J. Albus, R. Bostelman, and N. Dagalakis, The NIST ROBOCRANE, J. Robotic Syst, vol.10, issue.5, pp.709-724, 1993.

S. Kawamura, W. Choe, S. Tanaka, and S. R. Pandian, Development of an ultrahigh speed robot falcon using wire drive system, Proc. IEEE Int. Conf. Robotics and Automation, pp.215-220, 1995.

M. Carricato and J. Merlet, Stability analysis of underconstrained cable-driven parallel robots, IEEE Trans. on Robotics, vol.29, issue.1, pp.288-296, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01425222

G. Rosati, D. Zanotto, and S. K. , On the design of adaptive cable-driven systems, ASME Journal of Mechanisms and Robotics, vol.3, 2011.

X. Zhou, C. P. Tang, and V. Krovi, Analysis framework for cooperating mobile cable robots, Proc. IEEE Int. Conf. Robotics and Automation, pp.3128-3133, 2012.

P. Gallina and G. Rosati, Manipulability of a planar wire driven haptic device, Mech. and Mach. Theory, vol.37, issue.2, pp.215-228, 2002.

R. L. Williams, I. I. , B. Snyder, J. S. Albus, and R. V. Bostelman, Sevendof cable-suspended robot with independent metrology, Proc. ASME Design Engineering Technical Conf. and Computers and Information in Engineering Conf., no. Paper DETC2004/MECH-57125, 2004.

C. Ferraresi, M. Paoloni, S. Pastorelli, and F. Pescarmona, A new 6-dof parallel robotic structure actuated by wires: The wiro-6.3, J. of Robot. Syst, vol.21, issue.11, pp.581-595, 2004.

M. Hiller, S. Fang, S. Mielczarek, R. Verhoeven, and D. Franitza, Design, analysis and realization of tendon-based parallel manipulators, Mech. and Mach. Theory, vol.40, issue.4, pp.429-445, 2005.

R. L. Williams, I. I. , M. Xin, and P. Bosscher, Contour-crafting-cartesiancable robot system concepts: Workspace and stiffness comparisons, Proc. ASME Int. Design Engineering Technical Conf. and Computers and Information in Engineering Conf., no. Paper DETC2008-49478, 2008.

M. M. Aref and H. D. Taghirad, Geometrical workspace analysis of a cable-driven redundant parallel manipulator: KNTU CDRPM, Proc

. Ieee/rsj and . Int, Conf. Intelligent Robots and Systems, pp.1958-1963, 2008.

Y. Takeda and H. Funabashi, Kinematic synthesis of spatial inparallel wire-driven mechanism with six degrees of freedom with high force transmissibility, Proc. ASME Design Engineering Technical Conf. and Computers and Information in Engineering Conf., no. Paper DETC2000/MECH-14090, 2000.

S. Perreault and C. M. Gosselin, Cable-driven parallel mechanisms: Application to a locomotion interface, ASME J. Mech. Des, vol.130, issue.10, 2008.

T. Bruckmann, L. Mikelsons, T. Brandt, M. Hiller, and D. Schramm, Design approaches for wire robots, Proc. ASME Int. Design Engineering Technical Conf. and Computers and Information in Engineering Conf., no. Paper DETC2009-86720, 2009.

K. Azizian and P. Cardou, The dimensional synthesis of planar parallel cable-driven mechanisms through convex relaxations, ASME Journal of Mechanisms and Robotics, vol.4, issue.3, 2012.

I. Ebert-uphoff and P. A. Voglewede, On the connections between cable-driven robots, parallel manipulators and grasping, Proc. IEEE Int. Conf. Robotics and Automation, pp.4521-4526, 2004.

P. Lafourcade, M. Llibre, and C. Reboulet, Design of a parallel wiredriven manipulator for wind tunnels, Proc. Workshop on Fundamental Issues and Future Research Directions for Parallel Mech. and Manipulators, pp.187-194, 2002.

A. Pott, H. Mutherich, W. Kraus, V. Schmidt, P. Miermeister et al., IPAnema: A family of cable-driven parallel robots for industrial applications, pp.119-134, 2013.

S. Tadokoro, S. Nishioka, T. Kimura, M. Hattori, T. Takamori et al., On fundamental design of wire configurations of wiredriven parallel manipulators with redundancy, Proceedings of the 1996 Japan/USA Symposium on Flexible Automation, pp.151-158, 1996.

H. Khakpour, L. Birglen, and S. Tahan, Synthesis of differentially driven planar cable parallel manipulators, IEEE Trans. on Robotics, vol.30, issue.3, pp.619-630, 2014.

J. Pusey, A. Fattah, S. Agrawal, and E. Messina, Design and workspace analysis of a 6-6 cable-suspended parallel robot, Mechanism and Machine Theory, vol.39, pp.761-778, 2004.

X. Tang and R. Yao, Dimensional design of the six-cable driven parallel manipulator of FAST, ASME J. Mech. Des, vol.133, issue.11, 2011.

J. Deschenes, P. Lambert, S. Perreault, N. Martel-brisson, N. Zoso et al., A cabledriven parallel mechanism for capturing object appearance from multiple viewpoints, Sixth International Conference on 3-D Digital Imaging and Modeling, 2007.

P. Bosscher, A. T. Riechel, and I. Ebert-uphoff, Wrench-feasible workspace generation for cable-driven robots, IEEE Trans. on Robotics, vol.22, issue.5, pp.890-902, 2006.

S. Bouchard, C. M. Gosselin, and B. Moore, On the ability of a cabledriven robot to generate a prescribed set of wrenches, ASME Journal of Mechanisms and Robotics, vol.2, issue.1, pp.1-10, 2010.

S. Abdelaziz, L. Esteveny, L. Barbé, P. Renaud, B. Bayle et al., Development of a mr-compatible cable-driven manipulator: design and technological issues, Proc. IEEE Int. Conf. Robotics and Automation, pp.1488-1494, 2012.

A. Taghavi, S. Behzadipour, N. Khalilinasab, and H. Zohoor, Workspace improvement of two-link cable-driven mechanisms with spring cable, Cable-Driven Parallel Robots, pp.201-213, 2013.

R. G. Roberts, T. Graham, and T. Lippitt, On the inverse kinematics, statics, and fault tolerance of cable-suspended robots, J. of Robot. Syst, vol.15, issue.10, pp.581-597, 1998.

G. M. Ziegler, Lectures on Polytopes, vol.152, 1994.

M. Gouttefarde and S. Krut, Characterization of parallel manipulator available wrench set facets, Advances in Robot Kinematics, J. Lenarcic and, pp.475-482, 2010.
URL : https://hal.archives-ouvertes.fr/lirmm-00533860

V. Lumelsky, On fast computations of distance between line segments, Information Processing Letters, vol.21, issue.2, pp.55-61, 1985.

C. Ericson, Real-Time Collision Detection. Morgan Kaufmann Series in Interactive 3-D Technology, 2005.

T. Papadopoulo and M. Lourakis, Estimating the jacobian of the singular value decomposition: Theory and applications, European Conference on Computer Vision, pp.554-570, 2000.
URL : https://hal.archives-ouvertes.fr/inria-00072686

M. Gouttefarde and C. M. Gosselin, On the properties and the determination of the wrench-closure workspace of planar parallel cabledriven mechanisms, Proc. ASME Design Engineering Technical Conf. and Computers and Information in Engineering Conf., no. Paper DETC2004/MECH-57127, 2004.
URL : https://hal.archives-ouvertes.fr/lirmm-00198798

, Website of project CoGiRo, 2013.