Control in the operational space of a redundant and under-actuated tensegrity robot - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2022

Control in the operational space of a redundant and under-actuated tensegrity robot

Résumé

The control of a robot inspired from a bird neck is proposed. The system is composed of anti-parallelogram joints [1] assembled on top of each other and driven by cables on each side. The number of joints and the number of cables is chosen such that the robot is both redundant (there are more joints than necessary to control the position and orientation of the robot end effector in the plane) and underactuated (there are more joints than degrees of freedom that can be controlled by actuation, with one of these degrees of freedom being used for tension in the cables). Similar problems can also be found with continuous robots [2]. However, the control laws proposed in this domain are mainly based on the statics of the robot. In contrast, the control law proposed in this paper is based on the dynamics of the robot. The dynamics of the robot can be expressed by two equations : on the one hand, the Lagrange equations link the acceleration of the joint space coordinates to the tension in the cables, on the other hand, the fundamental principle of dynamics links the acceleration of the motors to the tension in the cables and to the torques applied in the motors. The proposed control law uses these two dynamic equations to produce a motion in the operational space with a servoing in the operational space and in the motor space.
Le contrôle d’un robot inspiré du cou d’un oiseau est proposé. Le système est composé de joints anti- parallélogrammes [1] assemblés les uns sur les autres et entraînés par des câbles de chaque côté. Le nombre d’articulations et le nombre de câbles sont choisis de manière à ce que le robot soit à la fois redondant (il y a plus d’articulations que nécessaire pour contrôler la position et l’orientation de l’effec- teur du robot dans le plan) et sous-actionné (il y a plus d’articulations que de degrés de liberté pouvant être contrôlés par actionnement, l’un de ces degrés de liberté étant utilisé pour la tension des câbles). Des problèmes similaires peuvent également être rencontrés avec les robots continus [2]. Cependant, les lois de contrôle proposées dans ce domaine sont principalement basées sur la statique du robot. En revanche, la loi de commande proposée dans cet article est basée sur la dynamique du robot. La dynamique du robot peut être exprimée par 2 équations : d’une part, les équations de Lagrange re- lient l’accélération des coordonnées de l’espace articulaire à la tension dans les câbles, d’autre part, le principe fondamental de la dynamique relie l’accélération des moteurs à la tension dans les câbles et aux couples appliqués dans les moteurs. La loi de commande proposée utilise ces deux équations dyna- miques pour produire un mouvement dans l’espace opérationnel avec un asservissement dans l’espace opérationnel et dans l’espace moteur.
Fichier principal
Vignette du fichier
CFM.pdf (450.2 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03797431 , version 1 (04-10-2022)

Identifiants

  • HAL Id : hal-03797431 , version 1

Citer

Nicolas J.S. Testard, Christine Chevallereau, Philippe Wenger. Control in the operational space of a redundant and under-actuated tensegrity robot. 25ème Congrès Français de Mécanique, Aug 2022, Nantes, France. ⟨hal-03797431⟩
126 Consultations
60 Téléchargements

Partager

Gmail Facebook X LinkedIn More