. Kato-engineering-inc, E ngineering Report: Form-Wound Coils, Random-Wound Coils, 2001.

V. Mihaila, S. Duchesne, D. Roger, and P. Y. , Liegeois: Prediction of the turnto-turn voltages in parallel connected wires configuration for motor coils fed by steep fronted pulses, Electrical Insulation Conference, 2011.

, IEC 60050-212:2010 International Electrotechnical Vocabulary -Part 212: Electrical insulating solids, liquids and gases, 2010.

, Rotating electrical machines -Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters -Qualification and quality control tests, 2014.

, Rotating electrical machines -Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters -Qualification tests, 2017.

G. C. Stone, E. A. Boulter, I. Culbert, and H. Dhirani, Electrical Insulation for Rotating Machines. Design, Evaluation, Aging, Testing, and Repair, 2004.

M. Chapman, N. Frost, and R. Bruetsch, Insulation Systems for Rotating Low-Voltage Machines, IEEE International Symposium on Electrical Insulation, pp.257-260, 2008.

, Specifications for particular types of winding wires -Part 0-7 : general requirements -Fully insulated (FIW) zero-defect enamelled round copper wire, IEC, 2017.

, IEC 60317-0-1:2013 Specifications for particular types of winding wires, 2013.

, NEMA MW 1000-2016, Magnet Wire, National Electrical Manufacturers Association standard, 2016.

P. , I. No, P. V. Schlögl, S. Sumereder, C. Muhr et al., Proprieties of Polymer Composites Used in High-Voltage Applications, vol.8, 2016.

B. Taghia, B. Cougo, H. Piquet, D. Malec, A. Belinger et al., Advanced Analysis of Transient Overvoltage in Electromechanical Chain Fed by SiC Inverter, Electrimacs, 2017.

G. Feldmeier and D. Kupersmith, Applying dV/dT filters with AFDs, Application Paper AP043001EN, 2014.

E. Persson, Transient Effects in Application of PWM Inverters to Induction Motors, IEEE Transactions on Industry Applications, vol.28, issue.5, 1992.

P. Bidan, T. Lebey, and C. Neacsu, Development of a New Off-line Test Procedure for Low Voltage Rotating Machines Fed by Adjustable Speed Drives (ASD), IEEE Transactions on Dielectrics and Electrical Insulation, vol.10, issue.1, 2003.

F. Guastavino, F. Porcile, A. Ratto, D. Cordano, and G. Secondo, Electrical aging test and repetitive partial discharge inception voltage on random wire wound winding insulation, IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), pp.19-22, 2014.

R. A. Fisher, The Design of Experiments, 1935.

X. Zhu, B. Yan, L. Chen, R. Zhang, L. Quan et al., Multi-Objective Optimization Design of a Magnetic Planetary Geared Permanent Magnet Brushless Machine by Combined Design of Experiments and Response Surface Methods, IEEE Transactions on Magnetics, vol.50, issue.11, 2014.

J. M. Fragomeni, An Organizational Design of Experiments. Statistical Apporach to Investigate the Effect of Extrusion Process Manufacturing on the Mechanical Behavior of an Aluminum Alloy, International Conference on Engineering and Technology Management, IEMC '98, pp.11-14, 1998.

S. M. Nunes, T. Clé-de-oliveira, J. M. Carvalho-filho, and J. P. Gonçalves-de-abreu, Design of Experiments for Sensitivity Analysis of Voltage Sags Variables, IEEE 15th International Conference on Harmonics and Quality of Power, pp.398-402, 2012.

A. Zernig, O. Bluder, and G. Spöck, Optimal design of experiments for semiconductor lifetime data, 9th Conference on Ph.D. Research in Microelectronics and Electronics (PRIME), pp.285-288, 2013.

N. Lahoud, J. Faucher, D. Malec, and P. Maussion, Electrical aging of the insulation of low-voltage machines: model definition and test with the design of experiments, IEEE Transactions on Industrial Electronics, vol.60, issue.9, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00845292

Y. Khelil, P. Maussion, and T. Lebey, Experimental design for tracking the influent operating parameters on insulation reliability, IEEE International Symposium on Diagnostics for Electric Machines, 2009.

F. Salameh, A. Picot, M. Chabert, E. Leconte, A. Ruiz-gazen et al., Variable importance assessment in lifespan models of insulation materials: a comparative study, IEEE 10 th International Symposium on Diagnostics for Electrical Machines, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01375415

F. Salameh, A. Picot, M. Chabert, and P. Maussion, Parametric and Nonparametric Models for Lifespan Modeling of insulation Systems in Electrical Machines, IEEE Transactions on Industry Applications, vol.53, issue.3, pp.3119-3128, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01611696

, ReliaSoft Corporation: Experiment Design & Analysis Reference, 2018.

A. I. Khuri and J. A. Cornell, Response surfaces: designs and analyses, 1996.

W. , A statistical distribution function of wide applicability, J. Appl. Mech. -Trans. ASME, vol.18, issue.3, pp.293-297, 1951.

, Guide for the statistical analysis of electrical insulation breakdown data, IEC 62539 IEEE 930, pp.2007-2014

M. Szczepanski, D. Malec, P. Maussion, B. Petitgas, and P. Manfé, Prediction of the lifespan of enameled wires used in low voltage inverter-fed motors by using the Design of Experiments (DoE, 2017 IEEE Industry Applications Society Annual Meeting, 2017.

L. Benmamas, . Ph, G. Teste, E. Krebs, F. Odic1 et al., Contribution to Partial Discharge Analysis in Inverter-fed Motor Windings for Automotive Application, 2017 Electrical Insulation Conference, 2017.

, Electrical properties, vol.5, pp.60851-60856, 2008.

H. S. Endicott, B. D. Hatch, and R. G. Sohmen, Application of the Erying Model to Capacitor Aging Data, IEEE Trans. CP, vol.12, pp.34-40, 1965.

G. C. Montanari and L. Simoni, Aging Phenomenology and Modeling, IEEE Transactions on Electricla Insulation, vol.28, issue.5, pp.755-776, 1993.

M. Szczepanski, D. Malec, P. Maussion, B. Petitgas, and P. Manfé, Ozone concentration impact on the lifespan of enameled wires (conventional and corona-resistant) for low voltage rotating machines fed by inverters, IEEE 35 th Electrical Insulation Conference, 2017.

L. Simoni, G. Mazzanti, G. C. Montanari, and L. Lefebre, A general multistress life model for insulating materials with or without evidence for thresholds, IEEE Transactions on Electrical Insulation, vol.28, issue.3, pp.349-364, 1993.

G. C. Montanari, G. Mazzanti, D. Fabiani, M. Albertini, and G. Perego, Investigation of DC threshold of polyetylenes as a tool insulation characterization, Conference on Electrical Insulation and Dielectric Phenomena, vol.2, pp.559-563, 1999.

W. T. Starr and H. G. Steffen, Searching for threshold in voltage endurance, ICPADM, pp.285-294, 1985.

M. Szczepanski, D. Malec, P. Maussion, B. Petitgas, and P. Manfé, Use of Design of Experiments (DoE) predictive models as a method of comparison of enameled wires used in low voltage inverter-fed motors, IEEE Industry Applications Society Annual Meeting, 2018.