H. Abdoul-anziz and P. Seppecher, Strain gradient and generalized continua obtained by homogenizing frame lattices, Mathematics and mechanics of complex systems, vol.6, issue.3, pp.213-250, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01672898

J. J. Alibert, P. Seppecher, and F. Dell'isola, Truss modular beams with deformation energy depending on higher displacement gradients, Mathematics and Mechanics of Solids, vol.8, issue.1, pp.51-73, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00497327

H. Altenbach, V. A. Eremeyev, and K. Naumenko, On the use of the first order shear deformation plate theory for the analysis of three-layer plates with thin soft core layer, ZAMM-Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik, vol.95, issue.10, pp.1004-1011, 2015.

M. Ambati, N. Fang, C. Sun, and X. Zhang, Surface resonant states and superlensing in acoustic metamaterials, Physical Review B, vol.75, p.447, 2007.

O. Andreau, I. Koutiri, P. Peyre, J. D. Penot, N. Saintier et al., Texture control of 316l parts by modulation of the melt pool morphology in selective laser melting, Journal of Materials Processing Technology, vol.264, pp.21-31, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02064113

E. Andrews, W. Sanders, and L. J. Gibson, Compressive and tensile behaviour of aluminum foams, Materials Science and Engineering: A, vol.270, issue.2, pp.113-124, 1999.

A. Andreykiv, P. Prendergast, F. Van-keulen, W. Swieszkowski, and P. Rozing, Bone ingrowth simulation for a concept glenoid component design, Journal of biomechanics, vol.38, issue.5, pp.1023-1033, 2005.

X. Ao and C. Chan, Far-field image magnification for acoustic waves using anisotropic acoustic metamaterials, Physical Review E, vol.77, issue.2, p.601, 2008.

N. Auffray, F. Isola, V. Eremeyev, A. Madeo, L. Placidi et al., Least action principle for second gradient continua and capillary fluids: A lagrangian approach following piola's point of view, The Complete Works of Gabrio Piola, vol.I, pp.606-694, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01168232

E. Barchiesi and L. Placidi, A review on models for the 3d statics and 2d dynamics of pantographic fabrics, Wave Dynamics and Composite Mechanics for Microstructured Materials and Metamaterials, pp.239-258, 2017.

E. Barchiesi, M. Spagnuolo, and L. Placidi, Mechanical metamaterials: a state of the art, Mathematics and Mechanics of Solids, vol.24, issue.1, pp.212-234, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02453434

E. Barchiesi, M. Spagnuolo, and L. Placidi, Mechanical metamaterials: a state of the art, Mathematics and Mechanics of Solids, vol.24, issue.1, pp.212-234, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02453434

A. Bergamini, R. Christen, B. Maag, and M. Motavalli, A sandwich beam with electrostatically tunable bending stiffness, Smart materials and structures, vol.15, issue.3, p.678, 2006.

A. E. Bergamini, M. Zündel, F. Parra, E. A. Delpero, T. Ruzzene et al., Hybrid dispersive media with controllable wave propagation: A new take on smart materials, Journal of Applied Physics, vol.118, issue.15, p.310, 2015.

C. Boutin, G. I. Placidi, and L. , Linear pantographic sheets: Asymptotic micro-macro models identification, Mathematics and Mechanics of Complex Systems, vol.5, issue.2, pp.127-162, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01494280

A. Carcaterra, F. Isola, R. Esposito, and M. Pulvirenti, Macroscopic description of microscopically strongly inhomogeneous systems: A mathematical basis for the synthesis of higher gradients metamaterials, Archive for Rational Mechanics and Analysis, vol.218, issue.3, pp.1239-1262, 2015.

F. Casadei, T. Delpero, A. Bergamini, P. Ermanni, and M. Ruzzene, Piezoelectric resonator arrays for tunable acoustic waveguides and metamaterials, Journal of Applied Physics, vol.112, issue.6, p.902, 2012.

A. Cazzani and P. Ruge, Rotor platforms on pile-groups running through resonance: A comparison between unbounded soil and soil-layers resting on a rigid bedrock, Soil Dynamics and Earthquake Engineering, vol.50, pp.151-161, 2013.

A. Cazzani and P. Ruge, Stabilization by deflation for sparse dynamical systems without loss of sparsity. Mechanical Systems and Signal Processing, 2016.

A. Cazzani, M. Malagù, and E. Turco, Isogeometric analysis: a powerful numerical tool for the elastic analysis of historical masonry arches, Continuum Mechanics and thermodynamics, vol.28, issue.1-2, pp.139-156, 2016.

A. Cazzani, M. Malagù, and E. Turco, Isogeometric analysis of plane-curved beams, Mathematics and Mechanics of Solids, vol.21, issue.5, pp.562-577, 2016.

A. Cazzani, M. Malagù, E. Turco, and F. Stochino, Constitutive models for strongly curved beams in the frame of isogeometric analysis, Mathematics and Mechanics of Solids, vol.21, issue.2, pp.182-209, 2016.

A. Cazzani, F. Stochino, and E. Turco, An analytical assessment of finite element and isogeometric analyses of the whole spectrum of timoshenko beams, ZAMM-Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik, vol.96, issue.10, pp.1220-1244, 2016.

A. Cazzani, N. Rizzi, F. Stochino, and E. Turco, Modal analysis of laminates by a mixed assumed-strain finite element model, Mathematics and Mechanics of Solids, vol.23, issue.1, pp.99-119, 2018.

A. Cazzani, M. Serra, F. Stochino, and E. Turco, A refined assumed strain finite element model for statics and dynamics of laminated plates, Continuum Mechanics and Thermodynamics pp 1-28, 2018.

L. Chevalier, S. Calloch, F. Hild, and Y. Marco, Digital image correlation used to analyze the multiaxial behavior of rubber-like materials, Eur J Mech A/Solids, vol.20, pp.169-187, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00014019

H. N. Chia and B. M. Wu, Recent advances in 3d printing of biomaterials, Journal of Biological Bngineering, vol.9, issue.1, p.4, 2015.

M. Cima, E. Sachs, L. Cima, J. Yoo, S. Khanuja et al., Computer-derived microstructures by 3d printing: bio-and structural materials, Solid Freeform Fabr Symp Proc: DTIC Document, pp.181-90, 1994.

F. Di-cosmo, M. Laudato, and M. Spagnuolo, Acoustic metamaterials based on local resonances: homogenization, optimization and applications, Generalized Models and Non-classical Approaches in Complex Materials 1, pp.247-274, 2018.

D. Vescovo, D. , and G. I. , Dynamic problems for metamaterials: review of existing models and ideas for further research, International Journal of Engineering Science, vol.80, pp.153-172, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00947477

D. Vescovo, D. , and G. I. , Dynamic problems for metamaterials: review of existing models and ideas for further research, International Journal of Engineering Science, vol.80, pp.153-172, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00947477

F. Dell'isola and L. Placidi, Variational principles are a powerful tool also for formulating field theories, Variational models and methods in solid and fluid mechanics, pp.1-15, 2011.

F. Dell'isola, U. Andreaus, and L. Placidi, At the origins and in the vanguard of peridynamics, nonlocal and higher-gradient continuum mechanics: An underestimated and still topical contribution of gabrio piola, Mathematics and Mechanics of Solids, vol.20, issue.8, pp.887-928, 2015.

F. Dell'isola, T. Lekszycki, M. Pawlikowski, R. Grygoruk, and L. Greco, Designing a light fabric metamaterial being highly macroscopically tough under directional extension: first experimental evidence, Zeitschrift für angewandte Mathematik und Physik, vol.66, issue.6, pp.3473-3498, 2015.

F. Dell'isola, D. Steigmann, D. Corte, and A. , Synthesis of fibrous complex structures: designing microstructure to deliver targeted macroscale response, Applied Mechanics Reviews, vol.67, issue.6, p.804, 2015.

F. Dell'isola, S. Bucci, and A. Battista, Against the fragmentation of knowledge: The power of multidisciplinary research for the design of metamaterials, Advanced Methods of Continuum Mechanics for Materials and Structures, pp.523-545, 2016.

F. Dell'isola, G. I. Pawlikowski, M. Rizzi, and N. , Large deformations of planar extensible beams and pantographic lattices: heuristic homogenization, experimental and numerical examples of equilibrium, Proc R Soc A, vol.472, p.790, 2016.

F. Dell'isola, D. Corte, A. , and G. I. , Higher-gradient continua: The legacy of piola, mindlin, sedov and toupin and some future research perspectives, Mathematics and Mechanics of Solids, vol.22, issue.4, pp.852-872, 2017.

F. Dell'isola, P. Seppecher, J. J. Alibert, T. Lekszycki, R. Grygoruk et al., Pantographic metamaterials: an example of mathematically driven design and of its technological challenges, Continuum Mechanics and Thermodynamics, 2019.

F. Dell'isola, P. Seppecher, M. Spagnuolo, E. Barchiesi, F. Hild et al.,

F. Annibale, A. Bouterf, X. Pinelli, A. Misra, B. Desmorat et al., Advances in pantographic structures: design, manufacturing, models, experiments and image analyses, Advances in Pantographic Structures: Design, Manufacturing, Models, Experiments and Image Analyses. Continuum Mechanics and Thermodynamics, pp.1-52, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02156824

K. Deng, Y. Ding, Z. He, H. Zhao, J. Shi et al., Theoretical study of subwavelength imaging by acoustic metamaterial slabs, Journal of Applied Physics, vol.105, issue.12, p.909, 2009.

N. Engheta, R. W. Ziolkowski, V. Eremeyev, and L. Zubov, On constitutive inequalities in nonlinear theory of elastic shells, Metamaterials: physics and engineering explorations, vol.87, pp.94-101, 2006.

V. A. Eremeyev and L. P. Lebedev, Existence theorems in the linear theory of micropolar shells, ZAMM-Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik, vol.91, issue.6, pp.468-476, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00831156

V. A. Eremeyev and L. P. Lebedev, Mathematical study of boundary-value problems within the framework of steigmann-ogden model of surface elasticity, Continuum Mechanics and Thermodynamics, vol.28, issue.1-2, pp.407-422, 2016.

V. A. Eremeyev and W. Pietraszkiewicz, Material symmetry group and constitutive equations of micropolar anisotropic elastic solids, Mathematics and Mechanics of Solids, vol.21, issue.2, pp.210-221, 2016.

S. Eugster, C. Hesch, P. Betsch, and C. Glocker, Director-based beam finite elements relying on the geometrically exact beam theory formulated in skew coordinates, International Journal for Numerical Methods in Engineering, vol.97, issue.2, pp.111-129, 2014.

S. R. Eugster and C. Glocker, Constraints in structural and rigid body mechanics: a frictional contact problem, Annals of solid and structural mechanics, vol.5, issue.1-2, pp.1-13, 2013.

S. R. Eugster and C. Glocker, On the notion of stress in classical continuum mechanics, p.299, 2017.

M. Ferretti and G. Piccardo, Dynamic modeling of taut strings carrying a traveling mass, Continuum Mechanics and Thermodynamics, vol.25, issue.2-4, pp.469-488, 2013.

G. A. Francfort and F. Murat, Homogenization and optimal bounds in linear elasticity, Archive for Rational mechanics and Analysis, vol.94, issue.4, pp.307-334, 1986.

R. Gatt, L. Mizzi, J. I. Azzopardi, K. M. Azzopardi, D. Attard et al., Hierarchical auxetic mechanical metamaterials. Scientific reports, vol.5, p.8395, 2015.

M. Geers, V. G. Kouznetsova, and W. Brekelmans, Multiscale first-order and second-order computational homogenization of microstructures towards continua, International Journal for Multiscale Computational Engineering, vol.1, issue.4, 2003.

P. Germain, The method of virtual power in continuum mechanics, Microstructure. SIAM Journal on Applied Mathematics, vol.2, pp.556-575, 1973.

L. J. Gibson, M. F. Ashby, G. Karam, U. Wegst, and H. Shercliff, The mechanical properties of natural materials. ii. microstructures for mechanical efficiency, Proceedings of the Royal Society of London Series A: Mathematical and Physical Sciences, vol.450, pp.141-162, 1938.

I. Giorgio, L. Galantucci, D. Corte, A. , D. Vescovo et al., Piezo-electromechanical smart materials with distributed arrays of piezoelectric transducers: current and upcoming applications, International Journal of Applied Electromagnetics and Mechanics, vol.47, issue.4, pp.1051-1084, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01121358

I. Giorgio, U. Andreaus, and A. Madeo, The influence of different loads on the remodeling process of a bone and bioresorbable material mixture with voids, Continuum Mechanics and Thermodynamics, vol.28, issue.1-2, pp.21-40, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01094868

I. Giorgio, U. Andreaus, D. Scerrato, and F. Dell'isola, A visco-poroelastic model of functional adaptation in bones reconstructed with bio-resorbable materials, Biomechanics and modeling in mechanobiology, vol.15, issue.5, pp.1325-1343, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01270364

I. Giorgio, U. Andreaus, T. Lekszycki, and A. D. Corte, The influence of different geometries of matrix/scaffold on the remodeling process of a bone and bioresorbable material mixture with voids, Mathematics and Mechanics of Solids, vol.22, issue.5, pp.969-987, 2017.

M. Golaszewski, R. Grygoruk, G. I. Laudato, M. , D. Cosmo et al., Metamaterials with relative displacements in their microstructure: technological challenges in 3d printing, experiments and numerical predictions, Continuum Mechanics and Thermodynamics, vol.1, issue.20, 2018.

M. Grédiac and F. Hild, Full-field measurements and identification in solid mechanics, 2012.

N. Grillanda, A. Chiozzi, F. Bondi, A. Tralli, F. Manconi et al., Numerical insights on the structural assessment of historical masonry stellar vaults: the case of santa maria del monte in cagliari, Continuum Mechanics and Thermodynamics, pp.1-24, 2019.

V. Gunenthiram, P. Peyre, M. Schneider, M. Dal, F. Coste et al., Analysis of laser-melt pool-powder bed interaction during the selective laser melting of a stainless steel, Journal of Laser Applications, vol.29, issue.2, p.303, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01664637

A. Haboudou, P. Peyre, and A. Vannes, Study of keyhole and melt pool oscillations in dual beam welding of aluminum alloys: effect on porosity formation, First International Symposium on High-Power Laser Macroprocessing, International Society for Optics and Photonics, vol.4831, pp.295-301, 2003.

M. Heckele and W. Schomburg, Review on micro molding of thermoplastic polymers, Journal of Micromechanics and Microengineering, vol.14, issue.3, p.1, 2003.

F. Hild and S. Roux, Comparison of local and global approaches to digital image correlation, Experimental Mechanics, vol.52, issue.9, pp.1503-1519, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00750756

F. Hild and S. Roux, Digital image correlation, Optical Methods for Solid Mechanics. A Full-Field Approach, pp.183-228, 2012.
URL : https://hal.archives-ouvertes.fr/hal-02310247

F. Hild, B. Raka, M. Baudequin, S. Roux, and F. Cantelaube, Multi-scale displacement field measurements of compressed mineral wool samples by digital image correlation, Appl Optics IP, vol.41, issue.32, pp.6815-6828, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00002901

H. Jia, M. Ke, R. Hao, Y. Ye, F. Liu et al., Subwavelength imaging by a simple planar acoustic superlens, Applied Physics Letters, vol.97, issue.17, p.507, 2010.

M. Kadic, T. Bückmann, N. Stenger, M. Thiel, and M. Wegener, On the practicability of pentamode mechanical metamaterials, Applied Physics Letters, vol.100, p.901, 2012.

S. Khakalo and J. Niiranen, Isogeometric analysis of higher-order gradient elasticity by user elements of a commercial finite element software, Computer-Aided Design, vol.82, pp.154-169, 2017.

S. Khakalo and J. Niiranen, Form ii of mindlin's second strain gradient theory of elasticity with a simplification: For materials and structures from nano-to macro-scales, European Journal of Mechanics-A/Solids, vol.71, pp.292-319, 2018.

R. Lakes, Foam structures with a negative poisson's ratio, Science, vol.235, pp.1038-1041, 1987.

, Lakes R (1993) Materials with structural hierarchy, Nature, vol.361, issue.6412, p.511

M. Laudato, L. Manzari, E. Barchiesi, D. Cosmo, F. Göransson et al., First experimental observation of the dynamical behavior of a pantographic metamaterial, Mechanics Research Communications, vol.94, pp.125-127, 2018.

H. Leclerc, J. Périé, S. Roux, and F. Hild, Integrated digital image correlation for the identification of mechanical properties, Computer Vision/Computer Graphics CollaborationTechniques, vol.5496, pp.161-171, 2009.
URL : https://hal.archives-ouvertes.fr/hal-02194289

J. H. Lee, J. P. Singer, and E. L. Thomas, Micro-/nanostructured mechanical metamaterials, Advanced materials, vol.24, issue.36, pp.4782-4810, 2012.

T. Lekszycki and F. Isola, A mixture model with evolving mass densities for describing synthesis and resorption phenomena in bones reconstructed with bio-resorbable materials, ZAMM-Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik, vol.92, issue.6, pp.426-444, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00634733

Y. Liu, M. S. Greene, W. Chen, D. A. Dikin, and W. K. Liu, Computational microstructure characterization and reconstruction for stochastic multiscale material design, Computer-Aided Design, vol.45, issue.1, pp.65-76, 2013.

Z. Liu, X. Zhang, Y. Mao, Y. Zhu, Z. Yang et al., Locally resonant sonic materials, science, vol.289, issue.5485, pp.1734-1736, 2000.

Z. Liu, H. Lee, Y. Xiong, C. Sun, and X. Zhang, Far-field optical hyperlens magnifying sub-diffractionlimited objects, science, vol.315, issue.5819, pp.1686-1686, 2007.

A. Luongo and D. Zulli, Dynamic instability of inclined cables under combined wind flow and support motion, Nonlinear Dynamics, vol.67, issue.1, pp.71-87, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00788394

A. Luongo, D. Zulli, and G. Piccardo, Analytical and numerical approaches to nonlinear galloping of internally resonant suspended cables, Journal of Sound and Vibration, vol.315, issue.3, pp.375-393, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00788555

A. Madeo, T. Lekszycki, and F. Dell'isola, A continuum model for the bio-mechanical interactions between living tissue and bio-resorbable graft after bone reconstructive surgery, Comptes Rendus Mécanique, vol.339, issue.10, pp.625-640, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00609793

A. Madeo, D. George, T. Lekszycki, M. Nierenberger, and Y. Rémond, A second gradient continuum model accounting for some effects of micro-structure on reconstructed bone remodelling, Comptes Rendus Mécanique, vol.340, issue.8, pp.575-589, 2012.

M. J. Madou, Manufacturing techniques for microfabrication and nanotechnology, vol.2, 2011.

A. Maggi, H. Li, and J. R. Greer, Three-dimensional nano-architected scaffolds with tunable stiffness for efficient bone tissue growth, Acta Biomaterialia, vol.63, pp.294-305, 2017.

T. Masuzawa, M. Fujino, K. Kobayashi, T. Suzuki, and N. Kinoshita, Wire electro-discharge grinding for micro-machining, CIRP Annals, vol.34, issue.1, pp.431-434, 1985.

F. Mathieu, H. Leclerc, F. Hild, and S. Roux, Estimation of elastoplastic parameters via weighted FEMU and integrated-DIC, Exp Mech, vol.55, issue.1, pp.105-119, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01166755

R. D. Mindlin, Second gradient of strain and surface-tension in linear elasticity, International Journal of Solids and Structures, vol.1, issue.4, pp.417-438, 1965.

A. Misra, T. Lekszycki, G. I. Ganzosch, G. Müller, W. H. Dell'isola et al., Pantographic metamaterials show atypical Poynting effect reversal, Mechanics Research Communications, vol.89, pp.6-10, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01724940

J. Niiranen, S. Khakalo, V. Balobanov, and A. H. Niemi, Variational formulation and isogeometric analysis for fourth-order boundary value problems of gradient-elastic bar and plane strain/stress problems, Computer Methods in Applied Mechanics and Engineering, vol.308, pp.182-211, 2016.

J. Niiranen, J. Kiendl, A. H. Niemi, and A. Reali, Isogeometric analysis for sixth-order boundary value problems of gradient-elastic kirchhoff plates, Computer Methods in Applied Mechanics and Engineering, vol.316, pp.328-348, 2017.

A. N. Norris, Acoustic metafluids, The Journal of the Acoustical Society of America, vol.125, issue.2, pp.839-849, 2009.

J. G. Ok, H. Seok-youn, K. Kwak, M. Lee, K. T. et al., Continuous and scalable fabrication of flexible metamaterial films via roll-to-roll nanoimprint process for broadband plasmonic infrared filters, Applied Physics Letters, vol.101, issue.22, p.102, 2012.

S. Pearton, C. Abernathy, F. Ren, J. Lothian, P. Wisk et al., Dry and wet etching characteristics of inn, aln, and gan deposited by electron cyclotron resonance metalorganic molecular beam epitaxy, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.11, issue.4, pp.1772-1775, 1993.

J. B. Pendry, A. Holden, W. Stewart, and I. Youngs, Extremely low frequency plasmons in metallic mesostructures, Physical review letters, vol.76, issue.25, p.4773, 1996.

G. Piccardo, G. Ranzi, and A. Luongo, A complete dynamic approach to the generalized beam theory cross-section analysis including extension and shear modes, Mathematics and Mechanics of Solids, vol.19, issue.8, pp.900-924, 2014.

L. Placidi, G. Rosi, G. I. Madeo, and A. , Reflection and transmission of plane waves at surfaces carrying material properties and embedded in second-gradient materials, Mathematics and Mechanics of Solids, vol.19, issue.5, pp.555-578, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01167200

L. Placidi, U. Andreaus, and G. I. , Identification of two-dimensional pantographic structure via a linear D4 orthotropic second gradient elastic model, Journal of Engineering Mathematics, vol.103, issue.1, pp.1-21, 2017.

L. Placidi, E. Barchiesi, and A. Battista, An inverse method to get further analytical solutions for a class of metamaterials aimed to validate numerical integrations, Mathematical Modelling in Solid Mechanics, pp.193-210, 2017.

S. Quiligotti, G. A. Maugin, and F. Dell'isola, Wave motions in unbounded poroelastic solids infused with compressible fluids, Zeitschrift für angewandte Mathematik und Physik ZAMP, vol.53, issue.6, pp.1110-1138, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00502070

G. Rosi, I. Giorgio, and V. A. Eremeyev, Propagation of linear compression waves through plane interfacial layers and mass adsorption in second gradient fluids, ZAMM-Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik, vol.93, issue.12, pp.914-927, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01167209

R. C. Rumpf, J. Pazos, C. R. Garcia, L. Ochoa, and R. Wicker, ) 3d printed lattices with spatially variant self-collimation, Progress In Electromagnetics Research, vol.139, pp.1-14, 2013.

D. Scerrato, I. Giorgio, and N. L. Rizzi, Three-dimensional instabilities of pantographic sheets with parabolic lattices: numerical investigations, Zeitschrift für angewandte Mathematik und Physik, vol.67, issue.3, p.53, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01305927

P. Seppecher, J. J. Alibert, and F. Dell'isola, Linear elastic trusses leading to continua with exotic mechanical interactions, Journal of Physics: Conference Series, vol.319, issue.1, p.18, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00630098

M. Sutton, Computer vision-based, noncontacting deformation measurements in mechanics: A generational transformation, Appl Mech Rev, vol.65, p.802, 2013.

M. Sutton, J. Orteu, and H. Schreier, Image correlation for shape, motion and deformation measurements: basic concepts, Springer Science & Business Media Teo WE, Ramakrishna S (2006) A review on electrospinning design and nanofibre assemblies, vol.17, p.89, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01729219

Z. Tomi?evi?, F. Hild, and S. Roux, Mechanics-aided digital image correlation, The Journal of Strain Analysis for Engineering Design, vol.48, issue.5, pp.330-343, 2013.

E. Turco, F. Isola, A. Cazzani, and N. L. Rizzi, Hencky-type discrete model for pantographic structures: numerical comparison with second gradient continuum models, Zeitschrift für angewandte Mathematik und Physik, vol.67, issue.4, p.85, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01345864

E. Turco, M. Golaszewski, A. Cazzani, and N. L. Rizzi, Large deformations induced in planar pantographic sheets by loads applied on fibers: experimental validation of a discrete lagrangian model, Mechanics Research Communications, vol.76, pp.51-56, 2016.

E. Turco, G. I. Misra, A. Dell'isola, and F. , King post truss as a motif for internal structure of (meta) material with controlled elastic properties, Royal Society open science, vol.4, issue.10, p.153, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01619106

E. Turco, M. Golaszewski, G. I. , D. 'annibale, and F. , Pantographic lattices with non-orthogonal fibres: Experiments and their numerical simulations, Composites Part B: Engineering, vol.118, pp.1-14, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01443679

E. Turco, A. Misra, M. Pawlikowski, F. Isola, and F. Hild, Enhanced piola-hencky discrete models for pantographic sheets with pivots without deformation energy: Numerics and experiments, International Journal of Solids and Structures, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01791894

Z. Vangelatos, K. Komvopoulos, and C. Grigoropoulos, Vacancies for controlling the behavior of microstructured three-dimensional mechanical metamaterials, p.1081286518810739, 2018.

Z. Vangelatos, V. Melissinaki, M. Farsari, K. Komvopoulos, and C. Grigoropoulos, Intertwined microlattices greatly enhance the performance of mechanical metamaterials, Mathematics and Mechanics, p.1081286519848041, 2019.

V. Veselago, Properties of materials having simultaneously negative values of the dielectric and magnetic susceptibilities, Soviet Physics Solid State USSR, vol.8, pp.2854-2856, 1967.

V. G. Veselago, The electrodynamics of substances with simultaneously negative values of and ?, Soviet physics uspekhi, vol.10, issue.4, p.509, 1968.

U. G. Wegst, H. Bai, E. Saiz, A. P. Tomsia, and R. O. Ritchie, Bioinspired structural materials, Nature materials, vol.14, issue.1, p.23, 2015.

S. Zhang, L. Yin, and N. Fang, Focusing ultrasound with an acoustic metamaterial network, Physical review letters, vol.102, p.301, 2009.