M. V. Hosur, M. Adbullah, and S. Jeelani, Studies on the low-velocity impact response of woven hybrid composites, Compos Struct, vol.67, pp.253-62, 2005.

C. Atas and O. Sayman, An overall view on impact response of woven fabric composite plates, Compos Struct, vol.82, pp.336-381, 2008.

R. Bagheri and R. A. Pearson, Role of particle cavitation in rubber-toughened epoxies: 1. Microvoid toughening, Polymer, vol.37, pp.4529-4567, 1996.

D. J. Hourston and J. M. Lane, The toughening of epoxy resins with thermoplastics: 1. Trifunctional epoxy resin-polyetherimide blends, Polymer, vol.33, pp.1379-83, 1992.

B. Vieille, V. M. Casado, and C. Bouvet, Influence of matrix toughness and ductility on the compression-after-impact behavior of woven-ply thermoplastic-and thermosetting-composites: a comparative study, Compos Struct, vol.110, pp.207-225, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00941315

Z. Wang, C. Xu, Y. Zhao, D. Zhao, Z. Wang et al., Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites, Mater Sci Eng A, vol.490, pp.481-488, 2008.

R. Matadi, A. Makradi, S. Ahzi, J. G. Sieffert, E. S. Rush et al., Preparation, structural characterization, and thermomechanical properties of poly(methyl methacrylate)/organoclay nanocomposites by melt intercalation, J Nanosci Nanotechnol, vol.9, pp.2923-2953, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00426815

M. S. Goyat, S. Ray, and P. K. Ghosh, Innovative application of ultrasonic mixing to produce homogeneously mixed nanoparticulate-epoxy composite of improved physical properties, Composites Part A, vol.42, pp.1421-1452, 2011.

M. Boumbimba, R. Wang, K. Bahlouli, N. Ahzi, S. Rémond et al., Experimental investigation and micromechanical modeling of high strain rate compressive yield stress of a melt mixing polypropylene organoclay nanocomposites, Mech Mater, vol.52, pp.58-68, 2012.

M. Boumbimba, R. Bouquey, M. Muller, R. Jourdainne, L. Triki et al., Dispersion and morphology of polypropylene nanocomposites: characterization based on a compact and flexible optical sensor, Polym Test, vol.31, pp.800-809, 2012.

C. Chen, R. S. Justice, D. W. Schaefer, and J. W. Baur, Highly dispersed nanosilica-epoxy resins with enhanced mechanical properties, Polymer, vol.49, pp.3805-3820, 2008.

J. Ferreira, P. Reis, J. Costa, and M. Richardson, Fatigue behaviour of Kevlar composites with nanoclay-filled epoxy resin, J Compos Mater, vol.47, pp.1885-95, 2013.

F. H. Gojny, M. Wichmann, B. Fiedler, W. Bauhofer, and K. Schulte, Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites, Composites Part A, vol.36, pp.1525-1560, 2005.

M. V. Hosur, A. A. Mohammed, S. Zainuddin, and S. Jeelani, Processing of nanoclay filled sandwich composites and their response to low-velocity impact loading, Compos Struct, vol.82, pp.101-117, 2008.

A. F. Ávila, M. Carvalho, E. C. Dias, and D. Da-cruz, Nano-structured sandwich composites response to low-velocity impact, Compos Struct, vol.92, pp.745-51, 2010.

S. Bruzaud and A. Bourmaud, Thermal degradation and (nano)mechanical behavior of layered silicate reinforced poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nanocomposites, Polym Test, vol.26, pp.652-661, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00400210

F. Yi, R. Yu, S. Zheng, and X. Li, Nanostructured thermosets from epoxy and poly(2,2,2-trifluoroethyl acrylate)-block-poly(glycidyl methacrylate) diblock copolymer: demixing of reactive blocks and thermomechanical properties, Polymer, vol.52, pp.5669-80, 2011.

, Arkema launches Nanostrength for advanced composite materials, Additives for Polymers, p.3, 2005.

M. T. Bashar, U. Sundararaj, and P. Mertiny, Mode-I interlaminar fracture behaviour of nanoparticle modified epoxy/basalt fibre-reinforced laminates, Polym Test, vol.32, pp.402-414, 2013.

S. Denneulin, P. Viot, F. Leonardi, and J. Lataillade, The influence of acrylate triblock copolymer embedded in matrix on composite structures' responses to lowvelocity impacts, Compos Struct, vol.94, pp.1471-81, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00871577

T. A. Tran, F. Leonardi, S. Bourrigaud, P. Gerard, and C. Derail, All acrylic block copolymers based on poly (methyl methacrylate) and poly (butyl acrylate). A link between the physico-chemical properties and the mechanical behaviour on impact tests, Polym Test, vol.27, pp.945-50, 2008.
URL : https://hal.archives-ouvertes.fr/hal-01615996

X. Yang, F. Yi, Z. Xin, and S. Zheng, Morphology and mechanical properties of nanostructured blends of epoxy resin with poly(e-caprolactone)-blockpoly(butadiene-co-acrylonitrile)-block-poly(e-caprolactone) triblock copolymer, Polymer, vol.50, pp.4089-100, 2009.

F. Sarasini, J. Tirillò, M. Valente, T. Valente, S. Cioffi et al., Effect of basalt fiber hybridization on the impact behavior under low impact velocity of glass/ basalt woven fabric/epoxy resin composites, Composites Part A, vol.47, pp.109-132, 2013.

S. Sihn, R. Y. Kim, W. Huh, K. H. Lee, and A. K. Roy, Improvement of damage resistance in laminated composites with electrospun nano-interlayers, Compos Sci Technol, vol.68, pp.673-83, 2008.

J. Lankford, Micromechanisms of compressive failure in a glass fibre-reinforced amorphous thermoplastic, J Mater Sci, vol.28, pp.3027-3061, 1993.

K. Wang, M. Boumbimba, R. Bahlouli, N. Muller, R. Bouquey et al., Dynamic compressive behavior of a melt mixed polypropylene/organoclay nanocomposites, J Eng Mater Technol, vol.134, p.10905, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00662600

P. Reis, J. Ferreira, Z. Y. Zhang, T. Benameur, and M. Richardson, Impact response of Kevlar composites with nanoclay enhanced epoxy matrix, Composites Part B, vol.46, pp.7-14, 2013.

I. Taraghi, A. Fereidoon, and F. Taheri-behrooz, Low-velocity impact response of woven Kevlar/epoxy laminated composites reinforced with multi-walled carbon nanotubes at ambient and low temperatures, Mater Des, vol.53, pp.152-160, 2014.

E. M. Soliman, M. P. Sheyka, and M. R. Taha, Low-velocity impact of thin woven carbon fabric composites incorporating multi-walled carbon nanotubes, Int J Impact Eng, vol.47, pp.39-47, 2012.