20, pp.3325-3337, 2006.
DOI : 10.1016/j.ijheatmasstransfer.2006.03.014

A. Bergles, J. Lienhard, G. Kendall, and P. Griffith, Boiling and Evaporation in Small Diameter Channels, Heat Transfer Engineering, vol.4, issue.1, pp.18-40, 2003.
DOI : 10.1016/S0017-9310(99)00023-X

A. Bergles and W. Et-rohsenow, The Determination of Forced-Convection Surface-Boiling Heat Transfer, Journal of Heat Transfer, vol.86, issue.3, pp.365-372, 1964.
DOI : 10.1115/1.3688697

S. Bertsch, E. Groll, and S. Et-garimella, Effects of heat flux, mass flux, vapor quality, and saturation temperature on flow boiling heat transfer in microchannels, International Journal of Multiphase Flow, vol.35, issue.2, pp.142-154, 2009.
DOI : 10.1016/j.ijmultiphaseflow.2008.10.004

R. Bhide, S. Singh, A. Sridharan, S. Duttagupta, and A. Et-agrawal, Pressure drop and heat transfer characteristics of boiling water in sub-hundred micron channel, Experimental Thermal and Fluid Science, vol.33, issue.6, pp.963-975, 2009.
DOI : 10.1016/j.expthermflusci.2009.04.004

J. Bigot, Etude du refroidissement diphasique d'une pile à combustible de traction automobile, Thèse de doctorat, 2005.

H. Blasius, Das Ahnlichkeitsgesetz bei Reibungsvorgangen in Flussigkeiten, 1913.

D. Butterworth, A comparison of some void-fraction relationships for co-current gas-liquid flow, International Journal of Multiphase Flow, vol.1, issue.6, pp.845-850, 1975.
DOI : 10.1016/0301-9322(75)90038-5

V. Carey, Liquid-Vapor Phase Change Phenomena, 2008.

J. C. Chen, Correlation for boiling heat transfer to satured fluids in convective flow, IEC Process Design and Development, pp.322-329, 1966.

P. Chen, Y. Lee, and T. Chang, Predicting thermal instability in a closed loop pulsating heat pipe system, Applied Thermal Engineering, vol.29, issue.8-9, pp.1566-1576, 2009.
DOI : 10.1016/j.applthermaleng.2008.07.007

P. Cheng, H. Wu, and F. Hong, Phase-Change Heat Transfer in Microsystems, Journal of Heat Transfer, vol.129, issue.2, pp.101-108, 2007.
DOI : 10.1115/1.2410008

D. Chisholm, Pressure gradients due to friction during the flow of evaporating two-phase mixtures in smooth tubes and channels, International Journal of Heat and Mass Transfer, vol.16, issue.2, pp.347-358, 1973.
DOI : 10.1016/0017-9310(73)90063-X

D. Chisholm and A. Laird, Two-phase flow in rough tubes, Transactions of the ASME, vol.80, pp.276-286, 1958.

K. Choi, A. Pamitran, J. Oh, and K. Saito, Pressure drop and heat transfer during two-phase flow vaporization of propane in horizontal smooth minichannels, International Journal of Refrigeration, vol.32, issue.5, pp.837-845, 2009.
DOI : 10.1016/j.ijrefrig.2008.12.005

A. Cicchitti, C. Lombardi, M. Silvestri, G. Soldaini, and R. Et-zavattarelli, Two-phase cooling experimentals -pressure drop, heat transfer and burnout measurements, Energia Nucleare, vol.7, issue.6, pp.407-425, 1960.

C. Colebrook, TURBULENT FLOW IN PIPES, WITH PARTICULAR REFERENCE TO THE TRANSITION REGION BETWEEN THE SMOOTH AND ROUGH PIPE LAWS., Journal of the Institution of Civil Engineers, vol.11, issue.4, pp.133-156, 1939.
DOI : 10.1680/ijoti.1939.13150

C. Colin, H. Yoshikawa, D. Legendre, and M. Et-montout, Hydrodynamics of bubble detachment in convective boiling, 7th ECI International conference on boiling heat transfer, 2009.

J. Collier and J. R. Et-thome, Convective boiling and condensation, 1994.

L. Consolini, Convective Boiling Heat Transfer in a Single Micro-Channel, Thèse de doctorat, 2008.

E. Davis and G. Et-anderson, The incipience of nucleate boiling in forced convection flow, AIChE Journal, vol.12, issue.4, pp.774-780, 1966.
DOI : 10.1002/aic.690120426

C. Desrats, Etude expérimentale de l'ébullition d'hydrocarburbures dans les échangeurs à plaques et ailettes Analyse des écoulements et des transferts de chaleur par une approche locale, Thèse de doctorat, 2006.

C. Diaz and J. Et-schmidt, Experimental investigation of transient boiling heat transfer in microchannels, International Journal of Heat and Fluid Flow, vol.28, issue.1, pp.95-102, 2007.
DOI : 10.1016/j.ijheatfluidflow.2006.05.008

P. Dittus and L. Et-boelter, Heat transfer in automobile radiators of the tubular type, International Communications in Heat and Mass Transfer, vol.12, issue.1, pp.443-461, 1930.
DOI : 10.1016/0735-1933(85)90003-X

V. Dupont and J. R. Et-thome, Evaporation in microchannels: influence of the channel diameter on heat transfer, Microfluidics and Nanofluidics, vol.29, issue.2, pp.119-127, 2005.
DOI : 10.1007/s10404-004-0019-2

H. Forster and N. Et-zuber, Dynamics of vapor bubbles and boiling heat transfer, AIChE Journal, vol.1, issue.4, pp.531-535, 1955.
DOI : 10.1002/aic.690010425

L. Friedel, Improved friction pressure drop correlations for horizontal and vertical two-phase pipe flow, European Two-phase Flow Group Meeting Paper E2, pp.485-492, 1979.

W. Fritz, Berechnung des maximal Volume von Dampfblasen, Phys. Z, vol.36, pp.379-388, 1935.

W. Frost and G. Et-dzakowic, An extension of the methods of predicting incipient boiling on commercially finished surfaces, ASME, éditeur : National Heat Transfer Conference, pp.67-61, 1967.

X. Fu, P. Zhang, and R. Wang, Visualization of flow boiling of liquid nitrogen in a vertical mini-tube, International Journal of Multiphase Flow, vol.34, issue.4, pp.333-351, 2007.
DOI : 10.1016/j.ijmultiphaseflow.2007.10.014

G. Gamrat, Modélisation de l'hydrodynamique et des transferts de chaleur dans des microcanaux à parois rugueuses, 2007.

P. Gao, L. Person, S. Et-favre-marinet, and M. , Scale effects on hydrodynamics and heat transfer in two-dimensional mini and microchannels, International Journal of Thermal Sciences, vol.41, issue.11, pp.101-1027, 2002.
DOI : 10.1016/S1290-0729(02)01389-3
URL : https://hal.archives-ouvertes.fr/hal-00204622

K. Geisler and A. Et-bar-cohen, Confinement effects on nucleate boiling and critical heat flux in buoyancy-driven microchannels, International Journal of Heat and Mass Transfer, vol.52, issue.11-12, pp.2427-2436, 2009.
DOI : 10.1016/j.ijheatmasstransfer.2009.02.001

S. Ghiaasiaan and R. Et-chedester, Boiling incipience in microchannels, International Journal of Heat and Mass Transfer, vol.45, issue.23, pp.4599-4606, 2002.
DOI : 10.1016/S0017-9310(02)00167-9

V. Gnielinski, New equations for heat and mass transfer in turbulent pipe and channel flow, International Chemical Engineering, vol.16, pp.359-368, 1976.

R. Grönnerud, Investigation in liquid holdup, flow resistance and heat transfer in circular type evaporators, part IV : Two-phase resistance in boiling refrigerant, 1972.

K. E. Gungor and R. H. Et-winterton, A general correlation for flow boiling in tubes and annuli, International Journal of Heat and Mass Transfer, vol.29, issue.3, pp.351-358, 1986.
DOI : 10.1016/0017-9310(86)90205-X

T. Harirchian and S. Et-garimella, The critical role of channel cross-sectional area in microchannel flow boiling heat transfer, International Journal of Multiphase Flow, vol.35, issue.10, pp.904-913, 2009.
DOI : 10.1016/j.ijmultiphaseflow.2009.06.005

T. Harirchian and S. V. Et-garimella, Microchannel size effects on local flow boiling heat transfer to a dielectric fluid, International Journal of Heat and Mass Transfer, vol.51, issue.15-16, pp.3724-3735, 2008.
DOI : 10.1016/j.ijheatmasstransfer.2008.03.013

M. I. Hasan, A. Raged, M. Yaghoubi, and H. Et-homayoni, Influence of channel geometry on the performance of a counter flow microchannel heat exchanger, International Journal of Thermal Sciences, vol.48, issue.8, pp.1607-1618, 2009.
DOI : 10.1016/j.ijthermalsci.2009.01.004

G. Hetsroni, A. Mosyak, E. Pogrebnyak, and Z. Segal, Periodic boiling in parallel micro-channels at low vapor quality, International Journal of Multiphase Flow, vol.32, issue.10-11, pp.1141-1159, 2006.
DOI : 10.1016/j.ijmultiphaseflow.2006.06.005

P. Hrnjak and X. Tu, Single phase pressure drop in microchannels. Heat and Fluid Flow, pp.2-14, 2006.
DOI : 10.1016/j.ijheatfluidflow.2006.05.005

Y. Hsu, On the Size Range of Active Nucleation Cavities on a Heating Surface, Journal of Heat Transfer, vol.84, issue.3, pp.207-213, 1962.
DOI : 10.1115/1.3684339

C. Huh, J. Kim, and M. H. Kim, Flow pattern transition instability during flow boiling in a single microchannel, International Journal of Heat and Mass Transfer, vol.50, issue.5-6, pp.1049-1060, 2007.
DOI : 10.1016/j.ijheatmasstransfer.2006.07.027

X. Huo, L. Chen, Y. S. Tian, and T. Et-karayiannis, Flow boiling and flow regimes in small diameter tubes, Applied Thermal Engineering, vol.24, issue.8-9, pp.1225-1239, 2004.
DOI : 10.1016/j.applthermaleng.2003.11.027

E. Jassim and T. Et-newell, Prediction of two-phase pressure drop and void fraction in microchannels using probabilistic flow regime mapping, International Journal of Heat and Mass Transfer, vol.49, issue.15-16, pp.2446-2457, 2006.
DOI : 10.1016/j.ijheatmasstransfer.2006.01.034

J. Judy, D. Maynes, and B. Webb, Characterization of frictional pressure drop for liquid flows through microchannels, International Journal of Heat and Mass Transfer, vol.45, issue.17, pp.3477-3489, 2002.
DOI : 10.1016/S0017-9310(02)00076-5

S. G. Kandlikar, A General Correlation for Saturated Two-Phase Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes, Journal of Heat Transfer, vol.112, issue.1, pp.219-228, 1990.
DOI : 10.1115/1.2910348

S. G. Kandlikar, Fundamental issues related to flow boiling in minichannels and microchannels, Experimental Thermal and Fluid Science, vol.26, issue.2-4, pp.389-407, 2002.
DOI : 10.1016/S0894-1777(02)00150-4

S. G. Kandlikar, Nucleation characteristics and stability considerations during flow boiling in microchannels, Experimental Thermal and Fluid Science, vol.30, issue.5, pp.441-447, 2006.
DOI : 10.1016/j.expthermflusci.2005.10.001

S. G. Kandlikar and P. Et-balasubramanian, An Extension of the Flow Boiling Correlation to Transition, Laminar, and Deep Laminar Flows in Minichannels and Microchannels, Heat Transfer Engineering, vol.120, issue.3, pp.86-93, 2003.
DOI : 10.1115/1.2911393

S. G. Kandlikar and P. Et-balasubramanian, An Experimental Study on the Effect of Gravitational Orientation on Flow Boiling of Water in 1054??197?????m Parallel Minichannels, Journal of Heat Transfer, vol.127, issue.8, pp.820-829, 2005.
DOI : 10.1115/1.1928911

Y. Katto and H. Et-ohno, An improved version of the generalized correlation of critical heat flux for the forced convective boiling in uniformly heated vertical tubes, International Journal of Heat and Mass Transfer, vol.27, issue.9, pp.1641-1648, 1984.
DOI : 10.1016/0017-9310(84)90276-X

P. Kew and K. Et-cornwell, Correlations for the prediction of boiling heat transfer in small-diameter channels, Applied Thermal Engineering, vol.17, issue.8-10, pp.705-715, 1997.
DOI : 10.1016/S1359-4311(96)00071-3

S. Kline and F. Et-mcclintok, Describing uncertainties in single-sample experiments, Mechanical Engineering, vol.75, pp.3-8, 1953.

M. J. Kohl, S. I. Abdel-khalik, S. M. Jeter, and D. L. Et-sadowski, An experimental investigation of microchannel flow with internal pressure measurements, International Journal of Heat and Mass Transfer, vol.48, issue.8, pp.481518-1533, 2005.
DOI : 10.1016/j.ijheatmasstransfer.2004.10.030

C. Kuo and Y. Et-peles, Local measurement of flow boiling in structured surface microchannels, International Journal of Heat and Mass Transfer, vol.50, issue.23-24, pp.4513-4526, 2007.
DOI : 10.1016/j.ijheatmasstransfer.2007.03.047

S. Kutateladze, Boiling heat transfer, International Journal of Heat and Mass Transfer, vol.4, pp.31-45, 1961.
DOI : 10.1016/0017-9310(61)90059-X

Q. Lancereau, Étude numérique d'une convection forcée en régime laminaire monophasique dans un micro-canal. Rapport technique, 2008.

C. Y. Lee and S. Y. Et-lee, Influence of surface wettability on transition of two-phase flow pattern in round mini-channels, International Journal of Multiphase Flow, vol.34, issue.7, pp.706-711, 2008.
DOI : 10.1016/j.ijmultiphaseflow.2008.01.002

H. J. Lee and S. Y. Et-lee, Heat transfer correlation for boiling flows in small rectangular horizontal channels with low aspect ratios, International Journal of Multiphase Flow, vol.27, issue.12, pp.2043-2062, 2001.
DOI : 10.1016/S0301-9322(01)00054-4

H. Lee and S. Et-lee, Pressure drop correlations for two-phase flow within horizontal rectangular channels with small heights, International Journal of Multiphase Flow, vol.27, issue.5, pp.783-796, 2001.
DOI : 10.1016/S0301-9322(00)00050-1

J. Lee and I. Et-mudawar, Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part I??????pressure drop characteristics, International Journal of Heat and Mass Transfer, vol.48, issue.5, pp.928-940, 2005.
DOI : 10.1016/j.ijheatmasstransfer.2004.09.018

J. Lee and I. Et-mudawar, Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part II???heat transfer characteristics, International Journal of Heat and Mass Transfer, vol.48, issue.5, pp.941-955, 2005.
DOI : 10.1016/j.ijheatmasstransfer.2004.09.019

J. Lee and I. Et-mudawar, Fluid flow and heat transfer characteristics of low temperature twophase micro-channel heat sinks part 2. subcooled boiling pressure drop and heat transfer, International Journal of Heat and Mass Transfer, pp.4327-4341, 2008.

P. Lee and S. V. Et-garimella, Thermally developing flow and heat transfer in rectangular microchannels of different aspect ratios, International Journal of Heat and Mass Transfer, vol.49, issue.17-18, pp.3060-3067, 2006.
DOI : 10.1016/j.ijheatmasstransfer.2006.02.011

H. Li, F. Tseng, and C. Et-pan, Bubble dynamics in microchannels. Part II: two parallel microchannels, International Journal of Heat and Mass Transfer, vol.47, issue.25, pp.5591-5606, 2004.
DOI : 10.1016/j.ijheatmasstransfer.2004.02.032

D. Liu, P. Lee, and S. Et-garimella, Prediction of the onset of nucleate boiling in microchannel flow, International Journal of Heat and Mass Transfer, vol.48, issue.25-26, pp.5134-5149, 2005.
DOI : 10.1016/j.ijheatmasstransfer.2005.07.021

Z. Liu and R. H. Et-winterton, A general correlation for satured and subcooled flow boiling in tubes and annuli, based on nucleation pool boiling equation, International Journal of Heat and Mass Tranfer, vol.24, pp.51-56, 1990.

R. Lockhart and R. Et-martinelli, Proposed correlation of data for isothermal two-phase, two-component flow in pipes, Chemical Engineering Progress, vol.45, issue.1, pp.39-48, 1949.

F. Longa, L'étude des effets d'échelle lors d'une ébullition en micro-canal, 2008.

J. Mandhane, G. Gregory, and K. Et-aziz, A flow pattern map for gas???liquid flow in horizontal pipes, International Journal of Multiphase Flow, vol.1, issue.4, pp.537-553, 1974.
DOI : 10.1016/0301-9322(74)90006-8

G. Maranzana, L. Perry, and D. Et-maillet, Mini- and micro-channels: influence of axial conduction in the walls, International Journal of Heat and Mass Transfer, vol.47, issue.17-18, pp.3993-4004, 2004.
DOI : 10.1016/j.ijheatmasstransfer.2004.04.016

C. Martin-callizo, B. Palm, and W. Et-owhaib, Subcooled flow boiling of R-134a in vertical channels of small diameter, International Journal of Multiphase Flow, vol.33, issue.8, pp.822-832, 2007.
DOI : 10.1016/j.ijmultiphaseflow.2007.02.002

S. Mcphail, Single-Phase Fluid Flow and Heat Transfer, Thèse de doctorat, 2007.

A. Megahed and I. Et-hassan, Two-phase pressure drop and flow visualization of FC-72 in a silicon microchannel heat sink, International Journal of Heat and Fluid Flow, vol.30, issue.6, pp.1171-1182, 2009.
DOI : 10.1016/j.ijheatfluidflow.2009.07.006

S. S. Mehendale and A. M. Et-jacobi, Fluid flow and heat tranfer at micro-and meso-scales with application to exchanger design, Applied Mechanical Engineering, vol.53, pp.175-193, 2000.

K. Mishima and T. Et-hibiki, Some characteristics of air-water two-phase flow in small diameter vertical tubes, International Journal of Multiphase Flow, vol.22, issue.4, pp.703-712, 1996.
DOI : 10.1016/0301-9322(96)00010-9

H. Müller-steinhagen and K. Et-heck, A simple friction pressure drop correlation for two-phase flow in pipes, Chemical Engineering and Processing: Process Intensification, vol.20, issue.6, pp.297-308, 1986.
DOI : 10.1016/0255-2701(86)80008-3

L. Moody, Friction factors for pipe flow, Transactions of the ASME, vol.66, pp.671-684, 1944.

V. Niño, Characterization of two-phase flow in microchannels, 2002.

S. Nukiyama, The maximum and minimum values of the heat Q transmitted from metal to boiling water under atmospheric pressure, International Journal of Heat and Mass Transfer, vol.9, issue.12, pp.53-54367, 1934.
DOI : 10.1016/0017-9310(66)90138-4

C. Ong and J. R. Et-thome, Flow boiling heat transfer of R134a, R236fa and R245fa in a horizontal 1.030mm circular channel, Experimental Thermal and Fluid Science, vol.33, issue.4, pp.651-663, 2009.
DOI : 10.1016/j.expthermflusci.2009.01.002

C. Y. Park and P. Et-hrnajk, Flow Boiling Heat Transfer, Pressure Drop, and Flow Pattern for CO[sub 2] in a 3.5???mm Horizontal Smooth Tube, Journal of Heat Transfer, vol.131, issue.9, pp.1501-1512, 2009.
DOI : 10.1115/1.2909079

B. Petukhov and V. Et-popov, Theoretical calculation of heat exchange in turbulent flow in tubes of an incompressible fluid with variable physical properties, High Temp, vol.1, pp.69-83, 1963.

H. Phan, N. Caney, P. Marty, S. Colasson, and J. Garvillet, Surface wettability control by nanocoating: The effects on pool boiling heat transfer and nucleation mechanism, International Journal of Heat and Mass Transfer, vol.52, issue.23-24, pp.5459-5471, 2009.
DOI : 10.1016/j.ijheatmasstransfer.2009.06.032
URL : https://hal.archives-ouvertes.fr/hal-00648032

D. Premoli, A. Francesco, and A. Et-prina, A dimensional correlation for evaluating twophase mixture density, pp.17-26, 1971.

W. Qu and I. Et-mudawar, Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink, International Journal of Heat and Mass Transfer, vol.45, issue.12, pp.2549-2565, 2001.
DOI : 10.1016/S0017-9310(01)00337-4

W. Qu and I. Et-mudawar, Prediction and measurement of incipient boiling heat flux in micro-channel heat sinks, International Journal of Heat and Mass Transfer, vol.45, issue.19, pp.3933-3945, 2002.
DOI : 10.1016/S0017-9310(02)00106-0

W. Qu and I. Et-mudawar, Measurement and prediction of pressure drop in two-phase micro-channel heat sinks, International Journal of Heat and Mass Transfer, vol.46, issue.15, pp.2737-2753, 2003.
DOI : 10.1016/S0017-9310(03)00044-9

N. Refprop-7, Reference fluid thermodynamic and transport properties, 2002.

R. Revellin, B. Agostini, T. Ursenbacher, and J. R. Et-thome, Experimental investigation of velocity and length of elongated bubbles for flow of R-134a in a 0.5mm microchannel, Experimental Thermal and Fluid Science, vol.32, issue.3, pp.870-881, 2008.
DOI : 10.1016/j.expthermflusci.2007.10.006
URL : https://hal.archives-ouvertes.fr/hal-00353268

R. Revellin and J. R. Et-thome, Adiabatic two-phase frictional pressure drops in microchannels, Experimental Thermal and Fluid Science, vol.31, issue.7, pp.673-685, 2006.
DOI : 10.1016/j.expthermflusci.2006.07.001

R. Revellin and J. R. Et-thome, A theoretical model for the prediction of the critical heat flux in heated microchannels, International Journal of Heat and Mass Transfer, vol.51, issue.5-6, pp.5-61216, 2008.
DOI : 10.1016/j.ijheatmasstransfer.2007.03.002

G. Ribatski, L. Wojtan, and J. R. Et-thome, An analysis of experimental data and prediction methods for two-phase frictional pressure drop and flow boiling heat transfer in micro-scale channels, Experimental Thermal and Fluid Science, vol.31, issue.1, pp.1-19, 2006.
DOI : 10.1016/j.expthermflusci.2006.01.006

W. Rohsenow, J. Harnett, and Y. Et-cho, Handbook of heat transfer, 1998.

S. Saisorn and S. Et-wongwise, The effects of channel diameter on flow pattern, void fraction and pressure drop of two-phase air???water flow in circular micro-channels, Experimental Thermal and Fluid Science, vol.34, issue.4, pp.454-462, 2010.
DOI : 10.1016/j.expthermflusci.2009.02.006

S. Saitoh, H. Daiguji, and E. Et-hihara, Effect of tube diameter on boiling heat transfer of R-134a in horizontal small-diameter tubes, International Journal of Heat and Mass Transfer, vol.48, issue.23-24, pp.4973-4984, 2005.
DOI : 10.1016/j.ijheatmasstransfer.2005.03.035

T. Sato and H. Et-matsumura, On the Conditions of Incipient Subcooled-Boiling with Forced Convection, Bulletin of JSME, vol.7, issue.26, pp.392-398, 1964.
DOI : 10.1299/jsme1958.7.392

M. M. Shah, A new correlation for heat transfer during boiling flow through pipes, Transactions of the ASHRAE, vol.82, pp.66-86, 1976.

R. Shah and A. Et-london, Laminar flow in forces convection ducts Advances in Heat Transfer, 1978.

R. Shah and D. Et-sékulic, Fundamentals of heat exchanger design, 2003.
DOI : 10.1002/9780470172605

S. Shen, J. Xu, J. Zhou, and Y. Et-chen, Flow and heat transfer in microchannels with rough wall surface. Energy conversion and management, pp.1311-1325, 2006.

E. Sobierska, R. Kulenovic, and R. Et-mertz, Heat transfer mechanism and flow pattern during flow boiling of water in a vertical narrow channel???experimental results, International Journal of Thermal Sciences, vol.46, issue.11, pp.1172-1181, 2007.
DOI : 10.1016/j.ijthermalsci.2007.06.011

M. E. Steinke and S. G. Et-kandlikar, Control and effect of dissolved air in water during flow boiling in microchannels, International Journal of Heat and Mass Transfer, vol.47, issue.8-9, pp.1925-1935, 2004.
DOI : 10.1016/j.ijheatmasstransfer.2003.09.031

M. E. Steinke and S. G. Et-kandlikar, Single-phase liquid friction factors in microchannels, International Journal of Thermal Sciences, vol.45, issue.11, pp.1073-1083, 2006.
DOI : 10.1016/j.ijthermalsci.2006.01.016

B. Stutz, La nucléation In Le changement de phase liquide-vapeur et ses applications, 2003.

Y. Taitel and A. Et-dukler, A model for predicting flow regime transitions in horizontal and near horizontal gas-liquid flow, AIChE Journal, vol.22, issue.1, pp.47-55, 1976.
DOI : 10.1002/aic.690220105

J. Thom, Prediction of pressure drop during forced circulation boiling of water, International Journal of Heat and Mass Transfer, vol.7, issue.7, pp.709-724, 1964.
DOI : 10.1016/0017-9310(64)90002-X

J. R. Thome, Boiling in microchannels: a review of experiment and theory, International Journal of Heat and Fluid Flow, vol.25, issue.2, pp.128-139, 2004.
DOI : 10.1016/j.ijheatfluidflow.2003.11.005

J. R. Thome, Engineering data book III, 2006.

T. N. Tran, M. Chyu, M. W. Wambsganss, and D. M. Et-france, Two-phase pressure drop of refrigerants during flow boiling in small channels: an experimental investigation and correlation development, International Journal of Multiphase Flow, vol.26, issue.11, pp.1739-1754, 2000.
DOI : 10.1016/S0301-9322(99)00119-6

T. N. Tran, M. W. Wambsganss, and D. M. Et-france, Small circular- and rectangular-channel boiling with two refrigerants, International Journal of Multiphase Flow, vol.22, issue.3, pp.485-498, 1996.
DOI : 10.1016/0301-9322(96)00002-X

K. A. Triplett, S. Ghiaasiaan, S. I. Abdel-khalik, and D. L. Et-sadowski, Gas???liquid two-phase flow in microchannels, International Journal of Multiphase Flow, vol.25, issue.3, pp.395-410, 1999.
DOI : 10.1016/S0301-9322(98)00055-X

D. Tuckermann and R. Et-pease, High-performance heat sinking for VLSI, IEEE Electron Device Letters, vol.2, issue.5, 1981.
DOI : 10.1109/EDL.1981.25367

A. Ullman and N. Et-brauner, The prediction of flow pattern maps in mini-channels, 4th Japanese-European Two-Phase Flow Group Meeting, pp.24-28, 2006.

. Valdenaire, Création d'un programme d'acquisition de données dans le cadre de l'étude des écoulements diphasiques aux petites échelles. Rapport technique, IUT -Mesures Physiques, 2008.

B. Wahdame, Analyse et optimisation du fonctionnement de piles à combustible par la méthode des plans d'expériences, Thèse de doctorat, 2006.

G. Wallis, One-Dimensional Two-Phase Flow, 1965.

G. Wang, P. Cheng, and H. Wu, Unstable and stable flow boiling in parallel microchannels and in a single microchannel, International Journal of Heat and Mass Transfer, vol.50, issue.21-22, pp.50-71, 2007.
DOI : 10.1016/j.ijheatmasstransfer.2007.01.033

R. Wang, L. Cong, and M. Et-kido, Evaluation of the wettability of metal surfaces by micro-pure water by means of atomic force microscopy, Applied Surface Science, vol.191, issue.1-4, pp.74-84, 2002.
DOI : 10.1016/S0169-4332(02)00147-2

R. L. Webb and N. S. Et-gupte, A Critical Review of Correlations for Convective Vaporization in Tubes and Tube Banks, Heat Transfer Engineering, vol.7, issue.3, pp.58-81, 1992.
DOI : 10.1016/0017-9310(86)90130-4

L. Wojtan, R. Revellin, and J. R. Et-thome, Investigation of saturated critical heat flux in a single, uniformly heated microchannel, Experimental Thermal and Fluid Science, vol.30, issue.8, pp.765-774, 2006.
DOI : 10.1016/j.expthermflusci.2006.03.006

H. Wu and P. Cheng, Visualization and measurements of periodic boiling in silicon microchannels, International Journal of Heat and Mass Transfer, vol.46, issue.14, pp.2603-2614, 2003.
DOI : 10.1016/S0017-9310(03)00039-5

T. Yen, M. Shoji, F. Takemura, Y. Suzuki, and N. Et-kasagi, Visualization of convective boiling heat transfer in single microchannels with different shaped cross-sections, International Journal of Heat and Mass Transfer, vol.49, issue.21-22, pp.3884-3894, 2006.
DOI : 10.1016/j.ijheatmasstransfer.2005.12.024

S. You, T. Simon, A. Bar-cohen, and Y. Hong, Effects of Dissolved Gas Content on Pool Boiling of a Highly Wetting Fluid, Journal of Heat Transfer, vol.117, issue.3, pp.687-692, 1995.
DOI : 10.1115/1.2822631

R. Yun, J. H. Heo, and Y. Kim, Evaporative heat transfer and pressure drop of R410A in microchannels, International Journal of Refrigeration, vol.29, issue.1, pp.92-100, 2006.
DOI : 10.1016/j.ijrefrig.2005.08.005

W. Zhang, T. Hibiki, and K. Et-mishima, Correlation for flow boiling heat transfer in mini-channels, International Journal of Heat and Mass Transfer, vol.47, issue.26, pp.5749-5763, 2004.
DOI : 10.1016/j.ijheatmasstransfer.2004.07.034

S. Zivi, Estimation of Steady-State Steam Void-Fraction by Means of the Principle of Minimum Entropy Production, Journal of Heat Transfer, vol.86, issue.2, pp.247-252, 1964.
DOI : 10.1115/1.3687113

N. Zuber and J. Et-findlay, Average Volumetric Concentration in Two-Phase Flow Systems, Journal of Heat Transfer, vol.87, issue.4, pp.453-468, 1965.
DOI : 10.1115/1.3689137