J. S. Bergstroem, Large strain time-dependent behavior of elastomeric materials, Phd dissertation, 1999.

H. Hoeksema, M. D. Vos, J. Verbelen, A. Pirayesh, and S. Monstrey, Scar management by means of occlusion and hydration: A comparative study of silicones versus a hydrating gel-cream, Burns, vol.39, issue.7, pp.1437-1448, 2013.

S. Zakaria, L. Yu, G. Kofod, and A. L. Skov, The influence of static pre-stretching on the mechanical ageing of filled silicone rubbers for dielectric elastomer applications, Materials Today Communications, vol.4, pp.204-213, 2015.

L. Guo, Y. Lv, Z. Deng, Y. Wang, and X. Zan, Tension testing of silicone rubber at high strain rates, Polymer Testing, vol.50, pp.270-275, 2016.

M. Amjadi, Y. J. Yoon, and I. Park, Ultra-stretchable and skin-mountable strain sensors using carbon nanotubes-ecoflex nanocomposites, Nanotechnology, vol.26, issue.37, p.375501, 2015.

J. L. Sparks, N. A. Vavalle, K. E. Kasting, B. Long, M. L. Tanaka et al., Use of silicone materials to simulate tissue biomechanics as related to deep tissue injury, p.375

, Advances in Skin & Wound Care, vol.28, issue.2, pp.59-68, 2015.

M. Hossain, D. K. Vu, and P. Steinmann, Experimental study and numerical modelling of VHB 4910 polymer, Computational Materials Science, vol.59, pp.65-74, 2012.

M. Johlitz, H. Steeb, S. Diebels, A. Chatzouridou, J. Batal et al., Experimental and theoretical investigation of nonlinear viscoelastic polyurethane systems, Journal of Materials Science, vol.42, issue.23, pp.9894-9904, 2007.

Z. Liao, M. Hossain, X. Yao, M. Mehnert, and P. Steinmann, On thermo-viscoelastic experimental characterization and numerical modelling of VHB polymer, International Journal of Non-Linear Mechanics, vol.385, p.103263, 2020.

M. Wissler and E. Mazza, Mechanical behavior of an acrylic elastomer used in dielectric elastomer actuators, Sensors and Actuators A: Physical, vol.134, issue.2, pp.494-504, 2007.

R. Sahu, K. Patra, and J. Szpunar, Experimental study and numerical modelling of creep and stress relax-390 ation of dielectric elastomers, Strain, vol.51, issue.1, pp.43-54, 2014.

T. Rey, G. Chagnon, J. L. Cam, and D. Favier, Influence of the temperature on the mechanical behaviour of filled and unfilled silicone rubbers, Polymer Testing, vol.32, issue.3, pp.492-501, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01073891

G. Chagnon, On the relevance of continuum damage mechanics as applied to the mullins effect in 395 elastomers, Journal of the Mechanics and Physics of Solids, vol.52, issue.7, pp.1627-1650, 2004.

L. Mullins, Softening of rubber by deformation, Rubber Chemistry and Technology, vol.42, issue.1, pp.339-362, 1969.

G. Weng, Cyclic stress relaxation of polycrystalline metals at elevated temperature, International Jour-400 nal of Solids and Structures, vol.19, issue.6, pp.541-550, 1983.

M. Gunawan, L. Davila, E. Wong, S. Mhaisalkar, T. Tsai et al., Static and cyclic relaxation studies in nonconductive adhesives, Thin Solid Films, pp.419-426, 2004.

D. Chiang, Modeling and characterization of cyclic relaxation and ratcheting using the distributed-405 element model, Applied Mathematical Modelling, vol.32, issue.4, pp.501-513, 2008.

S. Zhang and F. Xuan, Interaction of cyclic softening and stress relaxation of 9-12% cr steel under strain-controlled fatigue-creep condition: Experimental and modeling, International Journal of Plasticity, vol.98, pp.45-64, 2017.

L. Mullins and N. R. Tobin, Theoretical model for the elastic behavior of filler-reinforced vulcanized rubbers, Rubber Chemistry and Technology, vol.30, pp.555-571, 1957.

J. S. Bergstroem and M. C. Boyce, Constitutive modeling of the large strain time-dependent behavior of elastomers, Journal of the Mechanics and Physics of Solids, vol.46, issue.5, pp.75-81, 1998.

I. Stevenson, L. David, C. Gauthier, L. Arambourg, J. Davenas et al., Influence of SiO2 fillers on the irradiation ageing of silicone rubbers, Polymer, vol.42, issue.22, pp.470-470, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00475289

D. E. Hanson, M. Hawley, R. Houlton, K. Chitanvis, P. Rae et al., Stress softening experiments in silica-filled polydimethylsiloxane provide insight into a mechanism for the 420 mullins effect, Polymer, vol.46, issue.24, pp.10989-10995, 2005.

J. Diani, B. Fayolle, and P. Gilormini, A review on the mullins effect, European Polymer Journal, vol.45, issue.3, pp.601-612, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00773015

A. Dorfmann and R. Ogden, A constitutive model for the mullins effect with permanent set in particle-425 reinforced rubber, International Journal of Solids and Structures, vol.41, issue.7, pp.1855-1878, 2004.

M. Klppel and J. Schramm, A generalized tube model of rubber elasticity and stress softening of filler reinforced elastomer systems, Macromolecular Theory and Simulations, vol.9, issue.9, pp.742-754, 2000.

S. Wang and S. A. Chester, Experimental characterization and continuum modeling of inelasticity in filled rubber-like materials, International Journal of Solids and Structures, pp.125-136, 2018.

A. Lion, A constitutive model for carbon black filled rubber: Experimental investigations and mathematical representation, Continuum Mechanics and Thermodynamics, vol.8, issue.3, pp.153-169, 1996.

H. Qi and M. Boyce, Stress-strain behavior of thermoplastic polyurethanes, Mechanics of Materials, vol.37, issue.8, pp.817-839, 2005.

L. Guo and Y. Wang, High-rate tensile behavior of silicone rubber at various temperatures, Rubber Chemistry and Technology

X. Li, T. Bai, Z. Li, and L. Liu, Influence of the temperature on the hyper-elastic mechanical behavior of carbon black filled natural rubbers, Mechanics of Materials, vol.95, pp.136-145, 2016.

Z. Liao, X. Yao, L. Zhang, M. Hossain, J. Wang et al., Temperature and strain rate dependent large tensile deformation and tensile failure behavior of transparent polyurethane at intermediate strain rates, p.445

, International Journal of Impact Engineering, vol.129, pp.152-167, 2019.

Z. Rigbi, Reinforcement of rubber by carbon black, pp.21-68, 2005.

L. Yan, D. A. Dillard, R. L. West, L. D. Lower, and G. V. Gordon, Mullins effect recovery of a nanoparticle-450 filled polymer, Journal of Polymer Science Part B: Polymer Physics, vol.48, issue.21, pp.2207-2214, 2010.

S. Wang and S. A. Chester, Modeling thermal recovery of the mullins effect, Mechanics of Materials, vol.126, pp.88-98, 2018.

J. Plagge and M. Klueppel, Mullins effect revisited: Relaxation, recovery and high-strain damage, Mate-455 rials, Today Communications, vol.20, p.100588, 2019.