Investigation of 3D printed polymer-based heat dissipator for GaN transistors - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2021

Investigation of 3D printed polymer-based heat dissipator for GaN transistors

Résumé

GaN transistors are limited in their operational capabilities due to some limitations, of which the thermal management aspects. Until now, most of the existing heat-dissipator systems using additive manufacturing (AM) are based on a metallic finned heat sink, which is heavy and has a relatively high thermal resistance. Heat dissipation based on a phase change as operated in heat pipes is more efficient. Such heat sinks have been experimented with metals or ceramics and not by now with polymers. However, this may be of great interest. The use of polymer may enable reducing weight and cost of the thermal device. It may allow also improving the chemical compatibility of the heat pipe material and fluid, as this is often a severe issue. This work presents a characterization of a 3D-printed polymer-based heat pipe evaporator intended for GaN transistors. The electronic copper circuit on the polymer surface is created using plastronics technology. The metallized circuit presents an adequate electrical conductivity. The thermal characterization performed with the HFE 7000 fluid, shows that it is actually possible to cover the entire heated polymer wall with active nucleation sites once the full developed nucleate boiling regime is reached. The heat conduction through the insulating polymer wall appears as the limiting phenomenon for heat transfer.
Fichier principal
Vignette du fichier
Gerges 2021 Investigation of 3D printed polymer-based heat dissipator for GaN transistors.pdf (1.74 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03451785 , version 1 (26-11-2021)

Identifiants

  • HAL Id : hal-03451785 , version 1

Citer

Tony Gerges, Alexandre Marie, Thilini Wickramasinghe, Philippe Lombard, Marie Levêque, et al.. Investigation of 3D printed polymer-based heat dissipator for GaN transistors. 23rd European Conference on Power Electronics and Applications (EPE'21 ECCE Europe), Sep 2021, Ghent, Belgium. ⟨hal-03451785⟩
80 Consultations
100 Téléchargements

Partager

Gmail Facebook X LinkedIn More