I. Q. Alonso and N. Fleck, Damage tolerance of an elastic-brittle diamond-celled honeycomb, Scr. Mater, vol.56, pp.693-696, 2007.

M. Ashby, The properties of foams and lattices, Philos. Trans. R. Soc. A: Math., Phys. Eng. Sci, vol.364, 2006.

M. Ashby, Designing architectured materials, Scr. Mater, vol.68, pp.4-7, 2013.

M. Ashby and Y. Bréchet, Designing hybrid materials, Golden Jubilee Issue. Selected topics in Materials Science and Engineering: Past, Present and Future, vol.51, pp.5801-5821, 2003.

N. Auffray, J. Dirrenberger, and G. Rosi, A complete description of bi-dimensional anisotropic strain-gradient elasticity, Int. J. Solids Struct, pp.195-206, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01145736

A. Kotob, M. Combescure, C. Mazière, M. Rose, T. Forest et al., A general and efficient multistart algorithm for the detection of loss of ellipticity in elastoplastic structures, International Journal for Numerical Methods in Engineering, vol.121, issue.5, pp.842-866, 2020.
URL : https://hal.archives-ouvertes.fr/hal-02357003

V. Ballarin, M. Soler, A. Perlade, X. Lemoine, and S. Forest, Mechanisms and modeling of bake-hardening steels: Part i. uniaxial tension, Metall. Mater. Trans. A, vol.40, pp.1367-1374, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00390793

J. Besson, G. Cailletaud, and J. L. Forest, Mécanique non linéaire des matériaux, 2009.

A. Bonfanti and A. Bhaskar, Elastoplastic response and recoil of honeycomb lattices, Eur. J. Mech. -A/Solids, vol.71, pp.77-88, 2018.

A. Bonfanti, A. Bhaskar, and M. Ashby, Plastic deformation of cellular materials, Reference Module in Materials Science and Materials Engineering, 2016.

O. Bouaziz, Y. Bréchet, and J. Embury, Heterogeneous and architectured materials: A possible strategy for design of structural materials, Adv. Eng. Mater, vol.10, pp.24-36, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00358408

Y. Bréchet and J. Embury, Architectured materials: Expanding materials space, Scr. Mater, vol.68, pp.1-3, 2013.

Y. J. Bréchet, Chapter 1. architectured materials: An alternative to microstructure control for structural materials design? a possible playground for bio-inspiration?, in: Materials Design Inspired by Nature: Function Through Inner Architecture, pp.1-16, 2013.

F. Cêté, V. Deshpande, N. Fleck, and A. Evans, The compressive and shear responses of corrugated and diamond lattice materials, Int. J. Solids Struct, vol.43, pp.6220-6242, 2006.

E. Coenen, V. Kouznetsova, and M. Geers, Multi-scale continuous-discontinuous framework for computational-homogenization-localization, J. Mech. Phys. Solids, vol.60, pp.1486-1507, 2012.

C. Combescure and R. Elliott, Hierarchical honeycomb material design and optimization: Beyond linearized behavior, Int. J. Solids Struct, vol.115, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01648159

C. Combescure, . Elliott, . Rs, N. Triantafyllidis, F. Isola et al., Pantographic metamaterials: an example of mathematically driven design and of its technological challenges, Journal of the Mechanics and Physics of Solids, 2018.

V. Deshpande, M. Ashby, and N. Fleck, Foam topology: bending versus stretching dominated architectures, Acta Mater, vol.49, pp.1035-1040, 2001.

A. Dogui and F. Sidoroff, Rhéologie anisotrope en grandes déformations, rhéologie des matériaux anisotropes, Cepadues Toulouse, pp.69-78, 1986.

N. A. Fleck and X. Qiu, The damage tolerance of elastic-brittle, two-dimensional isotropic lattices, J. Mech. Phys. Solids, vol.55, pp.562-588, 2007.

M. Geers, V. Kouznetsova, and W. Brekelmans, Multi-scale computational homogenization: Trends and challenges, fourth International Conference on Advanced COmputational Methods in ENgineering, vol.234, pp.2175-2182, 2010.

J. Gibson and M. Ashby, Cellular Solids: Structures and Properties, 1999.

L. Gong, S. Kyriakides, and N. Triantafyllidis, On the stability of kelvin cell foams under compressive loads, J. Mech. Phys. Solids, vol.53, pp.771-794, 2005.

H. Guoming, W. Hui, Z. Youlin, and B. Wujun, A large deformation model for the elastic moduli of two-dimensional cellular materials, J. Wuhan Univ. Technol.-Mater. Sci. Ed, vol.21, p.154, 2006.

J. F. Hallai and S. Kyriakides, On the effect of lüders bands on the bending of steel tubes. part i: Experiments, Int. J. Solids Struct, vol.48, pp.3275-3284, 2011.

Y. He, Y. Zhou, Z. Liu, and K. Liew, Buckling and pattern transformation of modified periodic lattice structures, Extreme Mech. Lett, vol.22, pp.112-121, 2018.

S. Kyriakides, A. Ok, and E. Corona, Localization and propagation of curvature under pure bending in steel tubes with lüders bands, Int. J. Solids Struct, vol.45, pp.3074-3087, 2008.

P. Ladevèze, Sur la théorie de la plasticité en grandes déformations, 1980.

R. M. Latture, M. R. Begley, and F. W. Zok, Design and mechanical properties of elastically isotropic trusses, J. Mater. Res, vol.33, pp.249-263, 2018.

W. Lüders, Über die äusserung der elasticität an stahlartigen eisenstäben und stahlstäben, und über eine beim biegen solcher stäbe beobachtete molecularbewegung, Dinglers Polytech, vol.5, pp.18-22, 1860.

A. Marais, M. Mazière, S. Forest, A. Parrot, and P. L. Delliou, Identification of a strain-aging model accounting for lüders behavior in a c-mn steel, Phil. Mag, vol.92, pp.3589-3617, 2012.

M. Mazière and S. Forest, Strain gradient plasticity modeling and finite element simulation of lüders band formation and propagation, Continuum Mech. Thermodyn, vol.27, pp.83-104, 2015.

M. Mazière, C. Luis, A. Marais, S. Forest, and M. Gasperini, Experimental and numerical analysis of the lüders phenomenon in simple shear, Int. J. Solids Struct, pp.305-314, 2017.

H. Nassar, Q. C. He, and N. Auffray, A generalized theory of elastodynamic homogenization for periodic media, Int. J. Solids Struct, vol.84, pp.139-146, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01265019

H. Niknam and A. Akbarzadeh, In-plane and out-of-plane buckling of architected cellular plates: numerical and experimental study, Compos. Struct, vol.206, pp.739-749, 2018.

E. Onal, J. E. Frith, M. Jurg, X. Wu, and A. Molotnikov, Mechanical properties and in vitro behavior of additively manufactured and functionally graded ti6al4v porous scaffolds, 2018.

G. Piobert, Expérience sur la pénétration des projectiles dans le fer forgé, 1842.

M. Poncelet, A. Somera, C. Morel, C. Jailin, and N. Auffray, An experimental evidence of the failure of cauchy elasticity for the overall modeling of a noncentro-symmetric lattice under static loading, Int. J. Solids Struct, vol.147, pp.223-237, 2018.

R. Hajidehi, M. Stupkiewicz, and S. , Gradient-enhanced model and its micromorphic regularization for simulation of l++ders-like bands in shape memory alloys, Int. J. Solids Struct, 2017.

G. Rosi and N. Auffray, Continuum modelling of frequency dependent acoustic beam focussing and steering in hexagonal lattices, Eur. J. Mech. -A/Solids, vol.77, 2019.

G. Rosi, L. Placidi, and N. Auffray, On the validity range of strain-gradient elasticity: a mixed static-dynamic identification procedure, Eur. J. Mech. -A/ Solids, vol.69, pp.179-191, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01674513

M. W. Schraad and N. Triantafyllidis, Scale effects in media with periodic and nearly periodic microstructures, Part I: macroscopic properties, J. Appl. Mech, vol.64, pp.751-762, 1997.

H. Tankasala, V. Deshpande, and N. Fleck, Tensile response of elastoplastic lattices at finite strain, J. Mech. Phys. Solids, vol.109, pp.307-330, 2017.

N. Triantafyllidis and S. Bardenhagen, The influence of scale size on the stability of periodic solids and the role of associated higher order gradient continuum models, J. Mech. Phys. Solids, vol.44, pp.47-53, 1996.

H. Tsukahara and T. Iung, Finite element simulation of the piobert-lüders behavior in an uniaxial tensile test, Mater. Sci. Eng.: A, vol.248, pp.304-308, 1998.

E. Turco, A. Misra, M. Pawlikowski, F. Dell'isola, and F. Hild, Enhanced piolahencky discrete models for pantographic sheets with pivots without deformation energy: numerics and experiments, Int. J. Solids Struct, vol.147, pp.94-109, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01791894

A. Vigliotti, V. S. Deshpande, and D. Pasini, Non linear constitutive models for lattice materials, J. Mech. Phys. Solids, vol.64, pp.44-60, 2014.

A. J. Wang and D. Mcdowell, In-plane stiffness and yield strength of periodic metal honeycombs, J. Eng. Mater. Technol, vol.126, pp.137-156, 2004.

A. J. Wang and D. Mcdowell, Yield surfaces of various periodic metal honeycombs at intermediate relative density, Int. J. Plasticity, vol.21, pp.285-320, 2005.

F. W. Zok, R. M. Latture, and M. R. Begley, Periodic truss structures, J. Mech. Phys. Solids, vol.96, pp.184-203, 2016.