G. Achonduh, Q. Yang, and H. Alper, From alkenes to alcohols by cobalt-catalyzed hydroformylation-reduction, Tetrahedron, vol.71, pp.1241-1246, 2015.

A. Behr, A. J. Vorholt, K. A. Ostrowski, and T. Seidensticker, Towards resource efficient chemistry: Tandem reactions with renewables, Green Chem, vol.16, pp.982-1006, 2014.

H. A. Choudhury, S. Intikhab, S. Kalakul, M. Khan, R. Tafreshi et al., Designing a surrogate fuel for gas-to-liquid derived diesel, Energy & Fuels, vol.31, pp.11266-11279, 2017.

N. Duyckaerts, M. Bartsch, I. Trotus, N. Pfänder, A. Lorke et al., Intermediate Product Regulation in Tandem Solid Catalysts with Multimodal Porosity for High-Yield Synthetic Fuel Production, Angew. Chem. Int. Ed, vol.56, p.11480, 2017.

R. Edwards, S. Godwin, A. Krasenbrink, A. Huss, H. Maas et al., Well-to-wheels analysis of future automotive fuels and powertrains in the European context: tank-to-wheels report (TTW), version 4a, 2014.

J. T. Farrell, N. P. Cernansky, F. L. Dryer, C. K. Law, D. G. Friend et al., Development of an experimental database and kinetic models for surrogate diesel fuels, 2007.

R. Franke, D. Selent, and A. Börner, Applied hy droformylation, Chem. Rev, vol.112, pp.5675-5732, 2012.

G. D. Frey and O. Roelen, 75 Years of Oxo Synthesis -The Success Story of a Discovery at the OXEA Site Ruhrchemie, J. Organoment. Chem, vol.754, pp.5-7, 2014.

S. Fuchs, Synthesis of Industrial Primary Diamines via Intermediate Diols -Combining Hydroformylation, Hydrogenation and Amination, ChemCatChem, vol.10, pp.4126-4133, 2018.

A. García, J. Monsalve-serrano, D. Villalta, M. Zubel, and S. Pischinger, Potential of 1-octanol and di-n-butyl ether (DNBE) to improve the performance and reduce the emissions of a direct injected compression ignition diesel engine, Energy Convers. Manag, vol.177, pp.563-571, 2018.

B. Graziano, J. M. Perez, F. Kremer, S. Pischinger, M. A. Reddemann et al., Virtual Fuel Approach: a new simulative methodology to analyse effects of fuel properties on mixture formation in compression ignition combustion, 2014.

B. Heuser, F. Kremer, J. Julis, and W. Leitner, Optimization of Diesel Combustion and Emissions with Newly Derived Biogenic Alcohols, SAE Technical Paper Series, 2013.

H. Hoffmann and K. Lucka, Hardware-in-the-loop testing: Complete Commonrail System (CoCoS) and component testing as rapid and costefficient tool in the introduction of alternative fuels in the automotive sector, 11.Tagung Einspritzung und Kraftstoffe, pp.359-372, 2018.

H. Hoffmann, H. Vom-schloß, and W. J. Bartz, Development of a Non-Engine Fuel Injector Deposit Test for Al-ternative Fuels (ENIAK-Project), pp.613-615, 2013.

H. Hoffmann, A Contribution to the Investigation of Internal Diesel Injector Deposits, 2018.

H. Hoffmann, D. Sebastian, W. Koch, and K. Lucka, Development of a Non-Engine Fuel Injector Deposit Fuel Test: Results, TAE, 2015.

A. J. Janssen, Tailor-made fuels from biomass for homogeneous low-temperature diesel combustion, Energy and Fuels, vol.25, pp.4734-4744, 2011.

D. Klein and S. Pischinger, Laser-induced Incadescence Measurement of Tailor-Made Fuel in an Optical Single Cylinder Diesel Engine, SAE Int. J. Engines, vol.10, issue.3, 2017.

W. Koch, S. Eiden, S. Feldhoff, and D. Diarra, Development of a new stability test method for bio heating oils, DGMK Research-Report, vol.763, 2017.

G. Puxty, Carbon Dioxide Postcombustion Capture: A Novel Screening Study of the Carbon Dioxide Absorption Performance of 76 Amines, Environ. Sci. Technol, vol.43, pp.6427-6433, 2009.

M. A. Ratcliff, R. L. Mccormick, and J. D. Taylor, Compendium of Experimental Cetane Numbers Compendium of Experimental Cetane Numbers, 2017.

K. J. Richards, P. K. Senecal, and E. Pomraning, CONVERGE 2.4 Manual, 2017.

T. Ryan and R. R. Maly, Fuel effects on engine combustion and emissions, Flow and combustion in reciprocating engines, pp.381-420, 2008.

M. Schrimpf, J. Esteban, T. Rösler, A. J. Vorholt, and W. Leitner, Intensified Reactors for Gas-Liquid-Liquid Multiphase Catalysis: from Chemistry to Engineering, Chem. Eng. J, vol.372, pp.917-939, 2019.

C. Sci, G. M. Torres, R. Frauenlob, A. Börner, and G. M. Torres, Production of Alcohols via Hydroformylation, Catal. Sci. Technol, vol.5, pp.34-54, 2015.

P. Seidenspinner, M. Härtl, T. Wilharm, and G. Wachtmeister, Cetane Number determination by Advanced Fuel Ignition delay Analysis in a New Constant Volume Combustion Chamber, 2015.

G. Shell and . Guide, Version 2.0, Synthetic Technology for cleaner air, Shell

M. J. Tijmensen, A. P. Faaij, C. N. Hamelinck, and M. R. Van-hardeveld, Exploration of the Possibilities for Production of Fischer Tropsch Liquids and Power via Biomass Gasification, Biomass and Bioenergy, vol.23, pp.129-52, 2002.

G. M. Torres, R. Frauenlob, R. Franke, and A. Börner, Production of alcohols via hydroformylation, Catal. Sci. Technol, vol.5, pp.34-54, 2015.

D. S. Viswanath, T. K. Ghosh, D. H. Prasad, N. V. Dutt, and K. Y. Rani, Viscosity of liquids: theory, estimation, experiment, and data, 2007.

H. Warmeling, D. Janz, M. Peters, and A. J. Vorholt, Acceleration of lean aqueous hydroformylation in an innovative jet loop reactor concept, Chem. Eng. J, vol.330, pp.585-595, 2017.

C. J. Mueller, W. J. Pitz, L. M. Pickett, G. C. Martin, D. L. Siebers et al., Effects of Oxygenates on Soot Processes in DI Diesel Engines, Experiments and Simulations, 2003.

J. L. Winkle, S. Van;-lorenzo, R. C. Morris, R. F. Mason, and M. Valley, United States Patent Office, 1969.

C. L. Yaws, Thermophysical properties of chemicals and hydrocarbons, 2008.