Realization and simulation of high power holmium doped fiber laser for long-range transmission

Julien Le Gouët (1) , François Gustave (1) , Pierre Bourdon (1) , Thierry Robin (2) , Arnaud Laurent (2) , Benoît Cadier (2)

1 DOTA, ONERA, Université Paris Saclay [Palaiseau]
2 iXBlue Photonics

We report on our realization of a high power holmium doped fiber laser, together with the validation of our numerical simulation of the laser. We first present the measurements of the physical parameters that are mandatory to model accurately the laser-holmium interactions in our silica fiber. We then describe the realization of the clad-pumped laser, based on a triple-clad large mode area holmium (Ho) doped silica fiber. The output signal power is 90 W at 2120 nm, with an efficiency of about 50% with respect to the coupled pump power. This efficiency corresponds to the state of the art for clad-pumped Ho-doped fiber lasers in the 100 W power class. By comparing the experimental results to our simulation, we demonstrate its validity, and use it to show that the efficiency is limited, for our fiber, by the non-saturable absorption caused by pair induced quenching between adjacent holmium ions.

Mots clés: Fiber laser; Holmium; High-powered laser; Infrared laser; Laser source; Silica fibers

Domaines: Optique / photonique

Julien Le Gouët, François Gustave, Pierre Bourdon, Thierry Robin, Arnaud Laurent, et al.. Realization and simulation of high power holmium doped fiber laser for long-range transmission. Optics Express, 2020, 28 (15), pp.22307-22320. ⟨10.1364/OE.394011⟩. ⟨hal-02873591v2⟩