Aerosol Measurement: Principle, Techniques and Applications, 2011. ,
DOI : 10.1002/9781118001684
Nanotoxicology: An Emerging Discipline Evolving from Studies of Ultrafine Particles, Environmental Health Perspectives, vol.113, issue.7, pp.823-839, 2005. ,
DOI : 10.1289/ehp.7339
Industrial production and professional application of manufactured nanomaterials-enabled end products in Dutch industries, potential for exposure, The Annals of Occupational Hygiene, vol.57, issue.3, pp.314-327, 2012. ,
Workplace exposure to nanoparticles, 2010. ,
Nanomaterials and nanoparticles: Sources and toxicity, Biointerphases, vol.2, issue.4, pp.17-172, 2007. ,
DOI : 10.1116/1.2815690
URL : http://avs.scitation.org/doi/pdf/10.1116/1.2815690
Best Practices Guide to Synthetic Nanoparticle Risk Management, L'Institut de recherche Robert-Sauvé en santé et en sécurité du travail (IRSST), 2009. ,
Investigation of the aerosols produced by a high-speed, hand-held grinder using various substrates, Annals of Occupational Hygiene, vol.46, issue.8, pp.663-672, 2002. ,
Measurement of nanoparticle removal by abrasion, Journal of Physics: Conference Series, vol.170, 2009. ,
DOI : 10.1088/1742-6596/170/1/012014
Wear mechanism in automotive brake materials, wear debris and its potential environmental impact, Wear, vol.267, issue.5-8, pp.5-8, 2009. ,
DOI : 10.1016/j.wear.2009.01.034
Method for the characterization of the abrasion induced nanoparticle release into air from surface coatings, Journal of Aerosol Science, vol.40, issue.3, pp.209-217, 2009. ,
DOI : 10.1016/j.jaerosci.2008.10.006
Release of Carbon Nanotubes from an Epoxy-Based Nanocomposite during an Abrasion Process, Environmental Science & Technology, vol.46, issue.13, pp.7366-7372, 2012. ,
DOI : 10.1021/es300320y
On the Lifecycle of Nanocomposites: Comparing Released Fragments and their In-Vivo Hazards from Three Release Mechanisms and Four Nanocomposites, Small, vol.3, issue.16, pp.2384-2395, 2011. ,
DOI : 10.1038/nnano.2008.111
Study on the friction and wear properties of carbon fabric composites reinforced with micro- and nano-particles, Materials Science and Engineering: A, vol.404, issue.1-2, pp.251-258, 2005. ,
DOI : 10.1016/j.msea.2005.05.084
Abrasive wear resistance of some commercial abrasion resistant steels evaluated by laboratory test methods, Wear, vol.267, issue.11, pp.2055-2061, 2009. ,
DOI : 10.1016/j.wear.2009.08.005
The Friction and Lubrication of Solids, American Journal of Physics, vol.19, issue.7, 1954. ,
DOI : 10.1119/1.1933017
Friction between Unlubricated Metals: A Theoretical Analysis of the Junction Model, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.228, issue.1173, pp.191-204, 1955. ,
DOI : 10.1098/rspa.1955.0043
The steady state sliding of rough surfaces, Wear, vol.175, issue.1-2, pp.81-92, 1994. ,
DOI : 10.1016/0043-1648(94)90171-6
A model for micro-slip between flat surfaces based on deformation of ellipsoidal elastic bodies, Tribology International, vol.30, issue.8, pp.599-603, 1997. ,
DOI : 10.1016/S0301-679X(97)00028-5
Investigation of the release of particles from a nanocoated producted, Advances in Nanoparticles, vol.2, pp.39-44, 2013. ,
An experimental and theoretical investigation of ploughing, cutting and wedge formation during abrasive wear, Tribology International, vol.21, issue.1, pp.51-57, 1988. ,
DOI : 10.1016/0301-679X(88)90128-4
Ultrafine Beryllium Number Concentration as a Possible Metric for Chronic Beryllium Disease Risk, Applied Occupational and Environmental Hygiene, vol.16, issue.5, pp.631-638, 2001. ,
DOI : 10.1080/10473220120812
Particle Settling After Lead-Based Paint Abatement Work and Clearance Waiting Period, AIHAJ - American Industrial Hygiene Association, vol.61, issue.6, pp.798-807, 2000. ,
DOI : 10.1080/15298660008984589
Sanding dust from nanoparticle-containing paints: Physical characterisation, Journal of Physics: Conference Series, vol.151, 2009. ,
DOI : 10.1088/1742-6596/151/1/012048
URL : http://iopscience.iop.org/article/10.1088/1742-6596/151/1/012048/pdf
Brake Wear Particulate Matter Emissions, Environmental Science & Technology, vol.34, issue.21, pp.4463-4469, 2000. ,
DOI : 10.1021/es001108h
Airborne Brake Wear Debris:?? Size Distributions, Composition, and a Comparison of Dynamometer and Vehicle Tests, Environmental Science & Technology, vol.37, issue.18, pp.4060-4069, 2003. ,
DOI : 10.1021/es034145s
Preparation of scratch and abrasion resistant polymeric nanocomposites by monomer grafting onto nanoparticles, 2 Characterization of radiation-cured polymeric nanocomposites, Macromolecular Chemistry and Physics, vol.201, issue.18, pp.2765-2770, 2000. ,
DOI : 10.1002/1521-3935(20001201)201:18<2765::AID-MACP2765>3.0.CO;2-9
Abrasive wear resistance and cutting performance of complex PVD coatings, Surface and Coatings Technology, vol.68, issue.69, pp.68-69, 1994. ,
DOI : 10.1016/0257-8972(94)90206-2
The release of TiO2 and SiO2 nanoparticles from nanocomposites, Polymer Degradation and Stability, vol.94, issue.5, pp.873-876, 2009. ,
DOI : 10.1016/j.polymdegradstab.2009.02.005
An overview on the degradability of polymer nanocomposites, Polymer Degradation and Stability, vol.88, issue.2, pp.234-250, 2005. ,
DOI : 10.1016/j.polymdegradstab.2004.09.013
Roles of anatase and rutile TiO2 nanoparticles in photooxidation of polyurethane, Polymer Testing, vol.26, issue.2, pp.202-208, 2007. ,
DOI : 10.1016/j.polymertesting.2006.10.002
Synthetic TiO2 nanoparticle emission from exterior facades into the aquatic environment, Environmental Pollution, vol.156, issue.2, pp.233-239, 2008. ,
DOI : 10.1016/j.envpol.2008.08.004
Elastic CNT???polyurethane nanocomposite: synthesis, performance and assessment of fragments released during use, Nanoscale, vol.396, issue.1, pp.369-380, 2013. ,
DOI : 10.1007/s00216-009-3319-2
Evaluation of nanoparticle emission for TiO2 nanopowder coating materials, Journal of Nanoparticle Research, vol.190, issue.6/7, pp.157-163, 2007. ,
DOI : 10.1080/00984100290071658
Characterization of Nanoparticle Release from Surface Coatings by the Simulation of a Sanding Process, Annals of Occupational Hygiene, vol.36, issue.3, pp.615-624, 2010. ,
DOI : 10.1016/S1352-2310(02)00174-7
Experimental study of the aerosolization of fine alumina particles from bulk by a vortex shaker, Powder Technology, vol.246, pp.583-589, 2013. ,
DOI : 10.1016/j.powtec.2013.05.040
URL : https://hal.archives-ouvertes.fr/ineris-00963502
Ultrafine Aerosol Emission from the Free Fall of TiO2 and SiO2 Nanopowders, KONA Powder and Particle Journal, vol.25, issue.0, pp.190-204, 2007. ,
DOI : 10.14356/kona.2007017
Evaluation of Aerosol Release during the handling of Unrefined Single Walled Carbon Nanotube Material, 2003. ,
Exposure to Carbon Nanotube Material: Aerosol Release During the Handling of Unrefined Single-Walled Carbon Nanotube Material, Journal of Toxicology and Environmental Health, Part A, vol.67, issue.1, pp.87-107, 2004. ,
DOI : 10.1002/(SICI)1521-4095(199810)10:15<1157::AID-ADMA1157>3.0.CO;2-N
Dustiness testing of engineered nanomaterials, Journal of Physics: Conference Series, vol.170, 2009. ,
DOI : 10.1088/1742-6596/170/1/012003
Generation of CNT/CNF dusts by a shaker aerosol generator in combination with a thermal precipitator as the collection system for characterization of the fibre morphology, Gefahrstoffe Reinhaltung der Luft, vol.70, issue.12, pp.31-35, 2010. ,
Nanoparticle exposure at nanotechnology workplaces: A review, Particle and Fibre Toxicology, vol.8, issue.1, 2011. ,
DOI : 10.1039/b303928p
URL : https://particleandfibretoxicology.biomedcentral.com/track/pdf/10.1186/1743-8977-8-22?site=particleandfibretoxicology.biomedcentral.com
Measurements of the effectiveness of dust extraction systems of hand sanders used on wood, Annals of Occupational Hygiene, vol.38, issue.3, pp.279-302, 1994. ,
Particle sampling by TEM grid filtration, Aerosol Science and Technology, vol.47, pp.767-775 ,
URL : https://hal.archives-ouvertes.fr/ineris-00971082
The characterisation of rough particle contacts by atomic force microscopy, Journal of Colloid and Interface Science, vol.299, issue.2, pp.665-672, 2006. ,
DOI : 10.1016/j.jcis.2006.03.021
Adhesion forces measured between particles and substrates with nano-roughness, Minerals and Metallurgical Processing, pp.226-232, 2006. ,
Interaction force measurements using atomic force microscopy for characterization and control of adhesion, dispersion and lubrication in particulate systems, Journal of Adhesion Science and Technology, vol.24, issue.8, pp.611-626, 2005. ,
DOI : 10.1081/DIS-120021805
Prediction of Inter-particle Adhesion Force from Surface Energy and Surface Roughness, Journal of Adhesion Science and Technology, vol.361, issue.1, pp.367-384, 2011. ,
DOI : 10.1163/156856193X00321
Micro/Nano-particle Manipulation and Adhesion Studies, Journal of Adhesion Science and Technology, vol.183, issue.5-6, pp.457-480, 2008. ,
DOI : 10.1006/jcis.1996.0588
Numerical surface characterization of wear debris from artificial joints using atomic force microscopy, Chinese Science Bulletin, vol.54, issue.24, pp.4583-4588, 2010. ,
Nano-scale characterization of fracture surfaces of blended epoxy resins related to fracture properties, Materials Science and Engineering: A, vol.496, issue.1-2, pp.337-344, 2008. ,
DOI : 10.1016/j.msea.2008.06.030
Abrasion and nanoscratch in nanostructured epoxy coatings, Journal of Applied Polymer Science, vol.101, issue.3, pp.1720-1727, 2010. ,
DOI : 10.1002/polb.10365
Nanoabrasive wear induced by an AFM diamond tip on stainless steel, Wear, vol.263, issue.7-12, pp.7-12, 2007. ,
DOI : 10.1016/j.wear.2006.10.020
Imaging surfaces of nano-scale roughness by atomic force microscopy with carbon nanotubes as tips: a comparative study, Surface and Interface Analysis, vol.252, issue.11, pp.1382-1391, 2011. ,
DOI : 10.1016/j.apsusc.2005.02.122
The abrasion of metals: A model of the process, Wear, vol.5, issue.6, pp.478-498, 1962. ,
DOI : 10.1016/0043-1648(62)90064-9
Friction and Wear of Materials, Journal of Applied Mechanics, vol.33, issue.2, 1965. ,
DOI : 10.1115/1.3625110
A model for the wear of brittle solids under fixed abrasive conditions, Wear, vol.33, issue.2, pp.369-372, 1975. ,
DOI : 10.1016/0043-1648(75)90290-2
A new model for two-body abrasive wear based on the localization of plastic deformation, Wear, vol.117, issue.1, pp.1-35, 1987. ,
DOI : 10.1016/0043-1648(87)90242-0
A slip-line field model of abrasive wear, Wear, vol.196, issue.1-2, pp.35-45, 1996. ,
DOI : 10.1016/0043-1648(95)06824-4
Cyclic micro-slip under unlubricated conditions, Tribology International, vol.28, issue.4, pp.207-217, 1995. ,
DOI : 10.1016/0301-679X(94)00001-7
Modelling of two-body abrasive wear under multiple contact conditions, Wear, vol.217, issue.1, pp.35-45, 1998. ,
DOI : 10.1016/S0043-1648(98)00161-6
Computer simulation of two-body abrasion processes, Wear, vol.251, issue.1-12, pp.250-251, 2001. ,
DOI : 10.1016/S0043-1648(01)00769-4
An energy description of wear mechanisms and its applications to oscillating sliding contacts, Wear, vol.255, issue.1-6, pp.1-6, 2003. ,
DOI : 10.1016/S0043-1648(03)00117-0
Modelling abrasive wear, Wear, vol.258, issue.1-4, pp.281-293, 2005. ,
DOI : 10.1016/j.wear.2004.09.065
A universal wear law for abrasion, Wear, vol.262, issue.7-8, pp.883-888, 2007. ,
DOI : 10.1016/j.wear.2006.08.017
A novel energy-based generic wear model at the asperity level, Wear, vol.270, issue.11-12, pp.11-12, 2011. ,
DOI : 10.1016/j.wear.2011.01.028
Physicsbased modeling for partial slip behavior of spherical contacts, International Journal of Solids and Structures, vol.47, pp.18-19, 2010. ,
Physics-based modeling for fretting behavior of nominally flat rough surfaces, International Journal of Solids and Structures, vol.48, issue.10, pp.1436-1450, 2011. ,
DOI : 10.1016/j.ijsolstr.2011.01.028
Effect of stereoregularity on the photo-oxidative degradation and weathering of polypropylenes, Polymer Degradation and Stability, vol.67, issue.1, pp.1-5, 2000. ,
DOI : 10.1016/S0141-3910(99)00098-1
Physicochemical processes along the early stages of the thermal degradation of isotactic polypropylene, Polymer Degradation and Stability, vol.70, pp.297-302, 2000. ,
Natural photo-aging degradation of polypropylene nanocomposites, Polymer Degradation and Stability, vol.93, issue.1, pp.84-89, 2008. ,
DOI : 10.1016/j.polymdegradstab.2007.10.022
Study of degradation mechanisms of a paint coating during an artificial aging test, Polymer Degradation and Stability, vol.65, issue.1, pp.123-130, 1999. ,
DOI : 10.1016/S0141-3910(98)00227-4