S. Cetinkunt, U. Pinsopon, C. Chen, A. Egelja, and S. Anwar, Positive flow control of closed-center electrohydraulic implement-by-wire systems for mobile equipment applications, Mechatronics, vol.14, issue.4, pp.403-420, 2004.
DOI : 10.1016/S0957-4158(03)00067-9

B. Armstrong-hélouvry, P. Dupont, and C. Canudas-de-wit, A survey of models, analysis tools and compensation methods for the control of machines with friction, Automatica, vol.30, issue.7, pp.1083-1138, 1994.
DOI : 10.1016/0005-1098(94)90209-7

H. Olsson, K. J. Aström, C. Canudas-de-wit, M. Gäfvert, and P. Lichinsky, Friction Models and Friction Compensation, European Journal of Control, vol.4, issue.3, pp.176-195, 1998.
DOI : 10.1016/S0947-3580(98)70113-X

Y. Li, High precision motion control based on a discretetime sliding mode approach

Y. Li and J. Wikander, Discrete-time sliding mode control of a dc motor and ball-screw driven positioning table, Proc. IFAC 15th Triennial World Congress, pp.2436-2441, 2002.

H. Qiu and Q. Zhang, Feedforward-plus-proportional-integral-derivative controller for an off-road vehicle electrohydraulic steering system, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol.5, issue.5, pp.375-382, 2003.
DOI : 10.1243/095440703321645089

J. Wang, H. Van-brussel, and J. Swevers, Robust Perfect Tracking Control With Discrete Sliding Mode Controller, Journal of Dynamic Systems, Measurement, and Control, vol.125, issue.1, pp.27-32, 2003.
DOI : 10.1115/1.1540994

F. Ohkawa, S. Sagara, T. Yamashita, and M. Tomizuka, Digital adaptive control for servo system with unknown nonlinear friction, Proceedings of the 1992 International Conference on Industrial Electronics, Control, Instrumentation, and Automation, 1270.
DOI : 10.1109/IECON.1992.254421

S. Drakunov, G. D. Hanchin, W. C. Su, and ¨. U. Ozgüner, Nonlinear Control of a Rodless Pneumatic Servoactuator, or Sliding Modes versus Coulomb Friction**This paper was not presented at any IFAC meeting. This paper was recommended for publication in revised form by Associate Editor Hassan Khalil under the direction of Editor Tamer Ba??ar., Proc. of the 40th IEEE Conference on Decision and Control, pp.1401-1408, 1997.
DOI : 10.1016/S0005-1098(97)00015-0

I. Egido, F. Fernandez-bernal, L. Rouco, E. Porras, and A. Saiz-chicharro, Modeling of Thermal Generating Units for Automatic Generation Control Purposes, IEEE Transactions on Control Systems Technology, vol.12, issue.1, pp.205-210, 2004.
DOI : 10.1109/TCST.2003.821959

P. Wellstead and M. Readman, Engine Speed Control. [Online] Available: http://www.control-systemsprinciples .co.uk/engine-speed-control Handling stiction with variable, 2003.

W. Su, S. V. Drakunov, and ¨. U. Ozgüner, An O(T 2 ) boundary layer in sliding mode for sampled-data systems, IEEE Transactions On Automatic Control, vol.45, issue.3, pp.482-485

D. K. Young, V. I. Utkin, and ¨. U. Ozgüner, A control engineer " s guide to sliding mode control, IEEE Transactions on Control Systems Technology, vol.7, issue.3, 1999.

S. S. Ge, T. H. Lee, and S. X. Ren, Adaptive friction compensation of servo mechanisms, International Journal of Systems Science, vol.32, issue.4, pp.523-532, 2001.
DOI : 10.1080/00207720119378

X. Wang, C. Su, and H. Hong, Robust adaptive control of a class of nonlinear systems with unknown dead-zone, Automatica, vol.40, issue.3, pp.407-413, 2004.
DOI : 10.1016/j.automatica.2003.10.021

S. C. Southward, C. J. Radcliffe, and C. R. Maccluer, Robust Nonlinear Stick-Slip Friction Compensation, Journal of Dynamic Systems, Measurement, and Control, vol.113, issue.4, pp.639-645, 1991.
DOI : 10.1115/1.2896469

K. R. Thorp and L. F. Tian, Performance Study of Variable-rate Herbicide Applications based on Remote Sensing Imagery, Biosystems Engineering, vol.88, issue.1, pp.35-47, 2004.
DOI : 10.1016/j.biosystemseng.2004.01.012

E. Vrindts, J. De-baerdemaeker, and H. Ramon, Weed Detection Using Canopy Reflection, Precision Agriculture, vol.3, issue.1, p.pp
DOI : 10.1117/12.336891

L. Tian, J. F. Reid, and J. W. Hummel, DEVELOPMENT OF A PRECISION SPRAYER FOR SITE-SPECIFIC WEED MANAGEMENT, Transactions of the ASAE, vol.42, issue.4, pp.893-900, 1999.
DOI : 10.13031/2013.13269

N. Wang, N. Zhang, F. E. Dowell, Y. Sun, and D. E. Peterson, DESIGN OF AN OPTICAL WEED SENSOR USINGPLANT SPECTRAL CHARACTERISTICS, Transactions of the ASAE, vol.44, issue.2, pp.409-419, 2001.
DOI : 10.13031/2013.4673

C. W. De-silva, Mechatronics, an integrated approach, 2005.

Y. A. Engel and M. A. Boles, Thermodynamics, an engineering approach, 2002.

H. E. Merrit, Hydraulic Control Systems, Journal of Applied Mechanics, vol.35, issue.1, 1967.
DOI : 10.1115/1.3601167

H. K. Khalil, Nonlinear systems, 1996.

E. Fridman, Effects of small delays on stability of singularly perturbed systems, Automatica, vol.38, issue.5, pp.897-902, 2002.
DOI : 10.1016/S0005-1098(01)00265-5

A. Ionita and V. Dragan, Stabilization of singularly perturbed linearly systems with delay and saturation control, Proc. of the 7th Mediterranean Conference on Control and Automation, pp.1855-1869, 1999.

J. P. Richard, F. Gouaisbout, and W. Perruquetti, Sliding mode control in the presence of delay, Kybernetika, vol.37, issue.3, pp.277-294, 2001.

E. Fridman, A. Seuret, and J. P. Richard, Robust sampled-data stabilization of linear systems: an input delay approach, Automatica, vol.40, issue.8, pp.1441-1446, 2004.
DOI : 10.1016/j.automatica.2004.03.003
URL : https://hal.archives-ouvertes.fr/inria-00131031

Y. Cao, Y. Sun, and C. Cheng, Delay-dependent robust stabilization of uncertain systems with multiple state delays, IEEE Transactions on Automatic Control, vol.43, issue.11, pp.1608-1612, 1998.

S. Boyd, L. Ghaoui, E. Feron, and V. Balakrishnan, Linear matrix inequalities in system and control theory, 1994.
DOI : 10.1137/1.9781611970777

L. Fridman and A. Levant, Higher-order sliding modes " , Sliding mode control in engineering