Electric Arc Furnace Dust Recycled in 7075 Aluminum Alloy Composites Fabricated by Spark Plasma Sintering (SPS) - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Materials Année : 2022

Electric Arc Furnace Dust Recycled in 7075 Aluminum Alloy Composites Fabricated by Spark Plasma Sintering (SPS)

Résumé

The reuse of industrial waste, such as electric arc furnace dust (EAFD) as reinforcement in aluminum matrix composites (AMC), is still little explored even though it has shown potential to improve the mechanical properties, such as hardness and mechanical strength, of AMCs. To propose a new alternative for EAFD recycling, AA7075-EAFD composites were produced by spark plasma sintering (SPS). The starting powders were prepared by high-energy milling with different weight fractions of EAFD in two particle size ranges added to an AA7075 matrix. SEM shows that the distribution of reinforcement particles in the matrix is homogeneous with no agglomeration of the particles. XRD patterns of initial powders and the SPS-sintered (SPSed) samples suggest that there was no reaction during sintering (no additional peaks were detected). The relative density of all SPSed samples exceeded 96.5%. The Vickers microhardness of the composites tended to increase with increasing EAFD content, increasing from 108 HV (AA7075 without reinforcement) up to 168 HV (56% increase). The maximum microhardness value was obtained when using 15 wt.% EAFD with a particle size smaller than 53 μm (called G1), showing that EAFD presents a promising potential to be applied as reinforcement in AA7075 matrix composites.
Fichier principal
Vignette du fichier
Soares_2022.pdf (4.24 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Licence : CC BY - Paternité

Dates et versions

hal-03880231 , version 1 (07-04-2023)

Identifiants

Citer

Elder Soares, Nadège Bouchonneau, Elizeth Alves, Kleber Alves, Oscar Araújo Filho, et al.. Electric Arc Furnace Dust Recycled in 7075 Aluminum Alloy Composites Fabricated by Spark Plasma Sintering (SPS). Materials, 2022, 15 (19), pp.6587. ⟨10.3390/ma15196587⟩. ⟨hal-03880231⟩
34 Consultations
24 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More