S. R. Eugster, Geometric Continuum Mechanics and Induced Beam Theories, vol.75, 2015.

D. N. Arnold, A. L. Madureira, and S. Zhang, On the range of applicability of the Reissner-Mindlin and Kirchhoff-Love plate bending models, J. Elasticity, vol.67, pp.171-185, 2002.

E. Benvenuto, , 1981.

R. Ballarini, The da Vinci-Euler-Bernoulli beam theory?, Mech. Eng. Mag. Online, p.7, 2003.

C. , The Mechanics of Leonardo Da Vinci, 1968.

I. Elishakoff, Who developed the so-called Timoshenko beam theory?, Math. Mech. Solids, pp.1-20, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02422172

A. Della-corte, A. Battista, F. Isola, and P. Seppecher, Large deformations of Timoshenko and Euler beams under distributed load, Z. Angew. Math. Phys, vol.70, issue.2, p.52, 2019.

V. L. Berdichevskii and L. A. , Starosel'skii, On the theory of curvilinear Timoshenkotype rods, J. Appl. Math. Mech, vol.47, issue.6, pp.809-817, 1983.

A. Cazzani, F. Stochino, and E. Turco, On the whole spectrum of Timoshenko beams. Part I: a theoretical revisitation, Z. Angew. Math. Phys, vol.67, issue.24, pp.1-30, 2016.

A. Cazzani, F. Stochino, and E. Turco, On the whole spectrum of Timoshenko beams. Part II: further applications, Z. Angew. Math. Phys, vol.67, issue.25, pp.1-21, 2016.

A. Luu, N. Kim, and J. Lee, Isogeometric vibration analysis of free-form Timoshenko curved beams, Meccanica, 2014.

V. Balobanov and J. Niiranen, Locking-free variational formulations and isogeometric analysis for the Timoshenko beam models of strain gradient and classical elasticity, Comput. Methods Appl. Mech. Engrg, vol.339, pp.137-159, 2018.

J. Kiendl, F. Auricchio, T. J. Hughes, and A. Reali, Single-variable formulations and isogeometric discretizations for shear deformable beams, Comput. Methods Appl. Mech. Engrg, vol.284, pp.988-1004, 2015.

A. Cazzani, F. Stochino, and E. Turco, An analytical assessment of finite elements and isogeometric analysis of the whole spectrum of Timoshenko beams, J. Appl. Math. Mech./Z. Angew. Math. Mech, vol.96, issue.10, pp.1220-1244, 2016.

L. R. Meza, G. P. Phlipot, C. M. Portela, A. Maggi, L. C. Montemayor et al., Reexamining the mechanical property space of three-dimensional lattice architectures, Acta Mater, vol.140, pp.424-432, 2017.

L. R. Meza, S. Das, and J. R. Greer, Strong, lightweight, and recoverable three-dimensional ceramic nanolattices, Science, vol.345, issue.6202, pp.1322-1326, 2014.

A. Gross, P. Pantidis, K. Bertoldi, and S. Gerasimidis, Correlation between topology and elastic properties of imperfect truss-lattice materials, J. Mech. Phys. Solids, vol.124, pp.577-598, 2019.

Z. Vangelatos, K. Komvopoulos, and C. Grigoropoulos, Vacancies for controlling the behavior of microstructured three-dimensional mechanical metamaterials, Math. Mech. Solids, vol.24, issue.2, pp.577-598, 2018.

Z. Vangelatos, V. Melissinaki, M. Farsari, K. Komvopoulos, and C. , Grigoropoulos, Intertwined microlattices greatly enhance the performance of mechanical metamaterials, Math. Mech. Solids, vol.24, issue.8, pp.2636-2648, 2019.

E. Marino, Isogeometric collocation for three-dimensional geometrically exact shear-deformable beams, Comput. Methods Appl. Mech. Engrg, vol.307, pp.383-410, 2016.

E. Marino, Locking-free isogeometric collocation formulation for threedimensional geometrically exact shear-deformable beams with arbitrary initial curvature, Comput. Methods Appl. Mech. Engrg, vol.324, pp.546-572, 2017.

J. C. Simo, A finite strain beam formulation. The three-dimensional dynamic problem. Part I, Comput. Methods Appl. Mech. Engrg, vol.49, issue.1, pp.55-70, 1985.

A. Della-corte, F. Isola, R. Esposito, and M. Pulvirenti, Equilibria of a clamped Euler beam (Elastica) with distributed load: Large deformations, Math. Models Methods Appl. Sci, vol.27, issue.8, pp.1391-1421, 2017.

F. Isola, P. Seppecher, M. Spagnuolo, E. Barchiesi, F. Hild et al., Advances in pantographic structures: design, manufacturing, models, experiments and image analyses, Contin. Mech. Thermodyn, vol.31, issue.4, pp.1231-1282, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02156824

F. Isola, P. Seppecher, J. J. Alibert, T. Lekszycki, R. Grygoruk et al., Pantographic metamaterials: an example of mathematically driven design and of its technological challenges, Contin. Mech. Thermodyn, vol.31, issue.4, pp.851-884, 2019.
URL : https://hal.archives-ouvertes.fr/hal-01808115

H. Hencky, Über die angenäherte Lösung von Stabilitätsproblemen im Raum mittels der elastischen Gelenkkette, 1921.

C. M. Wang, H. Zhang, R. P. Gao, W. H. Duan, and N. Challamel, Hencky bar-chain model for buckling and vibration of beams with elastic end restraints, Int. J. Struct. Stab. Dyn, p.1540007, 2014.

N. Challamel, A. Kocsis, and C. M. Wang, Discrete and non-local elastica, Int. J. Non-Linear Mech, vol.77, pp.128-140, 2015.

L. Greco and M. Cuomo, An implicit 1 multi patch B-spline interpolation for Kirchhoff-Love space rod, Comput. Methods Appl. Mech. Engrg, vol.269, pp.173-197, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00874299

L. Greco and M. Cuomo, An isogeometric implicit G 1 mixed finite element for Kirchhoff space rods, Comput. Methods Appl. Mech. Engrg, vol.298, pp.325-349, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01254899

B. E. Abali, W. H. Müller, and V. A. Eremeyev, Strain gradient elasticity with geometric nonlinearities and its computational evaluation, Adv. Mater. Modern Process, vol.1, issue.4, pp.1-11, 2015.

V. A. Eremeyev and H. Altenbach, Basics of Mechanics of Micropolar Shells, vol.572, 2017.

E. Turco, Discrete is it enough? The revival of Piola-Hencky keynotes to analyze three-dimensional, Elastica. Contin. Mech. Thermodyn, vol.30, issue.5, pp.1039-1057, 2018.

E. Riks, The application of Newton's method to the problem of elastic stability, J. Appl. Mech. Trans. ASME 39 Ser E, issue.4, pp.1060-1065, 1972.

O. Rodrigues, Des lois géométriques qui régissent les déplacements d'un système solide dans l'espace, et de la variation des coordonnées provenant de ces déplacements considérés indépendamment des causes qui peuvent les produire, J. Math. Appl, vol.1, issue.5, pp.380-440, 1840.

E. Turco, F. Isola, A. Cazzani, and N. L. Rizzi, Hencky-type discrete model for pantographic structures: numerical comparison with second gradient continuum models, Z. Angew. Math. Phys, vol.67, issue.85, pp.1-28, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01345864

P. Wriggers, Nonlinear Finite Element Methods, 2008.

M. J. Clarke and G. J. Hancock, A study of incremental-iterative strategies for non-linear analyses, Internat. J. Numer. Methods Engrg, vol.29, pp.1365-1391, 1990.

G. R. Cowper, The shear coefficient in Timoshenko's beam theory, J. Appl. Mech, vol.33, pp.335-340, 1966.

F. Isola, A. Della-corte, A. Battista, and E. Barchiesi, Extensible beam models in large deformation under distributed loading: A numerical study on multiplicity of solutions, Higher Gradient Materials and Related Generalized Continua, vol.120, 2019.

J. Roorda and A. H. Chilver, Frame buckling: an illustration of the perturbation technique, Int. J. Non-Linear Mech, vol.5, pp.235-246, 1970.

M. Pignataro, N. Rizzi, and A. D. Carlo, Symmetric bifurcation of plane frames through a modified potential energy approach, J. Struct. Mech, vol.8, issue.3, pp.237-255, 1980.

S. P. Timoshenko and J. M. Gere, Theory of Elastic Stability, 1961.

D. Baroudi, I. Giorgio, A. Battista, E. Turco, and L. I. Igumnov, Nonlinear dynamics of uniformly loaded elastica: Experimental and numerical evidence of motion around curled stable equilibrium configurations, Z. Angew. Math. Mech, vol.99, issue.7, pp.1-20, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02108277

A. Battista, A. Della-corte, F. Isola, and P. Seppecher, Large deformations of 1d microstructured systems modeled as generalized Timoshenko beams, Z. Angew. Math. Phys, vol.69, issue.3, p.52, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01625160

L. Beirão-da-veiga, C. Lovadina, and A. Reali, Avoiding shear locking for the Timoshenko beam problem via isogeometric collocation methods, Comput. Methods Appl. Mech. Engrg, pp.38-51, 2012.

F. Auricchio, L. Beirão-da-veiga, J. Kiendl, C. Lovadina, and A. Reali, Locking-free isogeometric collocation methods for spatial Timoshenko rods, Comput. Methods Appl. Mech. Engrg, vol.263, pp.113-126, 2013.

P. Seppecher, J. Alibert, and F. , Linear elastic trusses leading to continua with exotic mechanical interactions, J. Phys. Conf. Ser, vol.319, issue.1, p.12018, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00630098

A. Misra, T. Lekszycki, I. Giorgio, G. Ganzoch, W. H. Müller et al., Pantographic metamaterials show atypical poynting effect reversal, Mech. Res. Commun, vol.89, pp.6-10, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01724940

M. Angelo, E. Barchiesi, I. Giorgio, and B. E. Abali, Numerical identification of constitutive parameters in reduced order bi-dimensional models for pantographic structures: application to out-of-plane buckling, Arch. Appl. Mech, vol.89, issue.7, pp.1333-1358, 2019.

E. Turco, A. Misra, R. Sarikaya, and T. Lekszycki, Quantitative analysis of deformation mechanisms in pantographic substructures: experiments and modeling, Contin. Mech. Thermodyn, vol.31, issue.1, pp.209-223, 2019.

C. Boutin, F. Isola, I. Giorgio, and L. Placidi, Asymptotic micro-macro models identification, Math. Mech. Complex Syst, vol.5, issue.2, pp.127-162, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01494280

I. Giorgio, F. Isola, and D. J. Steigmann, Axisymmetric deformations of a 2nd grade elastic cylinder, Mech. Res. Commun, vol.94, pp.45-48, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01870649

I. Giorgio, F. Isola, and D. J. Steigmann, Edge effects in hypar nets, C. R. Méc, vol.347, pp.114-123, 2019.
URL : https://hal.archives-ouvertes.fr/hal-01983998

E. Barchiesi, G. Ganzosch, C. Liebold, L. Placidi, R. Grygoruk et al., Outof-plane buckling of pantographic fabrics in displacement-controlled shear tests: experimental results and model validation, Contin. Mech. Thermodyn, vol.31, pp.33-45, 2019.

L. Placidi, F. Isola, and E. Barchiesi, Heuristic homogenization of Euler and pantographic beams, Mechanics of Fibrous Materials and Applications, pp.123-155
URL : https://hal.archives-ouvertes.fr/hal-02470313

E. Barchiesi, S. R. Eugster, L. Placidi, and F. , Pantographic beam: A complete second gradient 1D-continuum in plane, Z. Angew. Math. Phys, vol.70, issue.135, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02268142

H. Abdoul-anziz and P. Seppecher, Strain gradient and generalized continua obtained by homogenizing frame lattices, Math. Mech. Complex Syst, vol.6, issue.3, pp.213-250, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01672898

H. Abdoul-anziz, P. Seppecher, and C. Bellis, Homogenization of frame lattices leading to second gradient models coupling classical strain and strain-gradient terms, Math. Mech. Solids, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02305234

U. Andreaus, M. Spagnuolo, T. Lekszycki, and S. R. Eugster, A Ritz approach for the static analysis of planar pantographic structures modeled with nonlinear Euler-Bernoulli beams, Contin. Mech. Thermodyn, pp.1-21, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02453436

R. W. Ogden, Non-Linear Elastic Deformations, 1997.

Y. B. Fu and R. W. Ogden, Nonlinear stability analysis of pre-stressed elastic bodies, Contin. Mech. Thermodyn, vol.11, pp.141-172, 1999.

V. A. Eremeyev and L. M. Zubov, On the stability of elastic bodies with couple stresses, Mech. Solids, vol.29, issue.3, pp.172-181, 1994.

D. N. Sheydakov and H. Altenbach, Stability of inhomogeneous micropolar cylindrical tube subject to combined loads, Math. Mech. Solids, vol.21, issue.9, pp.1082-1094, 2016.

R. S. Lakes, Stability of Cosserat solids: size effects, ellipticity and waves, J. Mech. Mater. Struct, vol.13, issue.1, pp.83-91, 2018.

Y. Solyaev, S. Lurie, E. Barchiesi, and L. Placidi, On the dependence of standard and gradient elastic material constants on a field of defects, Math. Mech. Solids, 2019.

A. Misra and P. Poorsolhjouy, Identification of higher-order elastic constants for grain assemblies based upon granular micromechanics, Math. Mech. Complex Syst, vol.3, issue.3, pp.285-308, 2015.

C. Pideri and P. Seppecher, A second gradient material resulting from the homogenization of an heterogeneous linear elastic medium, Contin. Mech. Thermodyn, vol.9, issue.5, pp.241-257, 1997.
URL : https://hal.archives-ouvertes.fr/hal-00527291

F. Isola, U. Andreaus, and L. Placidi, At the origins and in the vanguard of peridynamics, non-local and higher-gradient continuum mechanics: An underestimated and still topical contribution of Gabrio Piola, Math. Mech. Solids, vol.20, issue.8, pp.887-928, 2015.
URL : https://hal.archives-ouvertes.fr/hal-00869677

J. Niiranen, V. Balobanov, J. Kiendl, and S. B. Hosseini, Variational formulations, model comparisons and numerical methods for Euler-Bernoulli micro-and nano-beam models, Math. Mech. Solids, vol.24, issue.1, pp.312-335, 2019.

I. Giorgio and D. D. Vescovo, Energy-based trajectory tracking and vibration control for multi-link highly flexible manipulators, Math. Mech. Complex Syst, vol.7, issue.2, pp.159-174, 2019.

I. Giorgio and D. D. Vescovo, Non-linear lumped-parameter modeling of planar multi-link manipulators with highly flexible arms, Robotics, vol.7, issue.4, 2018.

I. Giorgio, A. Della-corte, and F. , Dynamics of 1D nonlinear pantographic continua, Nonlinear Dynam, vol.88, issue.1, pp.21-31, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01400478

J. Chró?cielewski, R. Schmidt, and V. A. Eremeyev, Nonlinear finite element modeling of vibration control of plane rod-type structural members with integrated piezoelectric patches, Contin. Mech. Thermodyn, vol.31, issue.1, pp.147-188, 2019.

L. Greco, M. Cuomo, and L. Contrafatto, A reconstructed local?formulation for isogeometric Kirchhoff-Love shells, Comput. Methods Appl. Mech. Engrg, vol.332, pp.462-487, 2018.

L. Greco, M. Cuomo, and L. Contrafatto, A quadrilateral G1-conforming finite element for the Kirchhoff plate model, Comput. Methods Appl. Mech. Engrg, vol.346, pp.913-951, 2019.

L. Greco, M. Cuomo, and L. Contrafatto, Two new triangular G1-conforming finite elements with cubic edge rotation for the analysis of Kirchhoff plates, Comput. Methods Appl. Mech. Engrg, vol.356, pp.354-386, 2019.

S. T. Yaghoubi, V. Balobanov, S. M. Mousavi, and J. Niiranen, Variational formulations and isogeometric analysis for the dynamics of anisotropic gradient-elastic Euler-Bernoulli and shear-deformable beams, Eur. J. Mech. A Solids, vol.69, pp.113-123, 2018.