Erosion resistance and adhesion of composite metal/ceramic coatings produced by plasma spraying

D. Ramm , I. Hutchings , T. Clyne

Ceramic coatings can exhibit greater erosion resistance than most metallic coatings. Such coatings are conveniently produced by thermal spraying. Unfortunately, thermally sprayed ceramic coatings often exhibit poor adhesion, partly as a consequence of the development of residual stresses during spraying and subsequent cooling. Composite coatings have been studied using aluminium/alumina deposits on steel substrates. The incorporation of ceramics within a ductile matrix has potential for sharply reducing the erosive wear at high erodent impact angles, whilst retaining the good erosion resistance of ceramics at low angles. It is shown that the proportion of metal and ceramic at the free surface can be specified so as to optimise the erosion resistance. Experiments have also been carried out on the resistance of the coatings to debonding during four-point bending of the coated substrate. Progress is being made towards the tailoring of composition profiles in graded coatings so as to optimise the combination of erosion resistance and adhesion.

Domaines: Articles anciens

D. Ramm, I. Hutchings, T. Clyne. Erosion resistance and adhesion of composite metal/ceramic coatings produced by plasma spraying. Journal de Physique IV Proceedings, 1993, 03 (C7), pp.C7-913-C7-919. ⟨10.1051/jp4:19937141⟩. ⟨jpa-00251763⟩