R. B. Randall, A new method of modelling gear faults, Trans. ASME, J. Mech. Des, vol.104, pp.259-267, 1982.

P. D. Mcfadden and J. D. Smith, A Signal Processing Technique for Detecting Local Defects in a Gear from the Signal Average of the Vibration, Proceedings of the Institution of Mechanical Engineers, Part C, vol.199, issue.43, pp.287-292

,

P. D. Mcfadden, Detecting Fatigue Cracks in Gears by Amplitude and Phase Demodulation of the Meshing Vibration, Journal of Vibration, Acoustics, vol.108, pp.165-170, 1986.

M. Firla, Z. Li, N. Martin, C. Pachaud, and T. Barszcz, Automatic Characteristic Frequency Association and All-Sidebands Demodulation for Detection of a Bearing Fault of a Wind Turbine Test Rig, MSSP, vol.80, pp.335-348, 2016.

. Gotix, Characterization of defects on electrically driven mechanical systems, 2019.

N. Martin and C. Mailhes, Automatic Data-Driven Spectral Analysis Based on a Multi-Estimator Approach, Signal processing, vol.146, pp.112-125, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01677964

T. Gerber, N. Martin, and C. Mailhes, Time-frequency Tracking of Spectral Structures Estimated by a Data-driven Method, IEEE Trans. on Industrial Electronics, Special Session, vol.52, issue.10, pp.6616-6626, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01202530

,

N. Martin, Invited Keynote Address, KAStrion project: a new concept for the condition monitoring of wind turbines, CM-MFPT, 2015.

Z. Li, T. Gerber, M. Firla, P. Bellemain, N. Martin et al., AStrion strategy: from acquisition to diagnosis. Application to wind turbine monitoring, International Journal of Condition Monitoring, vol.6, issue.2, pp.47-54, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01182982

X. Laval, G. Song, Z. Li, P. Bellemain, M. Lefray et al., Invited Keynote Address, AStrion assets for the detection of a main bearing failure in an onshore wind turbine, CM-MFPT, pp.10-12, 2016.

M. Eltabach, S. Sieg-zieba, G. Song, Z. Li, P. Bellemain et al., Vibration condition monitoring in a paper industrial plant: Supreme project, CM 2016 and MFPT, pp.10-12, 2016.

D. Vakman, On the Analytic Signal, the Teager-Kaiser Energy Algorithm, and Other Methods for Defining Amplitude and Frequency, IEEE Trans. on Signal Processing, vol.44, issue.4, pp.791-797, 1996.

E. Bedrosian, A product theorem for Hilbert transforms, Proceedings of the IEEE, vol.51, issue.5, pp.868-869, 1963.

L. Cohen, P. Loughlin, and D. Vakman, On an ambiguity in the definition of the amplitude and phase of a signal, Signal Processing, vol.79, pp.103-109, 1999.

D. Abboud, J. Antoni, S. Sieg-zieba, and M. Eltabach, Envelope analysis of rotating machine vibrations in variable speed conditions: A comprehensible treatment, MSSP, vol.84, issue.2, pp.200-226, 2017.

X. Laval, N. Martin, P. Bellemain, Z. Li, C. Mailhes et al., Vibration response demodulation, shock model and time tracking, CM 2018 and MFPT, pp.10-12, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01897378

R. B. Randall, Vibration-based Condition Monitoring, 2011.

N. Martin, P. Jaussaud, and F. Combet, Close shocks detection using time-frequency Prony Modelling, MSSP, vol.18, issue.2, pp.235-261, 2004.

D. Gabor, Theory of communication, IEEE J. Comm, Eng, vol.93, pp.429-457, 1946.

G. Song, Z. Li, P. Bellemain, N. Martin, and C. Mailhes, AStrion data validation of non-stationary wind turbine signals, CM-MFPT 2015, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01182956

P. D. Mcfadden and J. D. Smith, A signal processing technique for detecting local defects in gear from the signal average of the vibration, Proc. In. Mech, Eng, pp.287-292, 1985.

E. Bechhoefer and M. Kingsley, A review of time synchronous average algorithms, Annual Conference of the Prognostics and Health Management Society, pp.1-10, 2009.

P. D. Mcfadden, A revised model for the extraction of periodic waveforms by time domain averaging, Mech. Syst. Signal Process, vol.1, issue.1, pp.90085-90094, 1987.

G. Krishnappa, Gear fault detection parameters development based on modulation techniques, Int. Congress on Sound and Vibration, 1997.

F. Combet and L. Gelman, Novel adaptation of the demodulation technology for gear damage detection to variable amplitudes of mesh harmonics, MSSP, vol.25, pp.839-845, 2011.

J. A. Nelder and R. Mead, A simplex method for function minimization, Computer Journal, vol.7, pp.308-313, 1965.

F. Chaari, W. Baccar, M. S. Abbes, and M. Haddar, Effect of spalling or tooth breakage on gearmesh stiffness and dynamic response of a one-stage spur gear transmission, European Journal of Mechanics A/Solids, vol.27, pp.691-705, 2008.

H. Endo, R. B. Randall, and C. Gosselin, Differential diagnosis of spall vs. cracks in the gear tooth fillet region: Experimental validation, MSSP, vol.23, pp.636-651, 2009.

E. Hubert, P. Borghesani, R. B. Randall, and M. El-badaoui, Challenging the traditional model of gear vibration signals, Survishno conference, 2019.

R. B. Randall and W. A. Smith, New cepstral techniques for operational modal analysis, First World Congress on Condition Monitoring, 2017.

X. Laval, N. Martin, P. Bellemain, and C. Mailhes, Detection and localization of a gear fault using automatic continuous monitoring of the modulation functions, 2 nd World Conference on Condition Monitoring, pp.2-5, 2019.

M. Durnerin, A strategy for the interpretation in spectral analysis, detection and characterization of spectrum components, 1999.

N. Martin, C. Mailhes, and T. Gerber, Anomaly detection system, Patent no. FR N13/53860, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00848297

L. Milic, T. Saramaki, and R. Bregovic, Multirate filters: an overview, APCCAS 2006 -2006 IEEE Asia Pacific Conference on Circuits and Systems, pp.912-915, 2006.

L. R. Rabiner and B. Gold, Theory and application of digital signal processing, 1975.

W. Wang, Early detection of gear tooth cracking using the resonance demodulation technique, MSSP, issue.5, pp.887-903, 2001.

Y. Marnissi, D. Abboud, and M. Elbadaoui, Vibration-based health monitoring methodology for helicopter gearboxes, CM 2018 and MFPT, pp.10-12, 2018.