PIII Treatment of SS Samples Using a Current-Controlled High-Voltage Pulser - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue IEEE Transactions on Plasma Science Année : 2020

PIII Treatment of SS Samples Using a Current-Controlled High-Voltage Pulser

Résumé

Plasma immersion ion implantation (PIII) was conducted in a large volume chamber with a current-controlled high-voltage pulser, to test the vacuum, plasma, and PIII conditions, in a preparation for the treatments of large workpieces or the batch-processing mode. For that purpose, a rugged high-power pulser (10 kW average) based on solid-state moderate voltage pulse system (1 kV) was coupled to a high-voltage transformer (1:22) to feed different loaded sample supports placed in different positions inside the chamber. It was found that the plasma, when produced by a hot filament enhanced glow discharge source, is not uniformly distributed in the chamber but despite that, implantation doses are locally uniform within 10% for 10-15-cm distances, along with the supports. Stainless steel 304 (SS304) -type samples were successfully treated with nitrogen PIII and different tests showed improvements on their mechanical and tribological properties.
Fichier non déposé

Dates et versions

hal-03708304 , version 1 (29-06-2022)

Identifiants

Citer

Mario Ueda, Jose Osvaldo Rossi, Fernanda Sayuri Yamasaki, Ataide Ribeiro Silva, Michel Felipe Araujo, et al.. PIII Treatment of SS Samples Using a Current-Controlled High-Voltage Pulser. IEEE Transactions on Plasma Science, 2020, 48 (11), pp.3800-3806. ⟨10.1109/TPS.2020.3032119⟩. ⟨hal-03708304⟩
13 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More