F. Hashimoto, H. Yamaguchi, P. Krajnik, K. Wegener, R. Chaudhari et al., Abrasive fine-finishing technology, CIRP Annals, vol.65, pp.597-620, 2016.

K. Wegener, F. Bleicher, P. Krajnik, H. Hoffmeister, and C. Brecher, Recent developments in grinding machines, CIRP Annals, vol.66, pp.779-802, 2017.

F. Klocke, O. Dambon, and B. Behrens, Analysis of defect mechanisms in polishing of tool steels, Production Engineering, vol.5, pp.475-483, 2011.

C. Cheng, J. Li, Y. Liu, M. Nie, and W. Wang, Deep convolutional neural network-based in-process tool condition monitoring in abrasive belt grinding, Computers in Industry, vol.106, pp.1-13, 2019.

S. Lavernhe, Y. Quinsat, C. Lartigue, and C. Brown, Realistic simulation of surface defects in five-axis milling using the measured geometry of the tool, The International Journal of Advanced Manufacturing Technology, vol.74, pp.393-401, 2014.

S. Ratchev, S. Nikov, and I. Moualek, Material removal simulation of peripheral milling of thin wall low-rigidity structures using FEA, Advances in Engineering Software, vol.35, pp.481-491, 2004.

M. Jachym, S. Lavernhe, C. Euzenat, and C. Tournier, Effective NC machining simulation with OptiX ray tracing engine, The Visual Computer, vol.35, pp.281-288, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01742413

J. Zhang, S. Ong, and A. Nee, Design and development of an in situ machining simulation system using augmented reality technology, Procedia CIRP, vol.3, pp.185-190, 2012.

F. Abecassis, S. Lavernhe, C. Tournier, and P. Boucard, Performance evaluation of CUDA programming for 5-axis machining multi-scale simulation, Computers in Industry, vol.71, pp.1-9, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01136770

W. Zhu, Y. Yang, H. N. Li, D. Axinte, and A. Beaucamp, Theoretical and experimental investigation of material removal mechanism in compliant shape adaptive grinding process, International Journal of Machine Tools and Manufacture, vol.142, pp.76-97, 2019.

S. Leroch, M. Varga, S. Eder, A. Vernes, M. R. Ripoll et al., Smooth particle hydrodynamics simulation of damage induced by a spherical indenter scratching a viscoplastic material, International Journal of Solids and Structures, vol.81, pp.188-202, 2016.

G. Kermouche, J. Rech, H. Hamdi, and J. Bergheau, On the residual stress field induced by a scratching round abrasive grain, Wear, vol.269, pp.86-92, 2010.

J. Jiang, P. Ge, W. Bi, L. Zhang, D. Wang et al., 2d/3d ground surface topography modeling considering dressing and wear effects in grinding process, International Journal of Machine Tools and Manufacture, vol.74, pp.29-40, 2013.

W. Ding, C. Dai, T. Yu, J. Xu, and Y. Fu, Grinding performance of textured monolayer CBN wheels: Undeformed chip thickness nonuniformity modeling and ground surface topography prediction, International Journal of Machine Tools and Manufacture, vol.122, pp.66-80, 2017.

J. Aurich and B. Kirsch, Kinematic simulation of high-performance grinding for analysis of chip parameters of single grains, CIRP Journal of Manufacturing Science and Technology, vol.5, pp.164-174, 2012.

C. Euzenat, S. Lavernhe, and C. Tournier, Implicit modeling of abrasion process based on potential field, Computer-Aided Design, vol.110, pp.69-77, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02013498

E. Brinksmeier, J. Aurich, E. Govekar, C. Heinzel, H. Hoffmeister et al., Advances in modeling and simulation of grinding processes, CIRP Annals, vol.55, pp.667-696, 2006.

K. Z. Gahr and . Preface-;-v-vi, , 1987.

F. W. Preston, The theory and design of plate glass polishing machine, J. soc. Glass technol, vol.11, pp.214-256, 1927.

K. Gahr, Wear by hard particles, Tribology International, vol.31, pp.587-596, 1998.

L. Barthe, N. A. Dodgson, M. A. Sabin, B. Wyvill, and V. Gaildrat, Twodimensional potential fields for advanced implicit modeling operators, Computer Graphics Forum, vol.22, pp.23-33, 2003.
URL : https://hal.archives-ouvertes.fr/hal-01538469

J. Bloomenthal and B. Wyvill, Interactive techniques for implicit modeling, SIGGRAPH Comput. Graph, vol.24, pp.109-116, 1990.

, Introduction to Implicit Surfaces, 1997.

W. E. Lorensen and H. E. Cline, Marching cubes: A high resolution 3d surface construction algorithm, 1987.

W. Zhang, G. Tan, M. Wan, T. Gao, and D. H. Bassir, A new algorithm for the numerical simulation of machined surface topography in multiaxis ball-end milling, Journal of Manufacturing Science and Engineering, vol.130, 2008.

X. Pessoles and C. Tournier, Automatic polishing process of plastic injection molds on a 5-axis milling center, Journal of Materials Processing Technology, vol.209, pp.3665-3673, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00466655

A. Guiot, S. Pattofatto, C. Tournier, and L. Mathieu, Modeling of a polishing tool to simulate material removal, Advanced Materials Research, vol.223, pp.754-763, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01223976

Y. Quinsat and C. Tournier, In situ non-contact measurements of surface roughness, Precision Engineering, vol.36, pp.97-103, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00783922

, , 2010.

L. Grandguillaume, S. Lavernhe, Y. Quinsat, and C. Tournier, Mold manufacturing optimization: A global approach of milling and polishing processes, Procedia CIRP, vol.31, pp.13-18, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01161695