É. Par and R. , 25 2.8.2.1. L'équation de transfert radiatif et l'équation de conservation de l'énergie Formulation des facteurs entre deux surfaces, p.35

P. Damier and ». , 42 3.3.2. Avantages de la méthode, ., p.43

.. Choix-du-pavage-et-calcul-des-facteurs-de-transfert, 43 3.4.2. Préparation des données avant simulation44 3.4.2.1. Scénarios de chargement et positions

.. Démarche-générale, 49 3.4.3.3. Echanges éléments fixes ? brames, p.54

.. Démarche-de-validation, 57 3.5.3.1. Gain en temps de calcul, ., p.70

P. Milla and G. , « Fours de réchauffage de la sidérurgie », Techniques de l'ingénieur BE 8843, traité Génie énergétique, 1998.

P. «. Gérard, Éléments thermiques des fours », Techniques de l'ingénieur BE 9510, traité Génie énergétique, 1997.

F. «. Ludovic, Modélisation et expérimentation des fours de réchauffage sidérurgiques équipés de brûleurs régénératifs à Oxydation sans Flamme, 2003.

M. Gasdallah, J. Henriette, and Y. Delpature, «Modelling of a slab reheating furnace retrofitted with regenerative burners», 6 th Europeen conference on industrial furnaces and boilers, Portugal, 2002.

K. S. Chapman, S. Ramadhyani, and R. Viskanta, Modeling and parametric studies of heat transfer in a direct-fired continuous reheating furnace, Metallurgical Transactions B, vol.33, issue.86, pp.513-521, 1991.
DOI : 10.1007/BF02654290

E. M. Sparrow, « On the Calculation of Radiant Interchange between Surfaces », Modern Developments in Heat Transfer p.181, 1963.

J. R. Howell, Thermal Radiation in Participating Media: The Past, the Present, and Some Possible Futures, Journal of Heat Transfer, vol.110, issue.4b, 1988.
DOI : 10.1115/1.3250622

P. Marino, A. Pignotti, and D. Solis, Control of Pusher Furnaces for Steel slab Reheating Using A Numerical Model», Latin American Applied Research, vol.34, pp.249-255, 2004.

H. Erturk, O. A. Ezekoye, and J. R. Howell, Boundary Condition Design to Heat a Moving Object at Uniform Transient Temperature Using Inverse Formulation, Journal of Manufacturing Science and Engineering, vol.126, issue.3, 2004.
DOI : 10.1115/1.1763179

K. S. Chapman, S. Ramadhyani, and R. Viskanta, « Modeling and Analysis of Heat Transfer in a Direct-Fired Batch Furnace», National Heat Transfer Conference, Heat transfer Phenomena in Radiation, Combustion and Fires, 1989.

K. Kostur, «The Analysis of Optimal Production Conditions in a Pushing Furnace», pp.33-36, 1997.

K. Kohlgruber, «Optimization of the Energy Input Into Industrial Furnaces» Gas Warme Int, pp.68-70, 1987.

R. J. Tucker and J. Ward, «Mathematical modelling of heat transfer in a gas-fired reheating furnace operating under non-steady state conditions, Proc 9th Int. Heat Transfer Conf. Jerusalem, pp.221-226, 1990.

K. El and . Khoury, « Calcul des Facteurs de Forme et des longueurs moyennes de rayon par la méthode des flux plans », rapport interne du centre d, 1985.

A. F. Emery, O. Johansson, and A. Abrous, « Radiation Heat Transfer Shapefactors for Combustion Systems », Fundamentals and applications of radiation heat transfer, pp.119-126, 1987.

D. K. Edwards, « The Plating Algorithm for Radiation Script-F Tansfer Factor, Journal of Heat Transfer, vol.108, 1986.

P. Marino, A. Pignotti, and D. Solis, « Numerical Model of Steel Slab Reheating in Pusher Furnaces, Latin American Applied Research, vol.32, issue.3, pp.257-261, 2002.

Y. Yang, J. Kroeze, and M. A. Reuter, Simulation of slab movement and transient heating in a continuous steel reheat furnace, Progress in Computational Fluid Dynamics, 2004.
DOI : 10.1504/PCFD.2004.003785

D. Lindholm and B. Leden, A FINITE ELEMENT METHOD FOR SOLUTION OF THE THREE-DIMENSIONAL TIME-DEPENDENT HEAT-CONDUCTION EQUATION WITH APPLICATION FOR HEATING OF STEELS IN REHEATING FURNACES, Numerical Heat Transfer, Part A: Applications, vol.35, issue.2, pp.155-172, 1999.
DOI : 10.1080/104077899275308

J. F. Bourgeois, « Automatisme et régulation des équipements thermiques » ,Technique de l'ingénieur BE9590, traité génie énergétique, 1998.

P. Zygmunt and A. Puissant, « Démarrage du deuxième four à brames sur le train à bandes de Sollac Florange, pp.87-95, 2001.

W. Wang, H. X. Li, and J. Zhang, A hybrid approach for supervisory control of furnace temperature, Control Engineering Practice, vol.11, issue.11, pp.1325-1334, 2003.
DOI : 10.1016/S0967-0661(02)00257-5

Z. Wang, Q. Wu, and T. Chai, Optimal-setting control for complicated industrial processes and its application study, Control Engineering Practice, vol.12, issue.1, pp.65-74, 2004.
DOI : 10.1016/S0967-0661(02)00316-7

L. M. Pedersen and B. Wittenmark, « Development of advanced furnace control algorithm, Steel Technology International, pp.149-152, 1999.

H. E. Pike and S. J. Citron, Optimization studies of a slab reheating furnace, Automatica, vol.6, issue.1, pp.41-50, 1970.
DOI : 10.1016/0005-1098(70)90073-7

I. D. Landau, « Identification et commande des systèmes », Traité des Nouvelles Technologies, série Automatique, 2ème édition, 1993.

J. P. Corriou, Génie de procédés de l'école de Nancy, 2 ème édition 'Tec et Doc, Commande des Procédés, 2003.

A. Jaklic, F. Vode, and J. Triplat, « The 3D online simulation model of slab reheating in a pusher-type furnace, th European Conference on industrial furnaces and boilers, 2006.

A. Quinqueneau and P. F. Miquel, « Experimental and theoretical investigation of a low-NOx high temperature industrial burner», International Gas Research Conference, pp.225-236, 1998.

C. Zhang, T. Ishii, and Y. Hino, « The Numerical and Experimental Study of Nonpremixed Combustion Flames in Regenerative Furnaces», journal of Heat Transfer, vol.122, 2000.

A. Milani and J. G. Wunning, « Advanced combustion equipment for continuous furnaces», IFRF Combustion Journal, article, 2004.

P. B. Taylor and P. J. Foster, The total emissivities of luminous and non-luminous flames, International Journal of Heat and Mass Transfer, vol.17, issue.12, pp.1591-1605, 1974.
DOI : 10.1016/0017-9310(74)90067-2

W. H. Chen, Y. C. Chung, and J. L. , Analysis on energy consumption and performance of reheating furnaces in a hot strip mill, International Communications in Heat and Mass Transfer, vol.32, issue.5, pp.695-706, 2005.
DOI : 10.1016/j.icheatmasstransfer.2004.10.019